Merge tag 'imx-drivers-5.19' of...

Merge tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.19:

- A series from Lucas and Paul to update GPCv2 driver for i.MX8MP power
  domains, and add HSIO and HDMI block control support.

* tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: fix semicolon.cocci warnings
  soc: imx: add i.MX8MP HDMI blk-ctrl
  soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
  soc: imx: add i.MX8MP HSIO blk-ctrl
  dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
  dt-bindings: soc: Add i.MX8MP media block control DT bindings
  soc: imx: imx8m-blk-ctrl: set power device name
  soc: imx: gpcv2: add support for i.MX8MP power domains
  soc: imx: gpcv2: add PGC control register indirection

Link: https://lore.kernel.org/r/20220508033843.2773685-2-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP Media Block Control
+
+maintainers:
+  - Paul Elder <paul.elder@ideasonboard.com>
+
+description:
+  The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral
+  providing access to the NoC and ensuring proper power sequencing of the
+  peripherals within the MEDIAMIX domain.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 10
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: mipi-dsi1
+      - const: mipi-csi1
+      - const: lcdif1
+      - const: isi
+      - const: mipi-csi2
+      - const: lcdif2
+      - const: isp
+      - const: dwe
+      - const: mipi-dsi2
+
+  clocks:
+    items:
+      - description: The APB clock
+      - description: The AXI clock
+      - description: The pixel clock for the first CSI2 receiver (aclk)
+      - description: The pixel clock for the second CSI2 receiver (aclk)
+      - description: The pixel clock for the first LCDIF (pix_clk)
+      - description: The pixel clock for the second LCDIF (pix_clk)
+      - description: The core clock for the ISP (clk)
+      - description: The MIPI-PHY reference clock used by DSI
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: cam1
+      - const: cam2
+      - const: disp1
+      - const: disp2
+      - const: isp
+      - const: phy
+
+required:
+  - compatible
+  - reg
+  - '#power-domain-cells'
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    media_blk_ctl: blk-ctl@32ec0000 {
+        compatible = "fsl,imx8mp-media-blk-ctrl", "syscon";
+        reg = <0x32ec0000 0x138>;
+        power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>,
+                        <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>,
+                        <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>,
+                        <&mipi_phy2_pd>;
+        power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi",
+                             "mipi-csi2", "lcdif2", "isp1", "dwe", "mipi-dsi2";
+        clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>;
+        clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2",
+                      "isp", "phy";
+        #power-domain-cells = <1>;
+    };
+...

drivers/soc/imx/Makefile

@@ -6,3 +6,4 @@ obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
 obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
 obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
+obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o

drivers/soc/imx/imx8m-blk-ctrl.c

@@ -15,11 +15,12 @@
 
 #include <dt-bindings/power/imx8mm-power.h>
 #include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/power/imx8mq-power.h>
 
 #define BLK_SFT_RSTN	0x0
 #define BLK_CLK_EN	0x4
-#define BLK_MIPI_RESET_DIV	0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
+#define BLK_MIPI_RESET_DIV	0x8 /* Mini/Nano/Plus DISPLAY_BLK_CTRL only */
 
 struct imx8m_blk_ctrl_domain;
 
@@ -41,7 +42,7 @@ struct imx8m_blk_ctrl_domain_data {
 	u32 clk_mask;
 
 	/*
-	 * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
+	 * i.MX8M Mini, Nano and Plus have a third DISPLAY_BLK_CTRL register
 	 * which is used to control the reset for the MIPI Phy.
 	 * Since it's only present in certain circumstances,
 	 * an if-statement should be used before setting and clearing this
@@ -241,6 +242,7 @@ static int imx8m_blk_ctrl_probe(struct platform_device *pdev)
 			ret = PTR_ERR(domain->power_dev);
 			goto cleanup_pds;
 		}
+		dev_set_name(domain->power_dev, "%s", data->name);
 
 		domain->genpd.name = data->name;
 		domain->genpd.power_on = imx8m_blk_ctrl_power_on;
@@ -590,6 +592,121 @@ static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
 	.num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
 };
 
+static int imx8mp_media_power_notifier(struct notifier_block *nb,
+				unsigned long action, void *data)
+{
+	struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+						 power_nb);
+
+	if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+		return NOTIFY_OK;
+
+	/* Enable bus clock and deassert bus reset */
+	regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
+	regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
+
+	/*
+	 * On power up we have no software backchannel to the GPC to
+	 * wait for the ADB handshake to happen, so we just delay for a
+	 * bit. On power down the GPC driver waits for the handshake.
+	 */
+	if (action == GENPD_NOTIFY_ON)
+		udelay(5);
+
+	return NOTIFY_OK;
+}
+
+/*
+ * From i.MX 8M Plus Applications Processor Reference Manual, Rev. 1,
+ * section 13.2.2, 13.2.3
+ * isp-ahb and dwe are not in Figure 13-5. Media BLK_CTRL Clocks
+ */
+static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[] = {
+	[IMX8MP_MEDIABLK_PD_MIPI_DSI_1] = {
+		.name = "mediablk-mipi-dsi-1",
+		.clk_names = (const char *[]){ "apb", "phy", },
+		.num_clks = 2,
+		.gpc_name = "mipi-dsi1",
+		.rst_mask = BIT(0) | BIT(1),
+		.clk_mask = BIT(0) | BIT(1),
+		.mipi_phy_rst_mask = BIT(17),
+	},
+	[IMX8MP_MEDIABLK_PD_MIPI_CSI2_1] = {
+		.name = "mediablk-mipi-csi2-1",
+		.clk_names = (const char *[]){ "apb", "cam1" },
+		.num_clks = 2,
+		.gpc_name = "mipi-csi1",
+		.rst_mask = BIT(2) | BIT(3),
+		.clk_mask = BIT(2) | BIT(3),
+		.mipi_phy_rst_mask = BIT(16),
+	},
+	[IMX8MP_MEDIABLK_PD_LCDIF_1] = {
+		.name = "mediablk-lcdif-1",
+		.clk_names = (const char *[]){ "disp1", "apb", "axi", },
+		.num_clks = 3,
+		.gpc_name = "lcdif1",
+		.rst_mask = BIT(4) | BIT(5) | BIT(23),
+		.clk_mask = BIT(4) | BIT(5) | BIT(23),
+	},
+	[IMX8MP_MEDIABLK_PD_ISI] = {
+		.name = "mediablk-isi",
+		.clk_names = (const char *[]){ "axi", "apb" },
+		.num_clks = 2,
+		.gpc_name = "isi",
+		.rst_mask = BIT(6) | BIT(7),
+		.clk_mask = BIT(6) | BIT(7),
+	},
+	[IMX8MP_MEDIABLK_PD_MIPI_CSI2_2] = {
+		.name = "mediablk-mipi-csi2-2",
+		.clk_names = (const char *[]){ "apb", "cam2" },
+		.num_clks = 2,
+		.gpc_name = "mipi-csi2",
+		.rst_mask = BIT(9) | BIT(10),
+		.clk_mask = BIT(9) | BIT(10),
+		.mipi_phy_rst_mask = BIT(30),
+	},
+	[IMX8MP_MEDIABLK_PD_LCDIF_2] = {
+		.name = "mediablk-lcdif-2",
+		.clk_names = (const char *[]){ "disp1", "apb", "axi", },
+		.num_clks = 3,
+		.gpc_name = "lcdif2",
+		.rst_mask = BIT(11) | BIT(12) | BIT(24),
+		.clk_mask = BIT(11) | BIT(12) | BIT(24),
+	},
+	[IMX8MP_MEDIABLK_PD_ISP] = {
+		.name = "mediablk-isp",
+		.clk_names = (const char *[]){ "isp", "axi", "apb" },
+		.num_clks = 3,
+		.gpc_name = "isp",
+		.rst_mask = BIT(16) | BIT(17) | BIT(18),
+		.clk_mask = BIT(16) | BIT(17) | BIT(18),
+	},
+	[IMX8MP_MEDIABLK_PD_DWE] = {
+		.name = "mediablk-dwe",
+		.clk_names = (const char *[]){ "axi", "apb" },
+		.num_clks = 2,
+		.gpc_name = "dwe",
+		.rst_mask = BIT(19) | BIT(20) | BIT(21),
+		.clk_mask = BIT(19) | BIT(20) | BIT(21),
+	},
+	[IMX8MP_MEDIABLK_PD_MIPI_DSI_2] = {
+		.name = "mediablk-mipi-dsi-2",
+		.clk_names = (const char *[]){ "phy", },
+		.num_clks = 1,
+		.gpc_name = "mipi-dsi2",
+		.rst_mask = BIT(22),
+		.clk_mask = BIT(22),
+		.mipi_phy_rst_mask = BIT(29),
+	},
+};
+
+static const struct imx8m_blk_ctrl_data imx8mp_media_blk_ctl_dev_data = {
+	.max_reg = 0x138,
+	.power_notifier_fn = imx8mp_media_power_notifier,
+	.domains = imx8mp_media_blk_ctl_domain_data,
+	.num_domains = ARRAY_SIZE(imx8mp_media_blk_ctl_domain_data),
+};
+
 static int imx8mq_vpu_power_notifier(struct notifier_block *nb,
 				     unsigned long action, void *data)
 {
@@ -662,6 +779,9 @@ static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
 	}, {
 		.compatible = "fsl,imx8mn-disp-blk-ctrl",
 		.data = &imx8mn_disp_blk_ctl_dev_data
+	}, {
+		.compatible = "fsl,imx8mp-media-blk-ctrl",
+		.data = &imx8mp_media_blk_ctl_dev_data
 	}, {
 		.compatible = "fsl,imx8mq-vpu-blk-ctrl",
 		.data = &imx8mq_vpu_blk_ctl_dev_data

include/dt-bindings/power/imx8mp-power.h

@@ -32,4 +32,22 @@
 #define IMX8MP_HSIOBLK_PD_PCIE				3
 #define IMX8MP_HSIOBLK_PD_PCIE_PHY			4
 
+#define IMX8MP_MEDIABLK_PD_MIPI_DSI_1			0
+#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_1			1
+#define IMX8MP_MEDIABLK_PD_LCDIF_1			2
+#define IMX8MP_MEDIABLK_PD_ISI				3
+#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_2			4
+#define IMX8MP_MEDIABLK_PD_LCDIF_2			5
+#define IMX8MP_MEDIABLK_PD_ISP				6
+#define IMX8MP_MEDIABLK_PD_DWE				7
+#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2			8
+
+#define IMX8MP_HDMIBLK_PD_IRQSTEER			0
+#define IMX8MP_HDMIBLK_PD_LCDIF				1
+#define IMX8MP_HDMIBLK_PD_PAI				2
+#define IMX8MP_HDMIBLK_PD_PVI				3
+#define IMX8MP_HDMIBLK_PD_TRNG				4
+#define IMX8MP_HDMIBLK_PD_HDMI_TX			5
+#define IMX8MP_HDMIBLK_PD_HDMI_TX_PHY			6
+
 #endif