Commit 2b13c3ae authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: bcmgenet: Drop legacy MDIO code

Now that we have fully migrated to the mdio-bcm-unimac driver, drop the
legacy MDIO bus code which did duplicate a fair amount of code.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9a4e7969
...@@ -28,59 +28,6 @@ ...@@ -28,59 +28,6 @@
#include "bcmgenet.h" #include "bcmgenet.h"
/* read a value from the MII */
static int bcmgenet_mii_read(struct mii_bus *bus, int phy_id, int location)
{
int ret;
struct net_device *dev = bus->priv;
struct bcmgenet_priv *priv = netdev_priv(dev);
u32 reg;
bcmgenet_umac_writel(priv, (MDIO_RD | (phy_id << MDIO_PMD_SHIFT) |
(location << MDIO_REG_SHIFT)), UMAC_MDIO_CMD);
/* Start MDIO transaction*/
reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
reg |= MDIO_START_BUSY;
bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD);
wait_event_timeout(priv->wq,
!(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD)
& MDIO_START_BUSY),
HZ / 100);
ret = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
/* Some broken devices are known not to release the line during
* turn-around, e.g: Broadcom BCM53125 external switches, so check for
* that condition here and ignore the MDIO controller read failure
* indication.
*/
if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (ret & MDIO_READ_FAIL))
return -EIO;
return ret & 0xffff;
}
/* write a value to the MII */
static int bcmgenet_mii_write(struct mii_bus *bus, int phy_id,
int location, u16 val)
{
struct net_device *dev = bus->priv;
struct bcmgenet_priv *priv = netdev_priv(dev);
u32 reg;
bcmgenet_umac_writel(priv, (MDIO_WR | (phy_id << MDIO_PMD_SHIFT) |
(location << MDIO_REG_SHIFT) | (0xffff & val)),
UMAC_MDIO_CMD);
reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD);
reg |= MDIO_START_BUSY;
bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD);
wait_event_timeout(priv->wq,
!(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) &
MDIO_START_BUSY),
HZ / 100);
return 0;
}
/* setup netdev link state when PHY link status change and /* setup netdev link state when PHY link status change and
* update UMAC and RGMII block when link up * update UMAC and RGMII block when link up
*/ */
...@@ -393,78 +340,6 @@ int bcmgenet_mii_probe(struct net_device *dev) ...@@ -393,78 +340,6 @@ int bcmgenet_mii_probe(struct net_device *dev)
return 0; return 0;
} }
/* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with
* their internal MDIO management controller making them fail to successfully
* be read from or written to for the first transaction. We insert a dummy
* BMSR read here to make sure that phy_get_device() and get_phy_id() can
* correctly read the PHY MII_PHYSID1/2 registers and successfully register a
* PHY device for this peripheral.
*
* Once the PHY driver is registered, we can workaround subsequent reads from
* there (e.g: during system-wide power management).
*
* bus->reset is invoked before mdiobus_scan during mdiobus_register and is
* therefore the right location to stick that workaround. Since we do not want
* to read from non-existing PHYs, we either use bus->phy_mask or do a manual
* Device Tree scan to limit the search area.
*/
static int bcmgenet_mii_bus_reset(struct mii_bus *bus)
{
struct net_device *dev = bus->priv;
struct bcmgenet_priv *priv = netdev_priv(dev);
struct device_node *np = priv->mdio_dn;
struct device_node *child = NULL;
u32 read_mask = 0;
int addr = 0;
if (!np) {
read_mask = 1 << priv->phy_addr;
} else {
for_each_available_child_of_node(np, child) {
addr = of_mdio_parse_addr(&dev->dev, child);
if (addr < 0)
continue;
read_mask |= 1 << addr;
}
}
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
if (read_mask & 1 << addr) {
dev_dbg(&dev->dev, "Workaround for PHY @ %d\n", addr);
mdiobus_read(bus, addr, MII_BMSR);
}
}
return 0;
}
static int bcmgenet_mii_alloc(struct bcmgenet_priv *priv)
{
struct mii_bus *bus;
if (priv->mii_bus)
return 0;
priv->mii_bus = mdiobus_alloc();
if (!priv->mii_bus) {
pr_err("failed to allocate\n");
return -ENOMEM;
}
bus = priv->mii_bus;
bus->priv = priv->dev;
bus->name = "bcmgenet MII bus";
bus->parent = &priv->pdev->dev;
bus->read = bcmgenet_mii_read;
bus->write = bcmgenet_mii_write;
bus->reset = bcmgenet_mii_bus_reset;
snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d",
priv->pdev->name, priv->pdev->id);
return 0;
}
static struct device_node *bcmgenet_mii_of_find_mdio(struct bcmgenet_priv *priv) static struct device_node *bcmgenet_mii_of_find_mdio(struct bcmgenet_priv *priv)
{ {
struct device_node *dn = priv->pdev->dev.of_node; struct device_node *dn = priv->pdev->dev.of_node;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment