dmaengine: ti: edma: add missed operations

The driver forgets to call pm_runtime_disable and pm_runtime_put_sync in
probe failure and remove.
Add the calls and modify probe failure handling to fix it.

To simplify the fix, the patch adjusts the calling order and merges checks
for devm_kcalloc.

Fixes: 2b6b3b74 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191124052855.6472-1-hslester96@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/dma/ti/edma.c

@@ -2289,13 +2289,6 @@ static int edma_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENODEV;
 
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync() failed\n");
-		return ret;
-	}
-
 	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret)
 		return ret;
@@ -2326,27 +2319,31 @@ static int edma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ecc);
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
 	/* Get eDMA3 configuration from IP */
 	ret = edma_setup_from_hw(dev, info, ecc);
 	if (ret)
-		return ret;
+		goto err_disable_pm;
 
 	/* Allocate memory based on the information we got from the IP */
 	ecc->slave_chans = devm_kcalloc(dev, ecc->num_channels,
 					sizeof(*ecc->slave_chans), GFP_KERNEL);
-	if (!ecc->slave_chans)
-		return -ENOMEM;
 
 	ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
 				       sizeof(unsigned long), GFP_KERNEL);
-	if (!ecc->slot_inuse)
-		return -ENOMEM;
 
 	ecc->channels_mask = devm_kcalloc(dev,
 					   BITS_TO_LONGS(ecc->num_channels),
 					   sizeof(unsigned long), GFP_KERNEL);
-	if (!ecc->channels_mask)
-		return -ENOMEM;
+	if (!ecc->slave_chans || !ecc->slot_inuse || !ecc->channels_mask)
+		goto err_disable_pm;
 
 	/* Mark all channels available initially */
 	bitmap_fill(ecc->channels_mask, ecc->num_channels);
@@ -2388,7 +2385,7 @@ static int edma_probe(struct platform_device *pdev)
 				       ecc);
 		if (ret) {
 			dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
-			return ret;
+			goto err_disable_pm;
 		}
 		ecc->ccint = irq;
 	}
@@ -2404,7 +2401,7 @@ static int edma_probe(struct platform_device *pdev)
 				       ecc);
 		if (ret) {
 			dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
-			return ret;
+			goto err_disable_pm;
 		}
 		ecc->ccerrint = irq;
 	}
@@ -2412,7 +2409,8 @@ static int edma_probe(struct platform_device *pdev)
 	ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
 	if (ecc->dummy_slot < 0) {
 		dev_err(dev, "Can't allocate PaRAM dummy slot\n");
-		return ecc->dummy_slot;
+		ret = ecc->dummy_slot;
+		goto err_disable_pm;
 	}
 
 	queue_priority_mapping = info->queue_priority_mapping;
@@ -2512,6 +2510,9 @@ static int edma_probe(struct platform_device *pdev)
 
 err_reg1:
 	edma_free_slot(ecc, ecc->dummy_slot);
+err_disable_pm:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 	return ret;
 }
 
@@ -2542,6 +2543,8 @@ static int edma_remove(struct platform_device *pdev)
 	if (ecc->dma_memcpy)
 		dma_async_device_unregister(ecc->dma_memcpy);
 	edma_free_slot(ecc, ecc->dummy_slot);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 
 	return 0;
 }