Commit 2a6eadbd authored by Alan Cox's avatar Alan Cox Committed by Linus Torvalds

tty: Rework istallion to use the tty port changes

Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 36c621d8
......@@ -626,8 +626,6 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp);
static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp);
static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp,
struct stliport *portp, struct file *filp);
static int stli_setport(struct tty_struct *tty);
static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
......@@ -787,6 +785,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
{
struct stlibrd *brdp;
struct stliport *portp;
struct tty_port *port;
unsigned int minordev, brdnr, portnr;
int rc;
......@@ -808,30 +807,19 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
return -ENODEV;
if (portp->devnr < 1)
return -ENODEV;
/*
* Check if this port is in the middle of closing. If so then wait
* until it is closed then return error status based on flag settings.
* The sleep here does not need interrupt protection since the wakeup
* for it is done with the same context.
*/
if (portp->port.flags & ASYNC_CLOSING) {
interruptible_sleep_on(&portp->port.close_wait);
if (portp->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
return -ERESTARTSYS;
}
port = &portp->port;
/*
* On the first open of the device setup the port hardware, and
* initialize the per port data structure. Since initializing the port
* requires several commands to the board we will need to wait for any
* other open that is already initializing the port.
*
* Review - locking
*/
tty_port_tty_set(&portp->port, tty);
tty_port_tty_set(port, tty);
tty->driver_data = portp;
portp->port.count++;
port->count++;
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_INITIALIZING, &portp->state));
......@@ -841,7 +829,8 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
set_bit(ST_INITIALIZING, &portp->state);
if ((rc = stli_initopen(tty, brdp, portp)) >= 0) {
portp->port.flags |= ASYNC_INITIALIZED;
/* Locking */
port->flags |= ASYNC_INITIALIZED;
clear_bit(TTY_IO_ERROR, &tty->flags);
}
clear_bit(ST_INITIALIZING, &portp->state);
......@@ -849,31 +838,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
if (rc < 0)
return rc;
}
/*
* Check if this port is in the middle of closing. If so then wait
* until it is closed then return error status, based on flag settings.
* The sleep here does not need interrupt protection since the wakeup
* for it is done with the same context.
*/
if (portp->port.flags & ASYNC_CLOSING) {
interruptible_sleep_on(&portp->port.close_wait);
if (portp->port.flags & ASYNC_HUP_NOTIFY)
return -EAGAIN;
return -ERESTARTSYS;
}
/*
* Based on type of open being done check if it can overlap with any
* previous opens still in effect. If we are a normal serial device
* then also we might have to wait for carrier.
*/
if (!(filp->f_flags & O_NONBLOCK)) {
if ((rc = stli_waitcarrier(tty, brdp, portp, filp)) != 0)
return rc;
}
portp->port.flags |= ASYNC_NORMAL_ACTIVE;
return 0;
return tty_port_block_til_ready(&portp->port, tty, filp);
}
/*****************************************************************************/
......@@ -882,25 +847,29 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
{
struct stlibrd *brdp;
struct stliport *portp;
struct tty_port *port;
unsigned long flags;
portp = tty->driver_data;
if (portp == NULL)
return;
port = &portp->port;
spin_lock_irqsave(&stli_lock, flags);
spin_lock_irqsave(&port->lock, flags);
if (tty_hung_up_p(filp)) {
spin_unlock_irqrestore(&stli_lock, flags);
spin_unlock_irqrestore(&port->lock, flags);
return;
}
if ((tty->count == 1) && (portp->port.count != 1))
portp->port.count = 1;
if (portp->port.count-- > 1) {
spin_unlock_irqrestore(&stli_lock, flags);
if (tty->count == 1 && port->count != 1)
port->count = 1;
if (port->count-- > 1) {
spin_unlock_irqrestore(&port->lock, flags);
return;
}
portp->port.flags |= ASYNC_CLOSING;
port->flags |= ASYNC_CLOSING;
tty->closing = 1;
spin_unlock_irqrestore(&port->lock, flags);
/*
* May want to wait for data to drain before closing. The BUSY flag
......@@ -908,15 +877,17 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
* updated by messages from the slave - indicating when all chars
* really have drained.
*/
spin_lock_irqsave(&stli_lock, flags);
if (tty == stli_txcooktty)
stli_flushchars(tty);
tty->closing = 1;
spin_unlock_irqrestore(&stli_lock, flags);
if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, portp->closing_wait);
portp->port.flags &= ~ASYNC_INITIALIZED;
/* FIXME: port locking here needs attending to */
port->flags &= ~ASYNC_INITIALIZED;
brdp = stli_brds[portp->brdnr];
stli_rawclose(brdp, portp, 0, 0);
if (tty->termios->c_cflag & HUPCL) {
......@@ -937,14 +908,14 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
tty->closing = 0;
tty_port_tty_set(&portp->port, NULL);
if (portp->openwaitcnt) {
if (port->blocked_open) {
if (portp->close_delay)
msleep_interruptible(jiffies_to_msecs(portp->close_delay));
wake_up_interruptible(&portp->port.open_wait);
wake_up_interruptible(&port->open_wait);
}
portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&portp->port.close_wait);
port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&port->close_wait);
}
/*****************************************************************************/
......@@ -1189,63 +1160,17 @@ static int stli_carrier_raised(struct tty_port *port)
return (portp->sigs & TIOCM_CD) ? 1 : 0;
}
/*
* Possibly need to wait for carrier (DCD signal) to come high. Say
* maybe because if we are clocal then we don't need to wait...
*/
static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp,
struct stliport *portp, struct file *filp)
static void stli_raise_dtr_rts(struct tty_port *port)
{
unsigned long flags;
int rc, doclocal;
struct tty_port *port = &portp->port;
rc = 0;
doclocal = 0;
if (tty->termios->c_cflag & CLOCAL)
doclocal++;
spin_lock_irqsave(&stli_lock, flags);
portp->openwaitcnt++;
if (! tty_hung_up_p(filp))
port->count--;
spin_unlock_irqrestore(&stli_lock, flags);
for (;;) {
stli_mkasysigs(&portp->asig, 1, 1);
if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS,
&portp->asig, sizeof(asysigs_t), 0)) < 0)
break;
if (tty_hung_up_p(filp) ||
((port->flags & ASYNC_INITIALIZED) == 0)) {
if (port->flags & ASYNC_HUP_NOTIFY)
rc = -EBUSY;
else
rc = -ERESTARTSYS;
break;
}
if (((port->flags & ASYNC_CLOSING) == 0) &&
(doclocal || tty_port_carrier_raised(port))) {
break;
}
if (signal_pending(current)) {
rc = -ERESTARTSYS;
break;
}
interruptible_sleep_on(&port->open_wait);
}
spin_lock_irqsave(&stli_lock, flags);
if (! tty_hung_up_p(filp))
port->count++;
portp->openwaitcnt--;
spin_unlock_irqrestore(&stli_lock, flags);
return rc;
struct stliport *portp = container_of(port, struct stliport, port);
struct stlibrd *brdp = stli_brds[portp->brdnr];
stli_mkasysigs(&portp->asig, 1, 1);
if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
sizeof(asysigs_t), 0) < 0)
printk(KERN_WARNING "istallion: dtr raise failed.\n");
}
/*****************************************************************************/
/*
......@@ -1828,6 +1753,7 @@ static void stli_hangup(struct tty_struct *tty)
{
struct stliport *portp;
struct stlibrd *brdp;
struct tty_port *port;
unsigned long flags;
portp = tty->driver_data;
......@@ -1838,8 +1764,11 @@ static void stli_hangup(struct tty_struct *tty)
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
return;
port = &portp->port;
portp->port.flags &= ~ASYNC_INITIALIZED;
spin_lock_irqsave(&port->lock, flags);
port->flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&port->lock, flags);
if (!test_bit(ST_CLOSING, &portp->state))
stli_rawclose(brdp, portp, 0, 0);
......@@ -1860,12 +1789,9 @@ static void stli_hangup(struct tty_struct *tty)
clear_bit(ST_TXBUSY, &portp->state);
clear_bit(ST_RXSTOP, &portp->state);
set_bit(TTY_IO_ERROR, &tty->flags);
tty_port_tty_set(&portp->port, NULL);
portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
portp->port.count = 0;
spin_unlock_irqrestore(&stli_lock, flags);
wake_up_interruptible(&portp->port.open_wait);
tty_port_hangup(port);
}
/*****************************************************************************/
......@@ -4528,6 +4454,7 @@ static const struct tty_operations stli_ops = {
static const struct tty_port_operations stli_port_ops = {
.carrier_raised = stli_carrier_raised,
.raise_dtr_rts = stli_raise_dtr_rts,
};
/*****************************************************************************/
......
......@@ -61,7 +61,6 @@ struct stliport {
int custom_divisor;
int close_delay;
int closing_wait;
int openwaitcnt;
int rc;
int argsize;
void *argp;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment