Commit 2a613e41 authored by Wouter Van Rooy's avatar Wouter Van Rooy Committed by Greg Kroah-Hartman

Staging: cx25821 fixed C99 comments, white spaces and unnecessary braces

This patch fixes some C99 style comments, trailing white spaces and some
unnecessary 'if' braces found by checkpatch.pl
Signed-off-by: default avatarWouter Van Rooy <wouter.vanrooy@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 0686e4f4
......@@ -42,10 +42,10 @@
#define AUDIO_SRAM_CHANNEL SRAM_CH08
#define dprintk(level,fmt, arg...) if (debug >= level) \
#define dprintk(level, fmt, arg...) if (debug >= level) \
printk(KERN_INFO "%s/1: " fmt, chip->dev->name , ## arg)
#define dprintk_core(level,fmt, arg...) if (debug >= level) \
#define dprintk_core(level, fmt, arg...) if (debug >= level) \
printk(KERN_DEBUG "%s/1: " fmt, chip->dev->name , ## arg)
/****************************************************************************
......@@ -105,7 +105,7 @@ MODULE_PARM_DESC(index, "Index value for cx25821 capture interface(s).");
MODULE_DESCRIPTION("ALSA driver module for cx25821 based capture cards");
MODULE_AUTHOR("Hiep Huynh");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Conexant,25821}"); //"{{Conexant,23881},"
MODULE_SUPPORTED_DEVICE("{{Conexant,25821}"); /*"{{Conexant,23881},"*/
static unsigned int debug;
module_param(debug, int, 0644);
......@@ -135,7 +135,7 @@ MODULE_PARM_DESC(debug, "enable debug messages");
* BOARD Specific: Sets audio DMA
*/
static int _cx25821_start_audio_dma(snd_cx25821_card_t * chip)
static int _cx25821_start_audio_dma(snd_cx25821_card_t *chip)
{
struct cx25821_buffer *buf = chip->buf;
struct cx25821_dev *dev = chip->dev;
......@@ -143,7 +143,7 @@ static int _cx25821_start_audio_dma(snd_cx25821_card_t * chip)
&cx25821_sram_channels[AUDIO_SRAM_CHANNEL];
u32 tmp = 0;
// enable output on the GPIO 0 for the MCLK ADC (Audio)
/* enable output on the GPIO 0 for the MCLK ADC (Audio) */
cx25821_set_gpiopin_direction(chip->dev, 0, 0);
/* Make sure RISC/FIFO are off before changing FIFO/RISC settings */
......@@ -158,18 +158,22 @@ static int _cx25821_start_audio_dma(snd_cx25821_card_t * chip)
cx_write(AUD_A_LNGTH, buf->bpl);
/* reset counter */
cx_write(AUD_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET); //GP_COUNT_CONTROL_RESET = 0x3
cx_write(AUD_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
/* GP_COUNT_CONTROL_RESET = 0x3 */
atomic_set(&chip->count, 0);
//Set the input mode to 16-bit
/* Set the input mode to 16-bit */
tmp = cx_read(AUD_A_CFG);
cx_write(AUD_A_CFG,
tmp | FLD_AUD_DST_PK_MODE | FLD_AUD_DST_ENABLE |
FLD_AUD_CLK_ENABLE);
//printk(KERN_INFO "DEBUG: Start audio DMA, %d B/line, cmds_start(0x%x)= %d lines/FIFO, %d periods, %d "
// "byte buffer\n", buf->bpl, audio_ch->cmds_start, cx_read(audio_ch->cmds_start + 12)>>1,
// chip->num_periods, buf->bpl * chip->num_periods);
/*printk(KERN_INFO "DEBUG: Start audio DMA, %d B/line, "
"cmds_start(0x%x)= %d lines/FIFO, %d periods, %d "
"byte buffer\n", buf->bpl, audio_ch->cmds_start, "
"cx_read(audio_ch->cmds_start + 12)>>1,
chip->num_periods, buf->bpl * chip->num_periods);*/
/* Enables corresponding bits at AUD_INT_STAT */
cx_write(AUD_A_INT_MSK,
......@@ -182,7 +186,7 @@ static int _cx25821_start_audio_dma(snd_cx25821_card_t * chip)
/* enable audio irqs */
cx_set(PCI_INT_MSK, chip->dev->pci_irqmask | PCI_MSK_AUD_INT);
// Turn on audio downstream fifo and risc enable 0x101
/* Turn on audio downstream fifo and risc enable 0x101 */
tmp = cx_read(AUD_INT_DMA_CTL);
cx_set(AUD_INT_DMA_CTL,
tmp | (FLD_AUD_DST_A_RISC_EN | FLD_AUD_DST_A_FIFO_EN));
......@@ -194,7 +198,7 @@ static int _cx25821_start_audio_dma(snd_cx25821_card_t * chip)
/*
* BOARD Specific: Resets audio DMA
*/
static int _cx25821_stop_audio_dma(snd_cx25821_card_t * chip)
static int _cx25821_stop_audio_dma(snd_cx25821_card_t *chip)
{
struct cx25821_dev *dev = chip->dev;
......@@ -232,13 +236,12 @@ static char *cx25821_aud_irqs[32] = {
/*
* BOARD Specific: Threats IRQ audio specific calls
*/
static void cx25821_aud_irq(snd_cx25821_card_t * chip, u32 status, u32 mask)
static void cx25821_aud_irq(snd_cx25821_card_t *chip, u32 status, u32 mask)
{
struct cx25821_dev *dev = chip->dev;
if (0 == (status & mask)) {
if (0 == (status & mask))
return;
}
cx_write(AUD_A_INT_STAT, status);
if (debug > 1 || (status & mask & ~0xff))
......@@ -318,11 +321,11 @@ static irqreturn_t cx25821_irq(int irq, void *dev_id)
if (handled)
cx_write(PCI_INT_STAT, pci_status);
out:
out:
return IRQ_RETVAL(handled);
}
static int dsp_buffer_free(snd_cx25821_card_t * chip)
static int dsp_buffer_free(snd_cx25821_card_t *chip)
{
BUG_ON(!chip->dma_size);
......@@ -363,7 +366,8 @@ static struct snd_pcm_hardware snd_cx25821_digital_hw = {
.period_bytes_max = DEFAULT_FIFO_SIZE / 3,
.periods_min = 1,
.periods_max = AUDIO_LINE_SIZE,
.buffer_bytes_max = (AUDIO_LINE_SIZE * AUDIO_LINE_SIZE), //128*128 = 16384 = 1024 * 16
.buffer_bytes_max = (AUDIO_LINE_SIZE * AUDIO_LINE_SIZE),
/* 128*128 = 16384 = 1024 * 16 */
};
/*
......@@ -393,18 +397,20 @@ static int snd_cx25821_pcm_open(struct snd_pcm_substream *substream)
if (cx25821_sram_channels[AUDIO_SRAM_CHANNEL].fifo_size !=
DEFAULT_FIFO_SIZE) {
bpl = cx25821_sram_channels[AUDIO_SRAM_CHANNEL].fifo_size / 3; //since there are 3 audio Clusters
/* since there are 3 audio Clusters */
bpl = cx25821_sram_channels[AUDIO_SRAM_CHANNEL].fifo_size / 3;
bpl &= ~7; /* must be multiple of 8 */
if (bpl > AUDIO_LINE_SIZE) {
if (bpl > AUDIO_LINE_SIZE)
bpl = AUDIO_LINE_SIZE;
}
runtime->hw.period_bytes_min = bpl;
runtime->hw.period_bytes_max = bpl;
}
return 0;
_error:
_error:
dprintk(1, "Error opening PCM!\n");
return err;
}
......@@ -445,9 +451,9 @@ static int snd_cx25821_hw_params(struct snd_pcm_substream *substream,
if (NULL == buf)
return -ENOMEM;
if (chip->period_size > AUDIO_LINE_SIZE) {
if (chip->period_size > AUDIO_LINE_SIZE)
chip->period_size = AUDIO_LINE_SIZE;
}
buf->vb.memory = V4L2_MEMORY_MMAP;
buf->vb.field = V4L2_FIELD_NONE;
......@@ -474,7 +480,7 @@ static int snd_cx25821_hw_params(struct snd_pcm_substream *substream,
buf->vb.width, buf->vb.height, 1);
if (ret < 0) {
printk(KERN_INFO
"DEBUG: ERROR after cx25821_risc_databuffer_audio() \n");
"DEBUG: ERROR after cx25821_risc_databuffer_audio()\n");
goto error;
}
......@@ -494,7 +500,7 @@ static int snd_cx25821_hw_params(struct snd_pcm_substream *substream,
return 0;
error:
error:
kfree(buf);
return ret;
}
......@@ -593,10 +599,10 @@ static struct snd_pcm_ops snd_cx25821_pcm_ops = {
};
/*
* ALSA create a PCM device: Called when initializing the board. Sets up the name and hooks up
* the callbacks
* ALSA create a PCM device: Called when initializing the board.
* Sets up the name and hooks up the callbacks
*/
static int snd_cx25821_pcm(snd_cx25821_card_t * chip, int device, char *name)
static int snd_cx25821_pcm(snd_cx25821_card_t *chip, int device, char *name)
{
struct snd_pcm *pcm;
int err;
......@@ -655,7 +661,7 @@ static void snd_cx25821_dev_free(struct snd_card *card)
{
snd_cx25821_card_t *chip = card->private_data;
//snd_cx25821_free(chip);
/*snd_cx25821_free(chip);*/
snd_card_free(chip->card);
}
......@@ -671,13 +677,13 @@ static int cx25821_audio_initdev(struct cx25821_dev *dev)
if (devno >= SNDRV_CARDS) {
printk(KERN_INFO "DEBUG ERROR: devno >= SNDRV_CARDS %s\n",
__func__);
return (-ENODEV);
return -ENODEV;
}
if (!enable[devno]) {
++devno;
printk(KERN_INFO "DEBUG ERROR: !enable[devno] %s\n", __func__);
return (-ENOENT);
return -ENOENT;
}
err = snd_card_create(index[devno], id[devno], THIS_MODULE,
......@@ -741,7 +747,7 @@ static int cx25821_audio_initdev(struct cx25821_dev *dev)
devno++;
return 0;
error:
error:
snd_card_free(card);
return err;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment