Commit 2b637da5 authored by Lee Revell's avatar Lee Revell Committed by Jaroslav Kysela

[ALSA] clean up card features

EMU10K1/EMU10K2 driver
This patch converts the emu10k1 driver to use the card capabilities
structure for some more things.

Not extensively tested but seems to work.
Signed-off-by: default avatarLee Revell <rlrevell@joe-job.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 51f633da
......@@ -1046,6 +1046,7 @@ typedef struct {
unsigned char ca0108_chip; /* Audigy 2 Value */
unsigned char ca0151_chip; /* P16V */
unsigned char spk71; /* Has 7.1 speakers */
unsigned char sblive51; /* SBLive! 5.1 - extout 0x11 -> center, 0x12 -> lfe */
unsigned char spdif_bug; /* Has Spdif phasing bug */
unsigned char ac97_chip; /* Has an AC97 chip */
unsigned char ecard; /* APS EEPROM */
......@@ -1057,11 +1058,8 @@ struct _snd_emu10k1 {
int irq;
unsigned long port; /* I/O port number */
unsigned int APS: 1, /* APS flag */
no_ac97: 1, /* no AC'97 */
tos_link: 1, /* tos link detected */
rear_ac97: 1, /* rear channels are on AC'97 */
spk71:1; /* 7.1 configuration (Audigy 2 ZS) */
unsigned int tos_link: 1, /* tos link detected */
rear_ac97: 1; /* rear channels are on AC'97 */
const emu_chip_details_t *card_capabilities; /* Contains profile of card capabilities */
unsigned int audigy; /* is Audigy? */
unsigned int revision; /* chip revision */
......@@ -1456,7 +1454,6 @@ int snd_emu10k1_fx8010_unregister_irq_handler(emu10k1_t *emu,
#endif
typedef struct {
unsigned int card; /* card type */
unsigned int internal_tram_size; /* in samples */
unsigned int external_tram_size; /* in samples */
char fxbus_names[16][32]; /* names of FXBUSes */
......
......@@ -170,7 +170,7 @@ static int __devinit snd_emu10k1_init(emu10k1_t * emu, int enable_ir)
SPCS_GENERATIONSTATUS | 0x00001200 |
0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT);
if (emu->audigy && emu->revision == 4) { /* audigy2 */
if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
/* Hacks for Alice3 to work independent of haP16V driver */
u32 tmp;
......@@ -600,7 +600,7 @@ static int snd_emu10k1_free(emu10k1_t *emu)
if (emu->port)
pci_release_regions(emu->pci);
pci_disable_device(emu->pci);
if (emu->audigy && emu->revision == 4) /* P16V */
if (emu->card_capabilities->ca0151_chip) /* P16V */
snd_p16v_free(emu);
kfree(emu);
return 0;
......@@ -612,8 +612,6 @@ static int snd_emu10k1_dev_free(snd_device_t *device)
return snd_emu10k1_free(emu);
}
/* vendor, device, subsystem, emu10k1_chip, emu10k2_chip, ca0102_chip, ca0108_chip, ca0151_chip, spk71, spdif_bug, ac97_chip, ecard, driver, name */
static emu_chip_details_t emu_chip_details[] = {
/* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10011102,
......@@ -688,15 +686,22 @@ static emu_chip_details_t emu_chip_details[] = {
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
.driver = "EMU10K1", .name = "SB Live 5.1",
.emu10k1_chip = 1,
.ac97_chip = 1} ,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80401102,
.driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]",
.emu10k1_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
.driver = "EMU10K1", .name = "SBLive! Value [CT4832]",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002,
.driver = "EMU10K1", .name = "SB Live [Unknown]",
.emu10k1_chip = 1,
.ac97_chip = 1} ,
.ac97_chip = 1,
.sblive51 = 1} ,
{ } /* terminator */
};
......@@ -747,7 +752,6 @@ int __devinit snd_emu10k1_create(snd_card_t * card,
emu->revision = revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
emu->card_type = EMU10K1_CARD_CREATIVE;
snd_printdd("vendor=0x%x, device=0x%x, subsystem_vendor_id=0x%x, subsystem_id=0x%x\n",pci->vendor, pci->device, emu->serial, emu->model);
for (c = emu_chip_details; c->vendor; c++) {
......@@ -825,15 +829,6 @@ int __devinit snd_emu10k1_create(snd_card_t * card,
pci_set_master(pci);
if (c->ecard) {
emu->card_type = EMU10K1_CARD_EMUAPS;
emu->APS = 1;
}
if (! c->ac97_chip)
emu->no_ac97 = 1;
emu->spk71 = c->spk71;
emu->fx8010.fxbus_mask = 0x303f;
if (extin_mask == 0)
extin_mask = 0x3fcf;
......@@ -842,7 +837,7 @@ int __devinit snd_emu10k1_create(snd_card_t * card,
emu->fx8010.extin_mask = extin_mask;
emu->fx8010.extout_mask = extout_mask;
if (emu->APS) {
if (emu->card_capabilities->ecard) {
if ((err = snd_emu10k1_ecard_init(emu)) < 0) {
snd_emu10k1_free(emu);
return err;
......
......@@ -1077,7 +1077,7 @@ static int __devinit _snd_emu10k1_audigy_init_efx(emu10k1_t *emu)
gpr += 2;
/* PCM Side Playback (independent from stereo mix) */
if (emu->spk71) {
if (emu->card_capabilities->spk71) {
A_OP(icode, &ptr, iMAC0, A_GPR(playback+6), A_C_00000000, A_GPR(gpr), A_FXBUS(FXBUS_PCM_LEFT_SIDE));
A_OP(icode, &ptr, iMAC0, A_GPR(playback+7), A_C_00000000, A_GPR(gpr+1), A_FXBUS(FXBUS_PCM_RIGHT_SIDE));
snd_emu10k1_init_stereo_control(&controls[nctl++], "PCM Side Playback Volume", gpr, 100);
......@@ -1145,14 +1145,14 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
A_ADD_VOLUME_IN(stereo_mix, gpr, A_EXTIN_SPDIF_CD_L);
A_ADD_VOLUME_IN(stereo_mix+1, gpr+1, A_EXTIN_SPDIF_CD_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
emu->no_ac97 ? "CD Playback Volume" : "Audigy CD Playback Volume",
emu->card_capabilities->ac97_chip ? "Audigy CD Playback Volume" : "CD Playback Volume",
gpr, 0);
gpr += 2;
/* Audigy CD Capture Volume */
A_ADD_VOLUME_IN(capture, gpr, A_EXTIN_SPDIF_CD_L);
A_ADD_VOLUME_IN(capture+1, gpr+1, A_EXTIN_SPDIF_CD_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
emu->no_ac97 ? "CD Capture Volume" : "Audigy CD Capture Volume",
emu->card_capabilities->ac97_chip ? "Audigy CD Capture Volume" : "CD Capture Volume",
gpr, 0);
gpr += 2;
......@@ -1171,14 +1171,14 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
A_ADD_VOLUME_IN(stereo_mix, gpr, A_EXTIN_LINE2_L);
A_ADD_VOLUME_IN(stereo_mix+1, gpr+1, A_EXTIN_LINE2_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
emu->no_ac97 ? "Line Playback Volume" : "Line2 Playback Volume",
emu->card_capabilities->ac97_chip ? "Line2 Playback Volume" : "Line Playback Volume",
gpr, 0);
gpr += 2;
/* Line2 Capture Volume */
A_ADD_VOLUME_IN(capture, gpr, A_EXTIN_LINE2_L);
A_ADD_VOLUME_IN(capture+1, gpr+1, A_EXTIN_LINE2_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
emu->no_ac97 ? "Line Capture Volume" : "Line2 Capture Volume",
emu->card_capabilities->ac97_chip ? "Line2 Capture Volume" : "Line Capture Volume",
gpr, 0);
gpr += 2;
......@@ -1197,14 +1197,14 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
A_ADD_VOLUME_IN(stereo_mix, gpr, A_EXTIN_AUX2_L);
A_ADD_VOLUME_IN(stereo_mix+1, gpr+1, A_EXTIN_AUX2_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
emu->no_ac97 ? "Aux Playback Volume" : "Aux2 Playback Volume",
emu->card_capabilities->ac97_chip ? "Aux2 Playback Volume" : "Aux Playback Volume",
gpr, 0);
gpr += 2;
/* Aux2 Capture Volume */
A_ADD_VOLUME_IN(capture, gpr, A_EXTIN_AUX2_L);
A_ADD_VOLUME_IN(capture+1, gpr+1, A_EXTIN_AUX2_R);
snd_emu10k1_init_stereo_control(&controls[nctl++],
emu->no_ac97 ? "Aux Capture Volume" : "Aux2 Capture Volume",
emu->card_capabilities->ac97_chip ? "Aux2 Capture Volume" : "Aux Capture Volume",
gpr, 0);
gpr += 2;
......@@ -1232,7 +1232,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
snd_emu10k1_init_mono_control(&controls[nctl++], "LFE Playback Volume", gpr, 0);
gpr++;
if (emu->spk71) {
if (emu->card_capabilities->spk71) {
/* Stereo Mix Side Playback */
A_OP(icode, &ptr, iMAC0, A_GPR(playback+6), A_GPR(playback+6), A_GPR(gpr), A_GPR(stereo_mix));
A_OP(icode, &ptr, iMAC0, A_GPR(playback+7), A_GPR(playback+7), A_GPR(gpr+1), A_GPR(stereo_mix+1));
......@@ -1266,7 +1266,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 3), A_GPR(playback + 3), A_C_00000000, A_C_00000000); /* rear right */
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 4), A_GPR(playback + 4), A_C_00000000, A_C_00000000); /* center */
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 5), A_GPR(playback + 5), A_C_00000000, A_C_00000000); /* LFE */
if (emu->spk71) {
if (emu->card_capabilities->spk71) {
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 6), A_GPR(playback + 6), A_C_00000000, A_C_00000000); /* side left */
A_OP(icode, &ptr, iACC3, A_GPR(playback + SND_EMU10K1_PLAYBACK_CHANNELS + 7), A_GPR(playback + 7), A_C_00000000, A_C_00000000); /* side right */
}
......@@ -1359,7 +1359,7 @@ A_OP(icode, &ptr, iMAC0, A_GPR(var), A_GPR(var), A_GPR(vol), A_EXTIN(input))
A_PUT_STEREO_OUTPUT(A_EXTOUT_AREAR_L, A_EXTOUT_AREAR_R, playback+2 + SND_EMU10K1_PLAYBACK_CHANNELS);
A_PUT_OUTPUT(A_EXTOUT_ACENTER, playback+4 + SND_EMU10K1_PLAYBACK_CHANNELS);
A_PUT_OUTPUT(A_EXTOUT_ALFE, playback+5 + SND_EMU10K1_PLAYBACK_CHANNELS);
if (emu->spk71)
if (emu->card_capabilities->spk71)
A_PUT_STEREO_OUTPUT(A_EXTOUT_ASIDE_L, A_EXTOUT_ASIDE_R, playback+6 + SND_EMU10K1_PLAYBACK_CHANNELS);
/* headphone */
......@@ -1982,22 +1982,27 @@ static int __devinit _snd_emu10k1_init_efx(emu10k1_t *emu)
OP(icode, &ptr, iACC3, EXTOUT(EXTOUT_MIC_CAP), GPR(capture + 2), C_00000000, C_00000000);
/* EFX capture - capture the 16 EXTINS */
OP(icode, &ptr, iACC3, FXBUS2(14), C_00000000, C_00000000, EXTIN(0));
OP(icode, &ptr, iACC3, FXBUS2(15), C_00000000, C_00000000, EXTIN(1));
OP(icode, &ptr, iACC3, FXBUS2(0), C_00000000, C_00000000, EXTIN(2));
OP(icode, &ptr, iACC3, FXBUS2(3), C_00000000, C_00000000, EXTIN(3));
/* Dont connect anything to FXBUS2 1 and 2. These are shared with
* Center/LFE on the SBLive 5.1. The kX driver only changes the
* routing when it detects an SBLive 5.1.
*
* Since only 14 of the 16 EXTINs are used, this is not a big problem.
* We route AC97L and R to FX capture 14 and 15, SPDIF CD in to FX capture
* 0 and 3, then the rest of the EXTINs to the corresponding FX capture
* channel.
*/
for (z = 4; z < 14; z++) {
OP(icode, &ptr, iACC3, FXBUS2(z), C_00000000, C_00000000, EXTIN(z));
if (emu->card_capabilities->sblive51) {
/* On the Live! 5.1, FXBUS2(1) and FXBUS(2) are shared with EXTOUT_ACENTER
* and EXTOUT_ALFE, so we can't connect inputs to them for multitrack recording.
*
* Since only 14 of the 16 EXTINs are used, this is not a big problem.
* We route AC97L and R to FX capture 14 and 15, SPDIF CD in to FX capture
* 0 and 3, then the rest of the EXTINs to the corresponding FX capture
* channel. Multitrack recorders will still see the center/lfe output signal
* on the second and third channels.
*/
OP(icode, &ptr, iACC3, FXBUS2(14), C_00000000, C_00000000, EXTIN(0));
OP(icode, &ptr, iACC3, FXBUS2(15), C_00000000, C_00000000, EXTIN(1));
OP(icode, &ptr, iACC3, FXBUS2(0), C_00000000, C_00000000, EXTIN(2));
OP(icode, &ptr, iACC3, FXBUS2(3), C_00000000, C_00000000, EXTIN(3));
for (z = 4; z < 14; z++)
OP(icode, &ptr, iACC3, FXBUS2(z), C_00000000, C_00000000, EXTIN(z));
} else {
for (z = 0; z < 16; z++)
OP(icode, &ptr, iACC3, FXBUS2(z), C_00000000, C_00000000, EXTIN(z));
}
if (gpr > tmp) {
snd_BUG();
......@@ -2128,7 +2133,6 @@ static int snd_emu10k1_fx8010_info(emu10k1_t *emu, emu10k1_fx8010_info_t *info)
int res;
memset(info, 0, sizeof(info));
info->card = emu->card_type;
info->internal_tram_size = emu->fx8010.itram_size;
info->external_tram_size = emu->fx8010.etram_pages.bytes / 2;
fxbus = fxbuses;
......
......@@ -791,7 +791,7 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu)
NULL
};
if (!emu->no_ac97) {
if (emu->card_capabilities->ac97_chip) {
ac97_bus_t *pbus;
ac97_template_t ac97;
static ac97_bus_ops_t ops = {
......@@ -833,7 +833,7 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu)
for (; *c; c++)
remove_ctl(card, *c);
} else {
if (emu->APS)
if (emu->card_capabilities->ecard)
strcpy(emu->card->mixername, "EMU APS");
else if (emu->audigy)
strcpy(emu->card->mixername, "SB Audigy");
......@@ -918,7 +918,7 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu)
mix->attn[0] = 0xffff;
}
if (! emu->APS) { /* FIXME: APS has these controls? */
if (! emu->card_capabilities->ecard) { /* FIXME: APS has these controls? */
/* sb live! and audigy */
if ((kctl = snd_ctl_new1(&snd_emu10k1_spdif_mask_control, emu)) == NULL)
return -ENOMEM;
......@@ -939,14 +939,14 @@ int __devinit snd_emu10k1_mixer(emu10k1_t *emu)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
} else if (! emu->APS) {
} else if (! emu->card_capabilities->ecard) {
/* sb live! */
if ((kctl = snd_ctl_new1(&snd_emu10k1_shared_spdif, emu)) == NULL)
return -ENOMEM;
if ((err = snd_ctl_add(card, kctl)))
return err;
}
if (emu->audigy && emu->revision == 4) { /* P16V */
if (emu->card_capabilities->ca0151_chip) { /* P16V */
if ((err = snd_p16v_mixer(emu)))
return err;
}
......
......@@ -182,7 +182,7 @@ static void snd_emu10k1_proc_read(snd_info_entry_t *entry,
snd_iprintf(buffer, "EMU10K1\n\n");
snd_iprintf(buffer, "Card : %s\n",
emu->audigy ? "Audigy" : (emu->APS ? "EMU APS" : "Creative"));
emu->audigy ? "Audigy" : (emu->card_capabilities->ecard ? "EMU APS" : "Creative"));
snd_iprintf(buffer, "Internal TRAM (words) : 0x%x\n", emu->fx8010.itram_size);
snd_iprintf(buffer, "External TRAM (words) : 0x%x\n", (int)emu->fx8010.etram_pages.bytes / 2);
snd_iprintf(buffer, "\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment