Commit 2a5fdc9a authored by Stephen Warren's avatar Stephen Warren

ARM: dt: tegra: invert status=disable vs status=okay

In tegra*.dtsi, set status="disable" for all HW modules that the board
design may choose not to use. Update all boards to specifically enable
any of those modules that are useful by setting status="okay".

This makes board files say which features they do use, rather than which
they don't, which feels more logical. It also makes the .dts files
slightly smaller, at least for existing content.
Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
Acked-by: default avatarOlof Johansson <olof@lixom.net>
parent 2eaab06e
......@@ -64,34 +64,22 @@ dap2_fs_pa2 {
};
serial@70006000 {
status = "okay";
clock-frequency = <408000000>;
};
serial@70006040 {
status = "disable";
};
serial@70006200 {
status = "disable";
};
serial@70006300 {
status = "disable";
};
serial@70006400 {
status = "disable";
};
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000c500 {
status = "okay";
clock-frequency = <100000>;
/* ALS and Proximity sensor */
......@@ -104,10 +92,12 @@ isl29028@44 {
};
i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
wm8903: wm8903@1a {
......@@ -139,38 +129,20 @@ tps62361 {
};
ahub {
i2s@70080300 {
status = "disable";
};
i2s@70080500 {
status = "disable";
};
i2s@70080600 {
status = "disable";
};
i2s@70080700 {
status = "disable";
i2s@70080400 {
status = "okay";
};
};
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
};
sdhci@78000200 {
status = "disable";
};
sdhci@78000400 {
status = "disable";
};
sdhci@78000600 {
status = "okay";
support-8bit;
};
......
......@@ -234,31 +234,17 @@ conf_ld17_0 {
};
};
i2s@70002a00 {
status = "disable";
};
serial@70006000 {
status = "disable";
};
serial@70006040 {
status = "disable";
};
serial@70006200 {
status = "disable";
i2s@70002800 {
status = "okay";
};
serial@70006300 {
status = "okay";
clock-frequency = <216000000>;
};
serial@70006400 {
status = "disable";
};
i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
wm8903: wm8903@1a {
......@@ -277,14 +263,17 @@ wm8903: wm8903@1a {
};
i2c@7000c400 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
};
......@@ -292,25 +281,28 @@ pmc {
nvidia,invert-interrupt;
};
usb@c5000000 {
status = "okay";
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000000 {
status = "disable";
usb@c5008000 {
status = "okay";
};
sdhci@c8000200 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
};
sdhci@c8000400 {
status = "disable";
};
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
......
......@@ -226,31 +226,22 @@ conf_ld17_0 {
};
};
i2s@70002a00 {
status = "disable";
i2s@70002800 {
status = "okay";
};
serial@70006000 {
status = "okay";
clock-frequency = <216000000>;
};
serial@70006040 {
status = "disable";
};
serial@70006200 {
status = "okay";
clock-frequency = <216000000>;
};
serial@70006300 {
status = "disable";
};
serial@70006400 {
status = "disable";
};
i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
alc5632: alc5632@1e {
......@@ -262,13 +253,10 @@ alc5632: alc5632@1e {
};
i2c@7000c400 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000c500 {
status = "disable";
};
nvec {
compatible = "nvidia,nvec";
reg = <0x7000c500 0x100>;
......@@ -281,6 +269,7 @@ nvec {
};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
adt7461@4c {
......@@ -289,25 +278,28 @@ adt7461@4c {
};
};
usb@c5000000 {
status = "okay";
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
};
usb@c5008000 {
status = "okay";
};
sdhci@c8000000 {
status = "okay";
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000200 {
status = "disable";
};
sdhci@c8000400 {
status = "disable";
};
sdhci@c8000600 {
status = "okay";
support-8bit;
};
......
......@@ -257,31 +257,17 @@ drive_sdio1 {
};
};
i2s@70002a00 {
status = "disable";
};
serial@70006000 {
status = "disable";
};
serial@70006040 {
status = "disable";
};
serial@70006200 {
status = "disable";
i2s@70002800 {
status = "okay";
};
serial@70006300 {
status = "okay";
clock-frequency = <216000000>;
};
serial@70006400 {
status = "disable";
};
i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
wm8903: wm8903@1a {
......@@ -315,6 +301,7 @@ gyrometer@68 {
};
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
smart-battery@b {
......@@ -326,10 +313,12 @@ smart-battery@b {
};
i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
temperature-sensor@4c {
......@@ -384,29 +373,29 @@ emc-table@380000 {
};
usb@c5000000 {
status = "okay";
nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
dr_mode = "otg";
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000000 {
status = "disable";
};
sdhci@c8000200 {
status = "disable";
usb@c5008000 {
status = "okay";
};
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
sdhci@c8000600 {
status = "okay";
support-8bit;
};
......
......@@ -240,39 +240,27 @@ conf_ld17_0 {
};
};
i2s@70002a00 {
status = "disable";
i2s@70002800 {
status = "okay";
};
serial@70006000 {
status = "okay";
clock-frequency = <216000000>;
};
serial@70006040 {
status = "disable";
};
serial@70006200 {
status = "disable";
};
serial@70006300 {
status = "disable";
};
serial@70006400 {
status = "disable";
};
i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000c400 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
codec: codec@1a {
......@@ -286,23 +274,24 @@ rtc@56 {
};
};
i2c@7000d000 {
status = "disable";
usb@c5000000 {
status = "okay";
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
};
sdhci@c8000200 {
status = "disable";
usb@c5008000 {
status = "okay";
};
sdhci@c8000400 {
status = "disable";
sdhci@c8000000 {
status = "okay";
};
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio 121 0>; /* gpio PP1 */
wp-gpios = <&gpio 122 0>; /* gpio PP2 */
};
......
......@@ -240,31 +240,17 @@ conf_ld17_0 {
};
};
i2s@70002a00 {
status = "disable";
};
serial@70006000 {
status = "disable";
};
serial@70006040 {
status = "disable";
};
serial@70006200 {
status = "disable";
i2s@70002800 {
status = "okay";
};
serial@70006300 {
status = "okay";
clock-frequency = <216000000>;
};
serial@70006400 {
status = "disable";
};
i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
wm8903: wm8903@1a {
......@@ -291,36 +277,42 @@ isl29018@44 {
};
i2c@7000c400 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
usb@c5000000 {
status = "okay";
};
sdhci@c8000000 {
status = "disable";
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000200 {
status = "disable";
usb@c5008000 {
status = "okay";
};
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
sdhci@c8000600 {
status = "okay";
support-8bit;
};
......
......@@ -72,6 +72,7 @@ tegra_i2s1: i2s@70002800 {
reg = <0x70002800 0x200>;
interrupts = <0 13 0x04>;
nvidia,dma-request-selector = <&apbdma 2>;
status = "disable";
};
tegra_i2s2: i2s@70002a00 {
......@@ -79,6 +80,7 @@ tegra_i2s2: i2s@70002a00 {
reg = <0x70002a00 0x200>;
interrupts = <0 3 0x04>;
nvidia,dma-request-selector = <&apbdma 1>;
status = "disable";
};
serial@70006000 {
......@@ -86,6 +88,7 @@ serial@70006000 {
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
status = "disable";
};
serial@70006040 {
......@@ -93,6 +96,7 @@ serial@70006040 {
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
status = "disable";
};
serial@70006200 {
......@@ -100,6 +104,7 @@ serial@70006200 {
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
status = "disable";
};
serial@70006300 {
......@@ -107,6 +112,7 @@ serial@70006300 {
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
status = "disable";
};
serial@70006400 {
......@@ -114,6 +120,7 @@ serial@70006400 {
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
status = "disable";
};
i2c@7000c000 {
......@@ -122,6 +129,7 @@ i2c@7000c000 {
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
status = "disable";
};
i2c@7000c400 {
......@@ -130,6 +138,7 @@ i2c@7000c400 {
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
status = "disable";
};
i2c@7000c500 {
......@@ -138,6 +147,7 @@ i2c@7000c500 {
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
status = "disable";
};
i2c@7000d000 {
......@@ -146,6 +156,7 @@ i2c@7000d000 {
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
status = "disable";
};
pmc {
......@@ -179,6 +190,7 @@ usb@c5000000 {
interrupts = <0 20 0x04>;
phy_type = "utmi";
nvidia,has-legacy-mode;
status = "disable";
};
usb@c5004000 {
......@@ -186,6 +198,7 @@ usb@c5004000 {
reg = <0xc5004000 0x4000>;
interrupts = <0 21 0x04>;
phy_type = "ulpi";
status = "disable";
};
usb@c5008000 {
......@@ -193,30 +206,35 @@ usb@c5008000 {
reg = <0xc5008000 0x4000>;
interrupts = <0 97 0x04>;
phy_type = "utmi";
status = "disable";
};
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
interrupts = <0 14 0x04>;
status = "disable";
};
sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
interrupts = <0 15 0x04>;
status = "disable";
};
sdhci@c8000400 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
interrupts = <0 19 0x04>;
status = "disable";
};
sdhci@c8000600 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
interrupts = <0 31 0x04>;
status = "disable";
};
pmu {
......
......@@ -82,6 +82,7 @@ serial@70006000 {
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
status = "disable";
};
serial@70006040 {
......@@ -89,6 +90,7 @@ serial@70006040 {
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
status = "disable";
};
serial@70006200 {
......@@ -96,6 +98,7 @@ serial@70006200 {
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
status = "disable";
};
serial@70006300 {
......@@ -103,6 +106,7 @@ serial@70006300 {
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
status = "disable";
};
serial@70006400 {
......@@ -110,6 +114,7 @@ serial@70006400 {
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <0 91 0x04>;
status = "disable";
};
i2c@7000c000 {
......@@ -118,6 +123,7 @@ i2c@7000c000 {
interrupts = <0 38 0x04>;
#address-cells = <1>;
#size-cells = <0>;
status = "disable";
};
i2c@7000c400 {
......@@ -126,6 +132,7 @@ i2c@7000c400 {
interrupts = <0 84 0x04>;
#address-cells = <1>;
#size-cells = <0>;
status = "disable";
};
i2c@7000c500 {
......@@ -134,6 +141,7 @@ i2c@7000c500 {
interrupts = <0 92 0x04>;
#address-cells = <1>;
#size-cells = <0>;
status = "disable";
};
i2c@7000c700 {
......@@ -142,6 +150,7 @@ i2c@7000c700 {
interrupts = <0 120 0x04>;
#address-cells = <1>;
#size-cells = <0>;
status = "disable";
};
i2c@7000d000 {
......@@ -150,6 +159,7 @@ i2c@7000d000 {
interrupts = <0 53 0x04>;
#address-cells = <1>;
#size-cells = <0>;
status = "disable";
};
pmc {
......@@ -191,30 +201,35 @@ tegra_i2s0: i2s@70080300 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
status = "disable";
};
tegra_i2s1: i2s@70080400 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
status = "disable";
};
tegra_i2s2: i2s@70080500 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
status = "disable";
};
tegra_i2s3: i2s@70080600 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
status = "disable";
};
tegra_i2s4: i2s@70080700 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
status = "disable";
};
};
......@@ -222,24 +237,28 @@ sdhci@78000000 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000000 0x200>;
interrupts = <0 14 0x04>;
status = "disable";
};
sdhci@78000200 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000200 0x200>;
interrupts = <0 15 0x04>;
status = "disable";
};
sdhci@78000400 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000400 0x200>;
interrupts = <0 19 0x04>;
status = "disable";
};
sdhci@78000600 {
compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
reg = <0x78000600 0x200>;
interrupts = <0 31 0x04>;
status = "disable";
};
pmu {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment