Commit 2a4703c2 authored by Sebastian Reichel's avatar Sebastian Reichel Committed by Tomi Valkeinen

drm/omap: dsi: move panel refresh function to host

This moves the panel refresh/update function from the panel
driver into the DSI host driver to prepare for common drm_panel
support.
Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-30-tomi.valkeinen@ti.com
parent 66c6bf3a
......@@ -172,27 +172,6 @@ static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3)
return 0;
}
static int dsicm_set_update_window(struct panel_drv_data *ddata,
u16 x, u16 y, u16 w, u16 h)
{
struct mipi_dsi_device *dsi = ddata->dsi;
int r;
u16 x1 = x;
u16 x2 = x + w - 1;
u16 y1 = y;
u16 y2 = y + h - 1;
r = mipi_dsi_dcs_set_column_address(dsi, x1, x2);
if (r < 0)
return r;
r = mipi_dsi_dcs_set_page_address(dsi, y1, y2);
if (r < 0)
return r;
return 0;
}
static int dsicm_bl_update_status(struct backlight_device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
......@@ -466,48 +445,6 @@ static void dsicm_disable(struct omap_dss_device *dssdev)
mutex_unlock(&ddata->lock);
}
static void dsicm_framedone_cb(int err, void *data)
{
struct panel_drv_data *ddata = data;
dev_dbg(&ddata->dsi->dev, "framedone, err %d\n", err);
}
static int dsicm_update(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = ddata->src;
int r;
dev_dbg(&ddata->dsi->dev, "update %d, %d, %d x %d\n", x, y, w, h);
mutex_lock(&ddata->lock);
if (!ddata->enabled) {
r = 0;
goto err;
}
/* XXX no need to send this every frame, but dsi break if not done */
r = dsicm_set_update_window(ddata, 0, 0, ddata->vm.hactive,
ddata->vm.vactive);
if (r)
goto err;
r = src->ops->dsi.update(src, ddata->dsi->channel, dsicm_framedone_cb,
ddata);
if (r)
goto err;
mutex_unlock(&ddata->lock);
return 0;
err:
mutex_unlock(&ddata->lock);
return r;
}
static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
{
struct mipi_dsi_device *dsi = ddata->dsi;
......@@ -568,10 +505,6 @@ static const struct omap_dss_device_ops dsicm_ops = {
.check_timings = dsicm_check_timings,
};
static const struct omap_dss_driver dsicm_dss_driver = {
.update = dsicm_update,
};
static int dsicm_probe_of(struct mipi_dsi_device *dsi)
{
struct device_node *node = dsi->dev.of_node;
......@@ -652,7 +585,6 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
dssdev = &ddata->dssdev;
dssdev->dev = dev;
dssdev->ops = &dsicm_ops;
dssdev->driver = &dsicm_dss_driver;
dssdev->type = OMAP_DISPLAY_TYPE_DSI;
dssdev->display = true;
dssdev->owner = THIS_MODULE;
......
......@@ -214,6 +214,9 @@ static void dsi_display_uninit_dispc(struct dsi_data *dsi);
static int dsi_vc_send_null(struct dsi_data *dsi, int channel);
static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi,
const struct mipi_dsi_msg *msg);
/* DSI PLL HSDIV indices */
#define HSDIV_DISPC 0
#define HSDIV_DSI 1
......@@ -384,9 +387,6 @@ struct dsi_data {
struct delayed_work ulps_work;
void (*framedone_callback)(int, void *);
void *framedone_data;
struct delayed_work framedone_timeout_work;
#ifdef DSI_CATCH_MISSING_TE
......@@ -3804,8 +3804,6 @@ static void dsi_handle_framedone(struct dsi_data *dsi, int error)
dsi_set_ulps_auto(dsi, true);
dsi_bus_unlock(dsi);
dsi->framedone_callback(error, dsi->framedone_data);
if (!error)
dsi_perf_show(dsi, "DISPC");
}
......@@ -3837,6 +3835,8 @@ static void dsi_framedone_irq_callback(void *data)
cancel_delayed_work(&dsi->framedone_timeout_work);
DSSDBG("Framedone received!\n");
dsi_handle_framedone(dsi, 0);
}
......@@ -3853,17 +3853,69 @@ static int _dsi_update(struct dsi_data *dsi)
return 0;
}
static int dsi_update(struct omap_dss_device *dssdev, int channel,
void (*callback)(int, void *), void *data)
static int _dsi_update_window(struct dsi_data *dsi, int channel,
int x, int y, int w, int h)
{
int x1 = x, x2 = (x + w - 1);
int y1 = y, y2 = (y + h - 1);
u8 payloadX[5] = { MIPI_DCS_SET_COLUMN_ADDRESS,
x1 >> 8, x1 & 0xff, x2 >> 8, x2 & 0xff };
u8 payloadY[5] = { MIPI_DCS_SET_PAGE_ADDRESS,
y1 >> 8, y1 & 0xff, y2 >> 8, y2 & 0xff };
struct mipi_dsi_msg msgX = { 0 }, msgY = { 0 };
int ret;
WARN_ON(!dsi_bus_is_locked(dsi));
msgX.type = MIPI_DSI_DCS_LONG_WRITE;
msgX.channel = channel;
msgX.tx_buf = payloadX;
msgX.tx_len = sizeof(payloadX);
msgY.type = MIPI_DSI_DCS_LONG_WRITE;
msgY.channel = channel;
msgY.tx_buf = payloadY;
msgY.tx_len = sizeof(payloadY);
ret = _omap_dsi_host_transfer(dsi, &msgX);
if (ret != 0)
return ret;
return _omap_dsi_host_transfer(dsi, &msgY);
}
static int dsi_update_channel(struct omap_dss_device *dssdev, int channel)
{
struct dsi_data *dsi = to_dsi_data(dssdev);
int r;
if (channel > 3)
return -EINVAL;
dsi_bus_lock(dsi);
if (!dsi->vc[channel].dest) {
r = -ENODEV;
goto err;
}
if (dsi->vm.hactive == 0 || dsi->vm.vactive == 0) {
r = -EINVAL;
goto err;
}
DSSDBG("dsi_update_channel: %d", channel);
dsi_set_ulps_auto(dsi, false);
r = _dsi_update_window(dsi, channel, 0, 0, dsi->vm.hactive,
dsi->vm.vactive);
if (r < 0) {
DSSWARN("window update error: %d\n", r);
goto err;
}
dsi->update_channel = channel;
dsi->framedone_callback = callback;
dsi->framedone_data = data;
if (dsi->te_enabled && dsi->te_gpio) {
schedule_delayed_work(&dsi->te_timeout_work,
......@@ -3874,6 +3926,25 @@ static int dsi_update(struct omap_dss_device *dssdev, int channel,
}
return 0;
err:
dsi_set_ulps_auto(dsi, true);
dsi_bus_unlock(dsi);
return r;
}
static int dsi_update_all(struct omap_dss_device *dssdev)
{
unsigned int i;
int r;
for (i = 0; i < 4; i++) {
r = dsi_update_channel(dssdev, i);
if (r && r != -ENODEV)
return r;
}
return r;
}
/* Display funcs */
......@@ -4875,7 +4946,7 @@ static const struct omap_dss_device_ops dsi_ops = {
.enable_video_output = dsi_enable_video_output,
.disable_video_output = dsi_disable_video_output,
.update = dsi_update,
.update = dsi_update_all,
},
};
......
......@@ -284,13 +284,12 @@ struct omap_dss_writeback_info {
};
struct omapdss_dsi_ops {
/* bus configuration */
int (*update)(struct omap_dss_device *dssdev);
/* legacy API used by omapdss panels */
int (*set_config)(struct omap_dss_device *dssdev,
const struct omap_dss_dsi_config *cfg);
int (*update)(struct omap_dss_device *dssdev, int channel,
void (*callback)(int, void *), void *data);
int (*enable_video_output)(struct omap_dss_device *dssdev, int channel);
void (*disable_video_output)(struct omap_dss_device *dssdev,
int channel);
......@@ -354,7 +353,6 @@ struct omap_dss_device {
const char *name;
const struct omap_dss_driver *driver;
const struct omap_dss_device_ops *ops;
unsigned long ops_flags;
u32 bus_flags;
......@@ -375,11 +373,6 @@ struct omap_dss_device {
unsigned int of_port;
};
struct omap_dss_driver {
int (*update)(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h);
};
struct dss_device *omapdss_get_dss(void);
void omapdss_set_dss(struct dss_device *dss);
static inline bool omapdss_is_initialized(void)
......
......@@ -362,10 +362,8 @@ static void omap_crtc_manual_display_update(struct work_struct *data)
{
struct omap_crtc *omap_crtc =
container_of(data, struct omap_crtc, update_work.work);
struct drm_display_mode *mode = &omap_crtc->pipe->crtc->mode;
struct omap_dss_device *dssdev = omap_crtc->pipe->output->next;
struct omap_dss_device *dssdev = omap_crtc->pipe->output;
struct drm_device *dev = omap_crtc->base.dev;
const struct omap_dss_driver *dssdrv;
int ret;
if (!dssdev) {
......@@ -373,13 +371,12 @@ static void omap_crtc_manual_display_update(struct work_struct *data)
return;
}
dssdrv = dssdev->driver;
if (!dssdrv || !dssdrv->update) {
dev_err_once(dev->dev, "missing or incorrect dssdrv!");
if (dssdev->type != OMAP_DISPLAY_TYPE_DSI || !dssdev->ops->dsi.update) {
dev_err_once(dev->dev, "no DSI update callback found!");
return;
}
ret = dssdrv->update(dssdev, 0, 0, mode->hdisplay, mode->vdisplay);
ret = dssdev->ops->dsi.update(dssdev);
if (ret < 0) {
spin_lock_irq(&dev->event_lock);
omap_crtc->pending = false;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment