arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driver

Add dai link for supporting lpass I2S driver, which is used
for audio capture and playback.
Add lpass-cpu node with pin controls and i2s primary
and secondary dai-links.
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210314061054.19451-2-srivasam@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi

@@ -9,6 +9,7 @@
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/sc7180-lpass.h>
 
 /* PMICs depend on spmi_bus label and so must come after SoC */
 #include "pm6150.dtsi"
@@ -283,6 +284,42 @@ keyboard_backlight: keyboard-backlight {
 			max-brightness = <1023>;
 		};
 	};
+
+	sound: sound {
+		compatible = "google,sc7180-trogdor";
+		model = "sc7180-rt5682-max98357a-1mic";
+
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MultiMedia0";
+			reg = <MI2S_PRIMARY>;
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			sound_multimedia0_codec: codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "MultiMedia1";
+			reg = <MI2S_SECONDARY>;
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			sound_multimedia1_codec: codec {
+				sound-dai = <&max98357a>;
+			};
+		};
+	};
 };
 
 &qfprom {
@@ -720,6 +757,27 @@ &ipa {
 	modem-init;
 };
 
+&lpass_cpu {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sec_mi2s_active>, <&pri_mi2s_active>, <&pri_mi2s_mclk_active>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	mi2s@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	mi2s@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+};
+
 &mdp {
 	status = "okay";
 };