Merge bk://linux.bkbits.net/linux-2.5

into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs

Documentation/eisa.txt

@@ -46,12 +46,14 @@ root of an EISA bus. The eisa_root_device structure holds a reference
 to this device, as well as some parameters for probing purposes.
 
 struct eisa_root_device {
-        struct list_head node;
-        struct device   *dev;    /* Pointer to bridge device */
-        struct resource *res;
-        unsigned long    bus_base_addr;
-        int              slots;  /* Max slot number */
-        int              bus_nr; /* Set by eisa_root_register */
+	struct device   *dev;	 /* Pointer to bridge device */
+	struct resource *res;
+	unsigned long    bus_base_addr;
+	int		 slots;  /* Max slot number */
+	int		 force_probe; /* Probe even when no slot 0 */
+	u64		 dma_mask; /* from bridge device */
+	int              bus_nr; /* Set by eisa_root_register */
+	struct resource  eisa_root_res;	/* ditto */
 };
 
 node          : used for eisa_root_register internal purpose
@@ -59,6 +61,8 @@ dev           : pointer to the root device
 res           : root device I/O resource
 bus_base_addr : slot 0 address on this bus
 slots	      : max slot number to probe
+force_probe   : Probe even when slot 0 is empty (no EISA mainboard)
+dma_mask      : Default DMA mask. Usualy the bridge device dma_mask.
 bus_nr	      : unique bus id, set by eisa_root_register
 
 ** Driver :
@@ -87,7 +91,7 @@ driver		: a generic driver, such as described in
 		  Documentation/driver-model/driver.txt. Only .name,
 		  .probe and .remove members are mandatory.
 
-An example is the 3c509 driver :
+An example is the 3c59x driver :
 
 static struct eisa_device_id vortex_eisa_ids[] = {
 	{ "TCM5920", EISA_3C592_OFFSET },
@@ -116,15 +120,20 @@ encapsulated in a 'struct eisa_device' described as follows :
 struct eisa_device {
         struct eisa_device_id id;
         int                   slot;
-        unsigned long         base_addr;
-        struct resource       res;
+	int                   state;
+	unsigned long         base_addr;
+	struct resource       res[EISA_MAX_RESOURCES];
+	u64                   dma_mask;
         struct device         dev; /* generic device */
 };
 
 id	: EISA id, as read from device. id.driver_data is set from the
 	  matching driver EISA id.
 slot	: slot number which the device was detected on
-res	: I/O resource allocated to this device
+state   : set of flags indicating the state of the device. Current
+	  flags are EISA_CONFIG_ENABLED and EISA_CONFIG_FORCED.
+res	: set of four 256 bytes I/O regions allocated to this device
+dma_mask: DMA mask set from the parent device.
 dev	: generic device (see Documentation/driver-model/device.txt)
 
 You can get the 'struct eisa_device' from 'struct device' using the
@@ -140,6 +149,32 @@ void *eisa_get_drvdata (struct eisa_device *edev):
 
 Gets the pointer previously stored into the device's driver_data area.
 
+int eisa_get_region_index (void *addr);
+
+Returns the region number (0 <= x < EISA_MAX_RESOURCES) of a given
+address.
+
+** Kernel parameters :
+
+eisa_bus.enable_dev :
+
+A comma-separated list of slots to be enabled, even if the firmware
+set the card as disabled. The driver must be able to properly
+initialize the device in such conditions.
+
+eisa_bus.disable_dev :
+
+A comma-separated list of slots to be enabled, even if the firmware
+set the card as enabled. The driver won't be called to handle this
+device.
+
+virtual_root.force_probe :
+
+Force the probing code to probe EISA slots even when it cannot find an
+EISA compliant mainboard (nothing appears on slot 0). Defaultd to 0
+(don't force), and set to 1 (force probing) when either
+CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
+
 ** Random notes :
 
 Converting an EISA driver to the new API mostly involves *deleting*
@@ -156,10 +191,13 @@ Unfortunately, most drivers are doing the probing by themselves, and
 expect to have explored the whole machine when they exit their probe
 routine.
 
+For example, switching your favorite EISA SCSI card to the "hotplug"
+model is "the right thing"(tm).
+
 ** Thanks :
 
 I'd like to thank the following people for their help :
 - Xavier Benigni for lending me a wonderful Alpha Jensen,
 - James Bottomley, Jeff Garzik for getting this stuff into the kernel,
 - Andries Brouwer for contributing numerous EISA ids,
-- Catrin Jones for coping with too many machines at home
+- Catrin Jones for coping with far too many machines at home.

drivers/eisa/eisa-bus.c

 /*
  * EISA bus support functions for sysfs.
  *
- * (C) 2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
+ * (C) 2002, 2003 Marc Zyngier <maz@wild-wind.fr.eu.org>
  *
  * This code is released under the GPL version 2.
  */
@@ -10,6 +10,7 @@
 #include <linux/device.h>
 #include <linux/eisa.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
@@ -24,7 +25,7 @@ struct eisa_device_info {
 	char name[DEVICE_NAME_SIZE];
 };
 
-struct eisa_device_info __initdata eisa_table[] = {
+static struct eisa_device_info __initdata eisa_table[] = {
 #ifdef CONFIG_EISA_NAMES
 #include "devlist.h"
 #endif
@@ -32,6 +33,30 @@ struct eisa_device_info __initdata eisa_table[] = {
 
 #define EISA_INFOS (sizeof (eisa_table) / (sizeof (struct eisa_device_info)))
 
+#define EISA_MAX_FORCED_DEV 16
+#define EISA_FORCED_OFFSET  2
+
+static int enable_dev[EISA_MAX_FORCED_DEV + EISA_FORCED_OFFSET]  = { 1, EISA_MAX_FORCED_DEV, };
+static int disable_dev[EISA_MAX_FORCED_DEV + EISA_FORCED_OFFSET] = { 1, EISA_MAX_FORCED_DEV, };
+
+static int is_forced_dev (int *forced_tab,
+			  struct eisa_root_device *root,
+			  struct eisa_device *edev)
+{
+	int i, x;
+
+	for (i = 0; i < EISA_MAX_FORCED_DEV; i++) {
+		if (!forced_tab[EISA_FORCED_OFFSET + i])
+			return 0;
+
+		x = (root->bus_nr << 8) | edev->slot;
+		if (forced_tab[EISA_FORCED_OFFSET + i] == x)
+			return 1;
+	}
+
+	return 0;
+}
+
 static void __init eisa_name_device (struct eisa_device *edev)
 {
 	int i;
@@ -92,7 +117,8 @@ static int eisa_bus_match (struct device *dev, struct device_driver *drv)
 		return 0;
 
 	while (strlen (eids->sig)) {
-		if (!strcmp (eids->sig, edev->id.sig)) {
+		if (!strcmp (eids->sig, edev->id.sig) &&
+		    edev->state & EISA_CONFIG_ENABLED) {
 			edev->id.driver_data = eids->driver_data;
 			return 1;
 		}
@@ -132,41 +158,160 @@ static ssize_t eisa_show_sig (struct device *dev, char *buf)
 
 static DEVICE_ATTR(signature, S_IRUGO, eisa_show_sig, NULL);
 
-static int __init eisa_register_device (struct eisa_root_device *root,
-					struct eisa_device *edev,
-					char *sig, int slot)
+static ssize_t eisa_show_state (struct device *dev, char *buf)
+{
+        struct eisa_device *edev = to_eisa_device (dev);
+        return sprintf (buf,"%d\n", edev->state & EISA_CONFIG_ENABLED);
+}
+
+static DEVICE_ATTR(enabled, S_IRUGO, eisa_show_state, NULL);
+
+static int __init eisa_init_device (struct eisa_root_device *root,
+				    struct eisa_device *edev,
+				    int slot)
 {
+	char *sig;
+        unsigned long sig_addr;
+	int i;
+
+	sig_addr = SLOT_ADDRESS (root, slot) + EISA_VENDOR_ID_OFFSET;
+
+	if (!(sig = decode_eisa_sig (sig_addr)))
+		return -1;	/* No EISA device here */
+	
 	memcpy (edev->id.sig, sig, EISA_SIG_LEN);
 	edev->slot = slot;
+	edev->state = inb (SLOT_ADDRESS (root, slot) + EISA_CONFIG_OFFSET) & EISA_CONFIG_ENABLED;
 	edev->base_addr = SLOT_ADDRESS (root, slot);
-	edev->dma_mask = 0xffffffff; /* Default DMA mask */
+	edev->dma_mask = root->dma_mask; /* Default DMA mask */
 	eisa_name_device (edev);
 	edev->dev.parent = root->dev;
 	edev->dev.bus = &eisa_bus_type;
 	edev->dev.dma_mask = &edev->dma_mask;
 	sprintf (edev->dev.bus_id, "%02X:%02X", root->bus_nr, slot);
 
-	edev->res.name  = edev->dev.name;
+	for (i = 0; i < EISA_MAX_RESOURCES; i++)
+		edev->res[i].name  = edev->dev.name;
+
+	if (is_forced_dev (enable_dev, root, edev))
+		edev->state = EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED;
+	
+	if (is_forced_dev (disable_dev, root, edev))
+		edev->state = EISA_CONFIG_FORCED;
+
+	return 0;
+}
 
+static int __init eisa_register_device (struct eisa_device *edev)
+{
 	if (device_register (&edev->dev))
 		return -1;
 
 	device_create_file (&edev->dev, &dev_attr_signature);
+	device_create_file (&edev->dev, &dev_attr_enabled);
+
+	return 0;
+}
+
+static int __init eisa_request_resources (struct eisa_root_device *root,
+					  struct eisa_device *edev,
+					  int slot)
+{
+	int i;
+
+	for (i = 0; i < EISA_MAX_RESOURCES; i++) {
+		/* Don't register resource for slot 0, since this is
+		 * very likely to fail... :-( Instead, grab the EISA
+		 * id, now we can display something in /proc/ioports.
+		 */
+
+		/* Only one region for mainboard */
+		if (!slot && i > 0) {
+			edev->res[i].start = edev->res[i].end = 0;
+			continue;
+		}
+		
+		if (slot) {
+			edev->res[i].name  = NULL;
+			edev->res[i].start = SLOT_ADDRESS (root, slot) + (i * 0x400);
+			edev->res[i].end   = edev->res[i].start + 0xff;
+			edev->res[i].flags = IORESOURCE_IO;
+		} else {
+			edev->res[i].name  = NULL;
+			edev->res[i].start = SLOT_ADDRESS (root, slot) + EISA_VENDOR_ID_OFFSET;
+			edev->res[i].end   = edev->res[i].start + 3;
+			edev->res[i].flags = IORESOURCE_BUSY;
+		}
+
+		if (request_resource (root->res, &edev->res[i]))
+			goto failed;
+	}
 
 	return 0;
+	
+ failed:
+	while (--i >= 0)
+		release_resource (&edev->res[i]);
+
+	return -1;
+}
+
+static void __init eisa_release_resources (struct eisa_device *edev)
+{
+	int i;
+
+	for (i = 0; i < EISA_MAX_RESOURCES; i++)
+		if (edev->res[i].start || edev->res[i].end)
+			release_resource (&edev->res[i]);
 }
 
 static int __init eisa_probe (struct eisa_root_device *root)
 {
         int i, c;
-        char *str;
-        unsigned long sig_addr;
 	struct eisa_device *edev;
 
         printk (KERN_INFO "EISA: Probing bus %d at %s\n",
 		root->bus_nr, root->dev->name);
+
+	/* First try to get hold of slot 0. If there is no device
+	 * here, simply fail, unless root->force_probe is set. */
 	
-        for (c = 0, i = 0; i <= root->slots; i++) {
+	if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL))) {
+		printk (KERN_ERR "EISA: Couldn't allocate mainboard slot\n");
+		return -ENOMEM;
+	}
+		
+	memset (edev, 0, sizeof (*edev));
+
+	if (eisa_request_resources (root, edev, 0)) {
+		printk (KERN_WARNING \
+			"EISA: Cannot allocate resource for mainboard\n");
+		kfree (edev);
+		if (!root->force_probe)
+			return -EBUSY;
+		goto force_probe;
+	}
+
+	if (eisa_init_device (root, edev, 0)) {
+		eisa_release_resources (edev);
+		kfree (edev);
+		if (!root->force_probe)
+			return -ENODEV;
+		goto force_probe;
+	}
+
+	printk (KERN_INFO "EISA: Mainboard %s detected.\n", edev->id.sig);
+
+	if (eisa_register_device (edev)) {
+		printk (KERN_ERR "EISA: Failed to register %s\n",
+			edev->id.sig);
+		eisa_release_resources (edev);
+		kfree (edev);
+	}
+	
+ force_probe:
+	
+        for (c = 0, i = 1; i <= root->slots; i++) {
 		if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL))) {
 			printk (KERN_ERR "EISA: Out of memory for slot %d\n",
 				i);
@@ -175,24 +320,7 @@ static int __init eisa_probe (struct eisa_root_device *root)
 		
 		memset (edev, 0, sizeof (*edev));
 
-		/* Don't register resource for slot 0, since this is
-		 * very likely to fail... :-( Instead, grab the EISA
-		 * id, now we can display something in /proc/ioports.
-		 */
-
-		if (i) {
-			edev->res.name  = NULL;
-			edev->res.start = SLOT_ADDRESS (root, i);
-			edev->res.end   = edev->res.start + 0xfff;
-			edev->res.flags = IORESOURCE_IO;
-		} else {
-			edev->res.name  = NULL;
-			edev->res.start = SLOT_ADDRESS (root, i) + EISA_VENDOR_ID_OFFSET;
-			edev->res.end   = edev->res.start + 3;
-			edev->res.flags = IORESOURCE_BUSY;
-		}
-	
-		if (request_resource (root->res, &edev->res)) {
+		if (eisa_request_resources (root, edev, i)) {
 			printk (KERN_WARNING \
 				"Cannot allocate resource for EISA slot %d\n",
 				i);
@@ -200,30 +328,41 @@ static int __init eisa_probe (struct eisa_root_device *root)
 			continue;
 		}
 
-		sig_addr = SLOT_ADDRESS (root, i) + EISA_VENDOR_ID_OFFSET;
-
-                if (!(str = decode_eisa_sig (sig_addr))) {
-			release_resource (&edev->res);
+                if (eisa_init_device (root, edev, i)) {
+			eisa_release_resources (edev);
 			kfree (edev);
 			continue;
 		}
 		
-		if (!i)
-			printk (KERN_INFO "EISA: Motherboard %s detected\n",
-				str);
-		else {
-			printk (KERN_INFO "EISA: slot %d : %s detected.\n",
-				i, str);
-
-			c++;
+		printk (KERN_INFO "EISA: slot %d : %s detected",
+			i, edev->id.sig);
+			
+		switch (edev->state) {
+		case EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED:
+			printk (" (forced enabled)");
+			break;
+
+		case EISA_CONFIG_FORCED:
+			printk (" (forced disabled)");
+			break;
+
+		case 0:
+			printk (" (disabled)");
+			break;
 		}
+			
+		printk (".\n");
 
-		if (eisa_register_device (root, edev, str, i)) {
-			printk (KERN_ERR "EISA: Failed to register %s\n", str);
-			release_resource (&edev->res);
+		c++;
+
+		if (eisa_register_device (edev)) {
+			printk (KERN_ERR "EISA: Failed to register %s\n",
+				edev->id.sig);
+			eisa_release_resources (edev);
 			kfree (edev);
 		}
         }
+
         printk (KERN_INFO "EISA: Detected %d card%s.\n", c, c == 1 ? "" : "s");
 
 	return 0;
@@ -274,6 +413,13 @@ static int __init eisa_init (void)
 	return 0;
 }
 
+/* Couldn't use intarray with checking on... :-( */
+#undef  param_check_intarray
+#define param_check_intarray(name, p)
+
+module_param(enable_dev,  intarray, 0444);
+module_param(disable_dev, intarray, 0444);
+
 postcore_initcall (eisa_init);
 
 EXPORT_SYMBOL (eisa_bus_type);

drivers/eisa/eisa.ids

@@ -504,6 +504,7 @@ DTK0001 "DTK PLM-3300I 80486 EISA Board"
 DTK0003 "DTK PLM-3331P EISACACHE486 33/25/50 MHZ"
 ECS0580 "DI-580A EISA SCSI Host Adapter"
 ECS0590 "DI-590 EISA SCSI Cache Host Adapter"
+EGL0101 "Eagle Technology EP3210 EtherXpert EISA Adapter"
 ELS8041 "ELSA  WINNER 1000  Enhanced VGA"
 ETI1001 "NE3300 Ethernet Rev. C & D"
 EVX0002 "PN-3000 System Board"
@@ -515,6 +516,9 @@ FIX1516 "15-16MB Memory Hole Patch - Netserver LF/LC 5/66"
 FSI2001 "ESA-200 ATM"
 FSI2002 "ESA-200A ATM"
 FSI2003 "ESA-200E ATM"
+GCI0101 "Gateway G/Ethernet 32EB -- 32-Bit EISA Bus Master Ethernet Adpater"
+GCI0102 "Gateway G/Ethernet 32EB -- 32-Bit EISA Bus Master Ethernet Adapter"
+GCI0103 "Gateway G/Ethernet 32EB -- 32-Bit EISA Bus Master Ethernet Adapter"
 GDT2001 "GDT2000/GDT2020 Fast-SCSI Cache Controller - Rev. 1.0"
 GDT3001 "GDT3000/GDT3020 Dual Channel SCSI Controller - Rev. 1.0"
 GDT3002 "GDT30x0A Cache Controller"
@@ -1138,12 +1142,14 @@ NON0501 "c't Universal 16-Bit Sound Adapter"
 NON0601 "c't Universal 8-Bit Adapter"
 NSS0011 "Newport Systems Solutions WNIC Adapter"
 NVL0701 "Novell NE3200 Bus Master Ethernet"
+NVL0702 "Novell NE3200T Bus Master Ethernet"
 NVL0901 "Novell NE2100 Ethernet/Cheapernet Adapter"
 NVL1001 "Novell NMSL (Netware Mirrored Server Link)"
 NVL1201 "Novell NE32HUB 32-bit Base EISA Adapter"
 NVL1301 "Novell NE32HUB 32-bit TPE EISA Adapter"
 NVL1401 "Novell NE32HUB PME ISA Adapter"
 NVL1501 "Novell NE2000PLUS Ethernet Adapter"
+NVL1801 "Eagle Technology NE3210 EISA Ethernet LAN Adapter"
 OLC0701 "Olicom ISA 16/4 Token-Ring Network Adapter"
 OLC0702 "Olicom OC-3117, ISA 16/4 Adapter (NIC)"
 OLC0801 "OC-3118 Olicom ISA 16/4 Token-Ring Network Adapter"

drivers/eisa/pci_eisa.c

@@ -20,7 +20,7 @@
 static struct eisa_root_device pci_eisa_root;
 
 static int __devinit pci_eisa_init (struct pci_dev *pdev,
-				  const struct pci_device_id *ent)
+				    const struct pci_device_id *ent)
 {
 	int rc;
 
@@ -35,6 +35,7 @@ static int __devinit pci_eisa_init (struct pci_dev *pdev,
 	pci_eisa_root.res	       = pdev->bus->resource[0];
 	pci_eisa_root.bus_base_addr    = pdev->bus->resource[0]->start;
 	pci_eisa_root.slots	       = EISA_MAX_SLOTS;
+	pci_eisa_root.dma_mask         = pdev->dma_mask;
 
 	if (eisa_root_register (&pci_eisa_root)) {
 		printk (KERN_ERR "pci_eisa : Could not register EISA root\n");

drivers/eisa/virtual_root.c

@@ -7,12 +7,22 @@
  * This code is released under the GPL version 2.
  */
 
+#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/eisa.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/init.h>
 
+#if defined(CONFIG_ALPHA_JENSEN) || defined(CONFIG_EISA_VLB_PRIMING)
+#define EISA_FORCE_PROBE_DEFAULT 1
+#else
+#define EISA_FORCE_PROBE_DEFAULT 0
+#endif
+
+static int force_probe = EISA_FORCE_PROBE_DEFAULT;
+
 /* The default EISA device parent (virtual root device).
  * Now use a platform device, since that's the obvious choice. */
 
@@ -29,6 +39,7 @@ static struct eisa_root_device eisa_bus_root = {
 	.bus_base_addr = 0,
 	.res	       = &ioport_resource,
 	.slots	       = EISA_MAX_SLOTS,
+	.dma_mask      = 0xffffffff,
 };
 
 static int virtual_eisa_root_init (void)
@@ -39,6 +50,8 @@ static int virtual_eisa_root_init (void)
                 return r;
         }
 
+	eisa_bus_root.force_probe = force_probe;
+	
 	eisa_root_dev.dev.driver_data = &eisa_bus_root;
 
 	if (eisa_root_register (&eisa_bus_root)) {
@@ -51,4 +64,6 @@ static int virtual_eisa_root_init (void)
 	return 0;
 }
 
+module_param (force_probe, int, 0444);
+
 device_initcall (virtual_eisa_root_init);

drivers/net/irda/irtty-sir.c

@@ -212,13 +212,6 @@ static int irtty_set_dtr_rts(struct sir_dev *dev, int dtr, int rts)
 /* called from sir_dev when there is more data to send
  * context is either netdev->hard_xmit or some transmit-completion bh
  * i.e. we are under spinlock here and must not sleep.
- *
- * Note: as of 2.5.44 the usb-serial driver calls down() on a semaphore
- * hence we are hitting the might_sleep bugcatcher. IMHO the whole tty-api
- * would be pretty pointless if write_room/write would be allowed to sleep.
- * Furthermore other tty ldiscs (like ppp) do also require the driver not
- * to sleep there. Hence this is considered a current limitation of
- * usb-serial.
  */
 
 static int irtty_do_write(struct sir_dev *dev, const unsigned char *ptr, size_t len)
@@ -269,16 +262,15 @@ static void irtty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	struct sirtty_cb *priv = tty->disc_data;
 	int	i;
 
-	if (unlikely(!priv || priv->magic!=IRTTY_MAGIC))
-		return;
-	/* Please use ASSERT - Fix ASSERT as needed - Jean II */
+	ASSERT(priv != NULL, return;);
+	ASSERT(priv->magic == IRTTY_MAGIC, return;);
 
 	if (unlikely(count==0))		/* yes, this happens */
 		return;
 
 	dev = priv->dev;
 	if (!dev) {
-		printk(KERN_ERR "%s(), not ready yet!\n", __FUNCTION__);
+		WARNING("%s(), not ready yet!\n", __FUNCTION__);
 		return;
 	}
 
@@ -306,8 +298,8 @@ static int irtty_receive_room(struct tty_struct *tty)
 {
 	struct sirtty_cb *priv = tty->disc_data;
 
-	if (unlikely(!priv || priv->magic!=IRTTY_MAGIC))
-		return 0;
+	ASSERT(priv != NULL, return 0;);
+	ASSERT(priv->magic == IRTTY_MAGIC, return 0;);
 
 	return 65536;  /* We can handle an infinite amount of data. :-) */
 }
@@ -323,8 +315,8 @@ static void irtty_write_wakeup(struct tty_struct *tty)
 {
 	struct sirtty_cb *priv = tty->disc_data;
 
-	if (unlikely(!priv || priv->magic!=IRTTY_MAGIC))
-		return;
+	ASSERT(priv != NULL, return;);
+	ASSERT(priv->magic == IRTTY_MAGIC, return;);
 
 	tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
 
@@ -559,7 +551,7 @@ static int irtty_open(struct tty_struct *tty)
 
 	up(&irtty_sem);
 
-	printk(KERN_INFO "%s - done\n", __FUNCTION__);
+	IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __FUNCTION__, tty->name);
 
 	return 0;
 
@@ -580,8 +572,8 @@ static void irtty_close(struct tty_struct *tty)
 {
 	struct sirtty_cb *priv = tty->disc_data;
 
-	if (!priv  ||  priv->magic != IRTTY_MAGIC)
-		return;
+	ASSERT(priv != NULL, return;);
+	ASSERT(priv->magic == IRTTY_MAGIC, return;);
 
 	/* Hm, with a dongle attached the dongle driver wants
 	 * to close the dongle - which requires the use of
@@ -610,6 +602,8 @@ static void irtty_close(struct tty_struct *tty)
 		tty->driver->stop(tty);
 
 	kfree(priv);
+
+	IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __FUNCTION__, tty->name);
 }
 
 /* ------------------------------------------------------- */

drivers/net/irda/sir_dev.c

@@ -201,14 +201,12 @@ void sirdev_write_complete(struct sir_dev *dev)
 int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count) 
 {
 	if (!dev || !dev->netdev) {
-		IRDA_DEBUG(0, "%s(), not ready yet!\n", __FUNCTION__);
-		/* Use WARNING instead of IRDA_DEBUG */
+		WARNING("%s(), not ready yet!\n", __FUNCTION__);
 		return -1;
 	}
 
 	if (!dev->irlap) {
-		IRDA_DEBUG(0, "%s - too early: %p / %d!\n", __FUNCTION__, cp, count);
-		/* Use WARNING instead of IRDA_DEBUG */
+		WARNING("%s - too early: %p / %d!\n", __FUNCTION__, cp, count);
 		return -1;
 	}
 
@@ -218,7 +216,7 @@ int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count)
 		 */
 		irda_device_set_media_busy(dev->netdev, TRUE);
 		dev->stats.rx_dropped++;
-		printk(KERN_INFO "%s; rx-drop: %d\n", __FUNCTION__, count);
+		IRDA_DEBUG(0, "%s; rx-drop: %d\n", __FUNCTION__, count);
 		return 0;
 	}
 
@@ -431,7 +429,6 @@ static int sirdev_alloc_buffers(struct sir_dev *dev)
 		return -ENOMEM;
 	skb_reserve(dev->rx_buff.skb, 1);
 	dev->rx_buff.head = dev->rx_buff.skb->data;
-	/* No need to memset the buffer, unless you are really pedantic */
 
 	dev->tx_buff.head = kmalloc(dev->tx_buff.truesize, GFP_KERNEL);
 	if (dev->tx_buff.head == NULL) {
@@ -439,8 +436,6 @@ static int sirdev_alloc_buffers(struct sir_dev *dev)
 		dev->rx_buff.skb = NULL;
 		dev->rx_buff.head = NULL;
 		return -ENOMEM;
-		/* Hu ??? This should not be here, Martin ? */
-		memset(dev->tx_buff.head, 0, dev->tx_buff.truesize);
 	}
 
 	dev->tx_buff.data = dev->tx_buff.head;
@@ -492,7 +487,7 @@ static int sirdev_open(struct net_device *ndev)
 
 	netif_wake_queue(ndev);
 
-	printk(KERN_INFO "%s - done, speed = %d\n", __FUNCTION__, dev->speed);
+	IRDA_DEBUG(2, "%s - done, speed = %d\n", __FUNCTION__, dev->speed);
 
 	return 0;
 
@@ -512,7 +507,7 @@ static int sirdev_close(struct net_device *ndev)
 	struct sir_dev *dev = ndev->priv;
 	const struct sir_driver *drv;
 
-	printk(KERN_INFO "%s\n", __FUNCTION__);
+//	IRDA_DEBUG(0, "%s\n", __FUNCTION__);
 
 	netif_stop_queue(ndev);
 
@@ -570,7 +565,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	struct net_device *ndev;
 	struct sir_dev *dev;
 
-	printk(KERN_INFO "%s - %s\n", __FUNCTION__, name);
+	IRDA_DEBUG(0, "%s - %s\n", __FUNCTION__, name);
 
 	/* instead of adding tests to protect against drv->do_write==NULL
 	 * at several places we refuse to create a sir_dev instance for
@@ -584,8 +579,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	 */
 	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
-		printk(KERN_ERR "IrDA: Can't allocate memory for "
-		       "IrDA control block!\n");
+		ERROR("%s - Can't allocate memory for IrDA control block!\n", __FUNCTION__);
 		goto out;
 	}
 	memset(dev, 0, sizeof(*dev));
@@ -638,7 +632,7 @@ int sirdev_put_instance(struct sir_dev *dev)
 {
 	int err = 0;
 
-	printk(KERN_INFO "%s\n", __FUNCTION__);
+	IRDA_DEBUG(0, "%s\n", __FUNCTION__);
 
 	atomic_set(&dev->enable_rx, 0);
 

drivers/net/irda/sir_kthread.c

@@ -19,6 +19,7 @@
 #include <linux/smp_lock.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
+#include <linux/suspend.h>
 
 #include <net/irda/irda.h>
 
@@ -107,44 +108,12 @@ static void run_irda_queue(void)
 	spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
 }		
 
-static int irda_rt_prio = 0;		/* MODULE_PARM? */
-
 static int irda_thread(void *startup)
 {
 	DECLARE_WAITQUEUE(wait, current);
 
 	daemonize("kIrDAd");
 
-	set_fs(KERNEL_DS);
-
-	if (irda_rt_prio > 0) {
-#if 0		/* works but requires EXPORT_SYMBOL(setscheduler) */
-		struct sched_param param;
-
-		param.sched_priority = irda_rt_prio;
-		setscheduler(0, SCHED_FIFO, &param);
-#endif
-
-#if 0		/* doesn't work - has some tendency to trigger instant reboot!
-		 * looks like we would have to deactivate current on the
-		 * runqueue - which is only possible inside of kernel/sched.h
-		 */
-
-		/* runqueues are per-cpu and we are current on this cpu. Hence
-		 * The tasklist_lock with irq-off protects our runqueue too
-		 * and we don't have to lock it (which would be impossible,
-		 * because it is private in kernel/sched.c)
-		 */
-
-		read_lock_irq(&tasklist_lock);
-		current->rt_priority = (irda_rt_prio<MAX_RT_PRIO)
-					? irda_rt_prio : MAX_RT_PRIO-1;
-		current->policy = SCHED_FIFO;
-		current->prio = MAX_USER_RT_PRIO-1 - irda_rt_prio;
-		read_unlock_irq(&tasklist_lock);
-#endif
-	}
-
 	irda_rq_queue.thread = current;
 
 	complete((struct completion *)startup);
@@ -166,6 +135,10 @@ static int irda_thread(void *startup)
 			set_task_state(current, TASK_RUNNING);
 		remove_wait_queue(&irda_rq_queue.kick, &wait);
 
+		/* make swsusp happy with our thread */
+		if (current->flags & PF_FREEZE)
+			refrigerator(PF_IOTHREAD);
+
 		run_irda_queue();
 	}
 
@@ -442,7 +415,6 @@ static void irda_config_fsm(void *data)
 		case SIRDEV_STATE_COMPLETE:
 			/* config change finished, so we are not busy any longer */
 			sirdev_enable_rx(dev);
-			printk(KERN_INFO "%s - up\n", __FUNCTION__);
 			up(&fsm->sem);
 			return;
 		}
@@ -462,9 +434,7 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par
 	struct sir_fsm *fsm = &dev->fsm;
 	int xmit_was_down;
 
-//	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
-
-	printk(KERN_INFO "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
+	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
 
 	if (in_interrupt()) {
 		if (down_trylock(&fsm->sem)) {
@@ -474,12 +444,10 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par
 	}
 	else
 		down(&fsm->sem);
-	printk(KERN_INFO "%s - down\n", __FUNCTION__);
 
 	if (fsm->state == SIRDEV_STATE_DEAD) {
 		/* race with sirdev_close should never happen */
 		ERROR("%s(), instance staled!\n", __FUNCTION__);
-		printk(KERN_INFO "%s - up\n", __FUNCTION__);
 		up(&fsm->sem);
 		return -ESTALE;		/* or better EPIPE? */
 	}
@@ -501,7 +469,6 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par
 		atomic_set(&dev->enable_rx, 1);
 		if (!xmit_was_down)
 			netif_wake_queue(dev->netdev);		
-		printk(KERN_INFO "%s - up\n", __FUNCTION__);
 		up(&fsm->sem);
 		return -EAGAIN;
 	}

drivers/parisc/eisa.c

@@ -378,19 +378,21 @@ static int __devinit eisa_probe(struct parisc_device *dev)
 		}
 	}
 	eisa_eeprom_init(eisa_dev.eeprom_addr);
-	eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space, &eisa_dev.hba.lmmio_space);
+	result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space, &eisa_dev.hba.lmmio_space);
 	init_eisa_pic();
 
-	/* FIXME : Get the number of slots from the enumerator, not a
-	 * hadcoded value. Also don't enumerate the bus twice. */
-	eisa_dev.root.dev = &dev->dev;
-	dev->dev.driver_data = &eisa_dev.root;
-	eisa_dev.root.bus_base_addr = 0;
-	eisa_dev.root.res = &eisa_dev.hba.io_space;
-	eisa_dev.root.slots = EISA_MAX_SLOTS;
-	if (eisa_root_register (&eisa_dev.root)) {
-		printk(KERN_ERR "EISA: Failed to register EISA root\n");
-		return -1;
+	if (result >= 0) {
+		/* FIXME : Don't enumerate the bus twice. */
+		eisa_dev.root.dev = &dev->dev;
+		dev->dev.driver_data = &eisa_dev.root;
+		eisa_dev.root.bus_base_addr = 0;
+		eisa_dev.root.res = &eisa_dev.hba.io_space;
+		eisa_dev.root.slots = result;
+		eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */
+		if (eisa_root_register (&eisa_dev.root)) {
+			printk(KERN_ERR "EISA: Failed to register EISA root\n");
+			return -1;
+		}
 	}
 	
 	return 0;

drivers/parisc/eisa_enumerator.c

@@ -438,6 +438,10 @@ static int init_slot(int slot, struct eeprom_eisa_slot_info *es)
 		id = le32_to_cpu(inl(SLOT2PORT(slot)+EPI));
 		
 		if (0xffffffff == id) {
+			/* Maybe we didn't expect a card to be here... */
+			if (es->eisa_slot_id == 0xffffffff)
+				return -1;
+			
 			/* this board is not here or it does not 
 			 * support readid 
 			 */
@@ -499,8 +503,7 @@ int eisa_enumerator(unsigned long eeprom_addr,
 			(&eeprom_buf[HPEE_SLOT_INFO(i)]);
 	        
 		if (-1==init_slot(i+1, es)) {
-			return -1;
-			
+			continue;
 		}
 		
 		if (es->config_data_offset < HPEE_MAX_LENGTH) {
@@ -513,6 +516,6 @@ int eisa_enumerator(unsigned long eeprom_addr,
 			return -1;
 		}
 	}
-	return 0;
+	return eh->num_slots;
 }
 

drivers/scsi/scsi_scan.c

@@ -646,7 +646,7 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
 	sdev->max_device_blocked = SCSI_DEFAULT_DEVICE_BLOCKED;
 
 	sdev->use_10_for_rw = 1;
-	sdev->use_10_for_ms = 1;
+	sdev->use_10_for_ms = 0;
 
 	if(sdev->host->hostt->slave_configure)
 		sdev->host->hostt->slave_configure(sdev);

include/linux/eisa.h

@@ -4,6 +4,8 @@
 #define EISA_SIG_LEN   8
 #define EISA_MAX_SLOTS 8
 
+#define EISA_MAX_RESOURCES 4
+
 /* A few EISA constants/offsets... */
 
 #define EISA_DMA1_STATUS            8
@@ -17,6 +19,10 @@
 #define EISA_INT1_EDGE_LEVEL    0x4D0
 #define EISA_INT2_EDGE_LEVEL    0x4D1
 #define EISA_VENDOR_ID_OFFSET   0xC80
+#define EISA_CONFIG_OFFSET      0xC84
+
+#define EISA_CONFIG_ENABLED         1
+#define EISA_CONFIG_FORCED          2
 
 /* The EISA signature, in ASCII form, null terminated */
 struct eisa_device_id {
@@ -26,19 +32,28 @@ struct eisa_device_id {
 
 /* There is not much we can say about an EISA device, apart from
  * signature, slot number, and base address. dma_mask is set by
- * default to 32 bits.*/
+ * default to parent device mask..*/
 
 struct eisa_device {
 	struct eisa_device_id id;
 	int                   slot;
+	int                   state;
 	unsigned long         base_addr;
-	struct resource       res;
+	struct resource       res[EISA_MAX_RESOURCES];
 	u64                   dma_mask;
 	struct device         dev; /* generic device */
 };
 
 #define to_eisa_device(n) container_of(n, struct eisa_device, dev)
 
+static inline int eisa_get_region_index (void *addr)
+{
+	unsigned long x = (unsigned long) addr;
+
+	x &= 0xc00;
+	return (x >> 12);
+}
+
 struct eisa_driver {
 	const struct eisa_device_id *id_table;
 	struct device_driver         driver;
@@ -69,6 +84,8 @@ struct eisa_root_device {
 	struct resource *res;
 	unsigned long    bus_base_addr;
 	int		 slots;  /* Max slot number */
+	int		 force_probe; /* Probe even when no slot 0 */
+	u64		 dma_mask; /* from bridge device */
 	int              bus_nr; /* Set by eisa_root_register */
 	struct resource  eisa_root_res;	/* ditto */
 };