Commit 29a50a8b authored by Kim Phillips's avatar Kim Phillips Committed by Kumar Gala

[POWERPC] 83xx: Handle mpc8360 rev. 2.1 RGMII timing erratum

If on a rev. 2.1, adjust UCC clock and data timing characteristics
as specified in the rev.2.1 erratum #2.
Signed-off-by: default avatarKim Phillips <kim.phillips@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 34be4561
......@@ -96,14 +96,39 @@ static void __init mpc836x_mds_setup_arch(void)
if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
!= NULL){
uint svid;
/* Reset the Ethernet PHY */
bcsr_regs[9] &= ~0x20;
#define BCSR9_GETHRST 0x20
clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
udelay(1000);
bcsr_regs[9] |= 0x20;
setbits8(&bcsr_regs[9], BCSR9_GETHRST);
/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
svid = mfspr(SPRN_SVR);
if (svid == 0x80480021) {
void __iomem *immap;
immap = ioremap(get_immrbase() + 0x14a8, 8);
/*
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
*/
setbits32(immap, 0x0c003000);
/*
* IMMR + 0x14AC[20:27] = 10101010
* (data delay for both UCC's)
*/
clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
iounmap(immap);
}
iounmap(bcsr_regs);
of_node_put(np);
}
#endif /* CONFIG_QUICC_ENGINE */
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment