Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] pxa: spitz wants PXA27x UDC definitions
  [ARM] pxa: fix pxafb build when cpufreq is enabled
  [ARM] fix parenthesis in include/asm-arm/arch-omap/control.h
  [ARM] colibri: fix support for DM9000 ethernet device
  [ARM] arm/kernel/arthur.c: add MODULE_LICENSE
  [ARM] 5037/1: Orion: fix DNS323/Kurobox Pro PCI initialisation
  [ARM] 5034/1: fix arm{925,926,940,946} dma_flush_range() in WT mode
  [ARM] export copy_page
  [ARM] 5026/1: locomo: add .settype for gpio and several small fixes
  ARM: OMAP: Fixed comments on global PRM register usage
  ARM: OMAP: Add PARENT_CONTROLS_CLOCK flag to dpll5_m2_ck
  ARM: OMAP: PRCM fixes to ssi clock handling
  ARM: OMAP: Add fuctional clock enabler for iva2
  ARM: OMAP: Fix 34xx to use correct shift values for gpio2-6 fclks
  ARM: OMAP: Keymap fix for palmte and palmz71
  ARM: OMAP: Fix Unbalanced enable for IRQ in omap mailbox
  ARM: OMAP: DMA: Fix incorrect channel linking
  ARM: OMAP: Warn on disabling clocks with no users
  ARM: OMAP: Add calls to omap2_set_globals_*()
  ARM: OMAP: Update MMC header to fix compile

arch/arm/common/locomo.c

@@ -321,11 +321,42 @@ static void locomo_gpio_unmask_irq(unsigned int irq)
 	locomo_writel(r, mapbase + LOCOMO_GIE);
 }
 
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+
+static int locomo_gpio_type(unsigned int irq, unsigned int type)
+{
+	unsigned int mask;
+	void __iomem *mapbase = get_irq_chip_data(irq);
+
+	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
+
+	if (type == IRQT_PROBE) {
+		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+			return 0;
+		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+	}
+
+	if (type & __IRQT_RISEDGE)
+		GPIO_IRQ_rising_edge |= mask;
+	else
+		GPIO_IRQ_rising_edge &= ~mask;
+	if (type & __IRQT_FALEDGE)
+		GPIO_IRQ_falling_edge |= mask;
+	else
+		GPIO_IRQ_falling_edge &= ~mask;
+	locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
+	locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
+
+	return 0;
+}
+
 static struct irq_chip locomo_gpio_chip = {
-	.name	= "LOCOMO-gpio",
-	.ack	= locomo_gpio_ack_irq,
-	.mask	= locomo_gpio_mask_irq,
-	.unmask	= locomo_gpio_unmask_irq,
+	.name	  = "LOCOMO-gpio",
+	.ack	  = locomo_gpio_ack_irq,
+	.mask	  = locomo_gpio_mask_irq,
+	.unmask	  = locomo_gpio_unmask_irq,
+	.set_type = locomo_gpio_type,
 };
 
 static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
@@ -450,22 +481,18 @@ static void locomo_setup_irq(struct locomo *lchip)
 	set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
-	set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
-	set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
-	set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
 
 	set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
 	set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
 	set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
-	set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
 
 	/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
 	set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
@@ -488,7 +515,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
 
 	/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
-	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
+	for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
 		set_irq_chip(irq, &locomo_spi_chip);
 		set_irq_chip_data(irq, irqbase);
 		set_irq_handler(irq, handle_edge_irq);
@@ -574,20 +601,20 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
 
 	save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPO);
-	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPICT);	/* SPI */
+	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT);	/* SPI */
 	locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
 	save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPE);
 	save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);	/* ADSTART */
 	locomo_writel(0x00, lchip->base + LOCOMO_ASD);
-	save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPIMD);	/* SPI */
-	locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD);
+	save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);	/* SPI */
+	locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
 
 	locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
 	locomo_writel(0x00, lchip->base + LOCOMO_DAC);
 	locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
 
-	if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) )
+	if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
 		locomo_writel(0x00, lchip->base + LOCOMO_C32K); 	/* CLK32 off */
 	else
 		/* 18MHz already enabled, so no wait */
@@ -616,10 +643,10 @@ static int locomo_resume(struct platform_device *dev)
 	spin_lock_irqsave(&lchip->lock, flags);
 
 	locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
-	locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT);
+	locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
 	locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
 	locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
-	locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD);
+	locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
 
 	locomo_writel(0x00, lchip->base + LOCOMO_C32K);
 	locomo_writel(0x90, lchip->base + LOCOMO_TADC);
@@ -688,9 +715,9 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 
 	/* GPIO */
 	locomo_writel(0, lchip->base + LOCOMO_GPO);
-	locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
 			, lchip->base + LOCOMO_GPE);
-	locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
 			, lchip->base + LOCOMO_GPD);
 	locomo_writel(0, lchip->base + LOCOMO_GIE);
 
@@ -833,7 +860,10 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
 	spin_lock_irqsave(&lchip->lock, flags);
 
 	r = locomo_readl(lchip->base + LOCOMO_GPD);
-	r &= ~bits;
+	if (dir)
+		r |= bits;
+	else
+		r &= ~bits;
 	locomo_writel(r, lchip->base + LOCOMO_GPD);
 
 	r = locomo_readl(lchip->base + LOCOMO_GPE);

arch/arm/kernel/armksyms.c

@@ -179,3 +179,5 @@ EXPORT_SYMBOL(_find_next_zero_bit_be);
 EXPORT_SYMBOL(_find_first_bit_be);
 EXPORT_SYMBOL(_find_next_bit_be);
 #endif
+
+EXPORT_SYMBOL(copy_page);

arch/arm/kernel/arthur.c

@@ -90,3 +90,5 @@ static void __exit arthur_exit(void)
 
 module_init(arthur_init);
 module_exit(arthur_exit);
+
+MODULE_LICENSE("GPL");

arch/arm/mach-omap1/board-palmte.c

@@ -63,7 +63,7 @@ static const int palmte_keymap[] = {
 	KEY(1, 1, KEY_DOWN),
 	KEY(1, 2, KEY_UP),
 	KEY(1, 3, KEY_RIGHT),
-	KEY(1, 4, KEY_CENTER),
+	KEY(1, 4, KEY_ENTER),
 	0,
 };
 

arch/arm/mach-omap1/board-palmz71.c

@@ -65,7 +65,7 @@ static int palmz71_keymap[] = {
 	KEY(1, 1, KEY_DOWN),
 	KEY(1, 2, KEY_UP),
 	KEY(1, 3, KEY_RIGHT),
-	KEY(1, 4, KEY_CENTER),
+	KEY(1, 4, KEY_ENTER),
 	KEY(2, 0, KEY_CAMERA),
 	0,
 };

arch/arm/mach-omap2/board-2430sdp.c

@@ -208,6 +208,7 @@ static void __init omap_2430sdp_init(void)
 
 static void __init omap_2430sdp_map_io(void)
 {
+	omap2_set_globals_243x();
 	omap2_map_common_io();
 }
 

arch/arm/mach-omap2/board-apollon.c

@@ -394,6 +394,7 @@ static void __init omap_apollon_init(void)
 
 static void __init omap_apollon_map_io(void)
 {
+	omap2_set_globals_242x();
 	omap2_map_common_io();
 }
 

arch/arm/mach-omap2/board-generic.c

@@ -65,6 +65,7 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
+	omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
 	omap2_map_common_io();
 }
 

arch/arm/mach-omap2/board-h4.c

@@ -420,6 +420,7 @@ static void __init omap_h4_init(void)
 
 static void __init omap_h4_map_io(void)
 {
+	omap2_set_globals_242x();
 	omap2_map_common_io();
 }
 

arch/arm/mach-omap2/clock.c

@@ -205,7 +205,9 @@ static void omap2_clk_wait_ready(struct clk *clk)
 	/* REVISIT: What are the appropriate exclusions for 34XX? */
 	/* OMAP3: ignore DSS-mod clocks */
 	if (cpu_is_omap34xx() &&
-	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
+	     ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
+	     clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
 		return;
 
 	/* Check if both functional and interface clocks

arch/arm/mach-omap2/clock34xx.h

@@ -836,7 +836,8 @@ static struct clk dpll5_m2_ck = {
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
 	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
 	.clksel		= div16_dpll5_clksel,
-	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1046,12 +1047,13 @@ static struct clk iva2_ck = {
 	.name		= "iva2_ck",
 	.parent		= &dpll2_m2_ck,
 	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
 					  OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
 	.clksel		= iva2_clksel,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
-				PARENT_CONTROLS_CLOCK,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1836,7 +1838,8 @@ static struct clk omapctrl_ick = {
 static struct clk ssi_l4_ick = {
 	.name		= "ssi_l4_ick",
 	.parent		= &l4_ick,
-	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2344,7 +2347,7 @@ static struct clk gpio6_fck = {
 	.name		= "gpio6_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2353,7 +2356,7 @@ static struct clk gpio5_fck = {
 	.name		= "gpio5_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2362,7 +2365,7 @@ static struct clk gpio4_fck = {
 	.name		= "gpio4_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2371,7 +2374,7 @@ static struct clk gpio3_fck = {
 	.name		= "gpio3_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };
@@ -2380,7 +2383,7 @@ static struct clk gpio2_fck = {
 	.name		= "gpio2_fck",
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
 	.flags		= CLOCK_IN_OMAP343X,
 	.recalc		= &followparent_recalc,
 };

arch/arm/mach-omap2/cm-regbits-34xx.h

@@ -56,6 +56,7 @@
 
 /* CM_FCLKEN_IVA2 */
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2			(1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
 
 /* CM_CLKEN_PLL_IVA2 */
 #define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT		8

arch/arm/mach-omap2/mailbox.c

@@ -70,6 +70,9 @@ struct omap_mbox2_priv {
 
 static struct clk *mbox_ick_handle;
 
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+				  omap_mbox_type_t irq);
+
 static inline unsigned int mbox_read_reg(unsigned int reg)
 {
 	return __raw_readl(mbox_base + reg);
@@ -81,7 +84,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg)
 }
 
 /* Mailbox H/W preparations */
-static inline int omap2_mbox_startup(struct omap_mbox *mbox)
+static int omap2_mbox_startup(struct omap_mbox *mbox)
 {
 	unsigned int l;
 
@@ -97,38 +100,40 @@ static inline int omap2_mbox_startup(struct omap_mbox *mbox)
 	l |= 0x00000011;
 	mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
+	omap2_mbox_enable_irq(mbox, IRQ_RX);
+
 	return 0;
 }
 
-static inline void omap2_mbox_shutdown(struct omap_mbox *mbox)
+static void omap2_mbox_shutdown(struct omap_mbox *mbox)
 {
 	clk_disable(mbox_ick_handle);
 	clk_put(mbox_ick_handle);
 }
 
 /* Mailbox FIFO handle functions */
-static inline mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
+static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
 	return (mbox_msg_t) mbox_read_reg(fifo->msg);
 }
 
-static inline void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
 	mbox_write_reg(msg, fifo->msg);
 }
 
-static inline int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
 	return (mbox_read_reg(fifo->msg_stat) == 0);
 }
 
-static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
@@ -136,7 +141,7 @@ static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 }
 
 /* Mailbox IRQ handle functions */
-static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -147,7 +152,7 @@ static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 	mbox_write_reg(l, p->irqenable);
 }
 
-static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -158,7 +163,7 @@ static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 	mbox_write_reg(l, p->irqenable);
 }
 
-static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
+static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -167,7 +172,7 @@ static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 	mbox_write_reg(bit, p->irqstatus);
 }
 
-static inline int omap2_mbox_is_irq(struct omap_mbox *mbox,
+static int omap2_mbox_is_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;

arch/arm/mach-omap2/prm.h

@@ -30,7 +30,7 @@
 
 /*
  * Architecture-specific global PRM registers
- * Use prm_{read,write}_reg() with these registers.
+ * Use __raw_{read,write}l() with these registers.
  *
  * With a few exceptions, these are the register names beginning with
  * PRCM_* on 24xx, and PRM_* on 34xx.  (The exceptions are the

arch/arm/mach-orion5x/dns323-setup.c

@@ -58,7 +58,7 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci dns323_pci __initdata = {
-	.nr_controllers = 1,
+	.nr_controllers = 2,
 	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,

arch/arm/mach-orion5x/kurobox_pro-setup.c

@@ -138,7 +138,7 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static struct hw_pci kurobox_pro_pci __initdata = {
-	.nr_controllers	= 1,
+	.nr_controllers	= 2,
 	.swizzle	= pci_std_swizzle,
 	.setup		= orion5x_pci_sys_setup,
 	.scan		= orion5x_pci_sys_scan_bus,

arch/arm/mach-pxa/colibri.c

@@ -98,7 +98,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= COLIBRI_ETH_IRQ,
 		.end	= COLIBRI_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
 
@@ -119,7 +119,6 @@ static void __init colibri_init(void)
 	/* DM9000 LAN */
 	pxa_gpio_mode(GPIO78_nCS_2_MD);
 	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-	set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
 
 	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }

arch/arm/mach-pxa/spitz.c

@@ -38,6 +38,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>

arch/arm/mm/proc-arm925.S

@@ -332,7 +332,7 @@ ENTRY(arm925_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1

arch/arm/mm/proc-arm926.S

@@ -295,7 +295,7 @@ ENTRY(arm926_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1

arch/arm/mm/proc-arm940.S

@@ -222,7 +222,7 @@ ENTRY(arm940_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D entry
 #else
-	mcr	p15, 0, r3, c7, c10, 2		@ clean D entry
+	mcr	p15, 0, r3, c7, c6, 2		@ invalidate D entry
 #endif
 	subs	r3, r3, #1 << 26
 	bcs	2b				@ entries 63 to 0

arch/arm/mm/proc-arm946.S

@@ -265,7 +265,7 @@ ENTRY(arm946_dma_flush_range)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 #else
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 #endif
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1

arch/arm/plat-omap/clock.c

@@ -134,9 +134,17 @@ void clk_disable(struct clk *clk)
 		return;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	BUG_ON(clk->usecount == 0);
+	if (clk->usecount == 0) {
+		printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+		       clk->name);
+		WARN_ON(1);
+		goto out;
+	}
+
 	if (arch_clock->clk_disable)
 		arch_clock->clk_disable(clk);
+
+out:
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);

arch/arm/plat-omap/dma.c

@@ -604,6 +604,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->data = data;
 #ifndef CONFIG_ARCH_OMAP1
 	chan->chain_id = -1;
+	chan->next_linked_ch = -1;
 #endif
 	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
@@ -1087,7 +1088,6 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
 			printk(KERN_ERR "omap_dma: Request failed %d\n", err);
 			return err;
 		}
-		dma_chan[channels[i]].next_linked_ch = -1;
 		dma_chan[channels[i]].prev_linked_ch = -1;
 		dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
 

arch/arm/plat-omap/mailbox.c

@@ -355,7 +355,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 			"failed to register mailbox interrupt:%d\n", ret);
 		goto fail_request_irq;
 	}
-	enable_mbox_irq(mbox, IRQ_RX);
 
 	mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
 	if (!mq) {

drivers/video/pxafb.c

@@ -355,9 +355,8 @@ static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	}
 
 #ifdef CONFIG_CPU_FREQ
-	pr_debug("pxafb: dma period = %d ps, clock = %d kHz\n",
-		 pxafb_display_dma_period(var),
-		 get_clk_frequency_khz(0));
+	pr_debug("pxafb: dma period = %d ps\n",
+		 pxafb_display_dma_period(var));
 #endif
 
 	return 0;

include/asm-arm/arch-omap/common.h

@@ -47,4 +47,8 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 }
 #endif
 
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */

include/asm-arm/arch-omap/control.h

@@ -80,7 +80,7 @@
 #define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
 #define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
 #define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
 #define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
 #define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
 #define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)

include/asm-arm/arch-omap/mmc.h

@@ -15,21 +15,16 @@
 #include <linux/device.h>
 #include <linux/mmc/host.h>
 
+#include <asm/arch/board.h>
+
 #define OMAP_MMC_MAX_SLOTS	2
 
 struct omap_mmc_platform_data {
 	struct omap_mmc_conf	conf;
 
-	unsigned enabled:1;
 	/* number of slots on board */
 	unsigned nr_slots:2;
-	/* nomux means "standard" muxing is wrong on this board, and that
-	 * board-specific code handled it before common init logic.
-	 */
-	unsigned nomux:1;
-	/* 4 wire signaling is optional, and is only used for SD/SDIO and
-	 * MMCv4 */
-	unsigned wire4:1;
+
 	/* set if your board has components or wiring that limits the
 	 * maximum frequency on the MMC bus */
 	unsigned int max_freq;
@@ -40,6 +35,11 @@ struct omap_mmc_platform_data {
 	 * not supported */
 	int (* init)(struct device *dev);
 	void (* cleanup)(struct device *dev);
+	void (* shutdown)(struct device *dev);
+
+	/* To handle board related suspend/resume functionality for MMC */
+	int (*suspend)(struct device *dev, int slot);
+	int (*resume)(struct device *dev, int slot);
 
 	struct omap_mmc_slot_data {
 		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
@@ -56,13 +56,19 @@ struct omap_mmc_platform_data {
 
 		const char *name;
 		u32 ocr_mask;
+
+		/* Card detection IRQs */
+		int card_detect_irq;
+		int (* card_detect)(int irq);
+
+		unsigned int ban_openended:1;
+
 	} slots[OMAP_MMC_MAX_SLOTS];
 };
 
 extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
 
 /* called from board-specific card detection service routine */
-extern void omap_mmc_notify_card_detect(struct device *dev, int slot, int detected);
 extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
 
 #endif

include/asm-arm/arch-sa1100/irqs.h

@@ -141,7 +141,7 @@
 #define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
 #define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
 #define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
 #define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
 
 /*

include/asm-arm/hardware/locomo.h

@@ -58,6 +58,11 @@
 #define LOCOMO_SPIMD	0x00		/* SPI mode setting */
 #define LOCOMO_SPICT	0x04		/* SPI mode control */
 #define LOCOMO_SPIST	0x08		/* SPI status */
+#define	LOCOMO_SPI_TEND	(1 << 3)	/* Transfer end bit */
+#define	LOCOMO_SPI_REND	(1 << 2)	/* Receive end bit */
+#define	LOCOMO_SPI_RFW	(1 << 1)	/* write buffer bit */
+#define	LOCOMO_SPI_RFR	(1)		/* read buffer bit */
+
 #define LOCOMO_SPIIS	0x10		/* SPI interrupt status */
 #define LOCOMO_SPIWE	0x14		/* SPI interrupt status write enable */
 #define LOCOMO_SPIIE	0x18		/* SPI interrupt enable */
@@ -66,16 +71,12 @@
 #define LOCOMO_SPIRD	0x24		/* SPI receive data read */
 #define LOCOMO_SPITS	0x28		/* SPI transfer data shift */
 #define LOCOMO_SPIRS	0x2C		/* SPI receive data shift */
-#define	LOCOMO_SPI_TEND	(1 << 3)	/* Transfer end bit */
-#define	LOCOMO_SPI_OVRN	(1 << 2)	/* Over Run bit */
-#define	LOCOMO_SPI_RFW	(1 << 1)	/* write buffer bit */
-#define	LOCOMO_SPI_RFR	(1)		/* read buffer bit */
 
 /* GPIO */
 #define LOCOMO_GPD		0x90	/* GPIO direction */
 #define LOCOMO_GPE		0x94	/* GPIO input enable */
 #define LOCOMO_GPL		0x98	/* GPIO level */
-#define LOCOMO_GPO		0x9c	/* GPIO out data setteing */
+#define LOCOMO_GPO		0x9c	/* GPIO out data setting */
 #define LOCOMO_GRIE		0xa0	/* GPIO rise detection */
 #define LOCOMO_GFIE		0xa4	/* GPIO fall detection */
 #define LOCOMO_GIS		0xa8	/* GPIO edge detection status */
@@ -96,6 +97,9 @@
 #define LOCOMO_GPIO_DAC_SDATA	LOCOMO_GPIO(10)
 #define LOCOMO_GPIO_DAC_SCK	LOCOMO_GPIO(11)
 #define LOCOMO_GPIO_DAC_SLOAD	LOCOMO_GPIO(12)
+#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define LOCOMO_GPIO_WRITE_PROT  LOCOMO_GPIO(14)
+#define LOCOMO_GPIO_CARD_POWER  LOCOMO_GPIO(15)
 
 /* Start the definitions of the devices.  Each device has an initial
  * base address and a series of offsets from that base address. */
@@ -122,7 +126,7 @@
 /* Audio controller */
 #define LOCOMO_AUDIO		0x54
 #define LOCOMO_ACC		0x00	/* Audio clock */
-#define LOCOMO_PAIF		0x7C	/* PCM audio interface */
+#define LOCOMO_PAIF		0xD0	/* PCM audio interface */
 /* Audio clock */
 #define	LOCOMO_ACC_XON		0x80
 #define	LOCOMO_ACC_XEN		0x40
@@ -162,7 +166,7 @@ extern struct bus_type locomo_bus_type;
 #define LOCOMO_DEVID_AUDIO	3
 #define LOCOMO_DEVID_LED	4
 #define LOCOMO_DEVID_UART	5
-#define LOCOMO_DEVID_SPI		6
+#define LOCOMO_DEVID_SPI	6
 
 struct locomo_dev {
 	struct device	dev;
@@ -204,7 +208,6 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits);
 int locomo_gpio_read_output(struct device *dev, unsigned int bits);
 void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
 
-
 /* M62332 control function */
 void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);