Bluetooth: hci_bcm: Add broken-irq dmi blacklist and add Meegopad T08 to it

The Meegopad T08 hdmi-stick (think Intel computestick) has a brcm43430
wifi/bt combo chip. The BCM2E90 ACPI device describing the BT part does
contain a valid ActiveLow GpioInt entry, but the GPIO it points to never
goes low, so either the IRQ pin is not connected, or the ACPI resource-
table points to the wrong GPIO.

Eitherway things will not work if we try to use the specified IRQ, this
commits adds a DMI based broken-irq blacklist and disables use of the IRQ
and thus also runtime-pm for devices on this list.

This blacklist starts with the the Meegopad T08, fixing bluetooth not
working on this hdmi-stick. Since this is not a battery powered device
the loss of runtime-pm is not really an issue.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/hci_bcm.c

@@ -794,6 +794,20 @@ static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = {
 	{ },
 };
 
+/* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */
+static const struct dmi_system_id bcm_broken_irq_dmi_table[] = {
+	{
+		.ident = "Meegopad T08",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR,
+					"To be filled by OEM."),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+			DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.1"),
+		},
+	},
+	{ }
+};
+
 #ifdef CONFIG_ACPI
 /* IRQ polarity of some chipsets are not defined correctly in ACPI table. */
 static const struct dmi_system_id bcm_active_low_irq_dmi_table[] = {
@@ -904,6 +918,8 @@ static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered)
 
 static int bcm_get_resources(struct bcm_device *dev)
 {
+	const struct dmi_system_id *dmi_id;
+
 	dev->name = dev_name(dev->dev);
 
 	if (x86_apple_machine && !bcm_apple_get_resources(dev))
@@ -936,6 +952,13 @@ static int bcm_get_resources(struct bcm_device *dev)
 		dev->irq = gpiod_to_irq(gpio);
 	}
 
+	dmi_id = dmi_first_match(bcm_broken_irq_dmi_table);
+	if (dmi_id) {
+		dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n",
+			 dmi_id->ident);
+		dev->irq = 0;
+	}
+
 	dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq);
 	return 0;
 }