[POWERPC] Add tsi108 pci and platform device data register function

Add Tundra Semiconductor tsi108 pci and platform device data register
function support.
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

 ---
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/sysdev/Makefile

@@ -12,3 +12,4 @@ obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_PPC_83xx)		+= ipic.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
+obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o

arch/powerpc/sysdev/tsi108_dev.c

+/*
+ * tsi108/109 device setup code
+ *
+ * Maintained by Roy Zang < tie-fei.zang@freescale.com >
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/tsi108.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+static phys_addr_t tsi108_csr_base = -1;
+
+phys_addr_t get_csrbase(void)
+{
+	struct device_node *tsi;
+
+	if (tsi108_csr_base != -1)
+		return tsi108_csr_base;
+
+	tsi = of_find_node_by_type(NULL, "tsi-bridge");
+	if (tsi) {
+		unsigned int size;
+		void *prop = get_property(tsi, "reg", &size);
+		tsi108_csr_base = of_translate_address(tsi, prop);
+		of_node_put(tsi);
+	};
+	return tsi108_csr_base;
+}
+
+u32 get_vir_csrbase(void)
+{
+	return (u32) (ioremap(get_csrbase(), 0x10000));
+}
+
+EXPORT_SYMBOL(get_csrbase);
+EXPORT_SYMBOL(get_vir_csrbase);
+
+static int __init tsi108_eth_of_init(void)
+{
+	struct device_node *np;
+	unsigned int i;
+	struct platform_device *tsi_eth_dev;
+	struct resource res;
+	int ret;
+
+	for (np = NULL, i = 0;
+	     (np = of_find_compatible_node(np, "network", "tsi-ethernet")) != NULL;
+	     i++) {
+		struct resource r[2];
+		struct device_node *phy;
+		hw_info tsi_eth_data;
+		unsigned int *id;
+		unsigned int *phy_id;
+		void *mac_addr;
+		phandle *ph;
+
+		memset(r, 0, sizeof(r));
+		memset(&tsi_eth_data, 0, sizeof(tsi_eth_data));
+
+		ret = of_address_to_resource(np, 0, &r[0]);
+		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+			__FUNCTION__,r[0].name, r[0].start, r[0].end);
+		if (ret)
+			goto err;
+
+		r[1].name = "tx";
+		r[1].start = np->intrs[0].line;
+		r[1].end = np->intrs[0].line;
+		r[1].flags = IORESOURCE_IRQ;
+
+		tsi_eth_dev =
+		    platform_device_register_simple("tsi-ethernet", i, &r[0],
+						    np->n_intrs + 1);
+
+		if (IS_ERR(tsi_eth_dev)) {
+			ret = PTR_ERR(tsi_eth_dev);
+			goto err;
+		}
+
+		mac_addr = get_property(np, "address", NULL);
+		memcpy(tsi_eth_data.mac_addr, mac_addr, 6);
+
+		ph = (phandle *) get_property(np, "phy-handle", NULL);
+		phy = of_find_node_by_phandle(*ph);
+
+		if (phy == NULL) {
+			ret = -ENODEV;
+			goto unreg;
+		}
+
+		id = (u32 *) get_property(phy, "reg", NULL);
+		phy_id = (u32 *) get_property(phy, "phy-id", NULL);
+		ret = of_address_to_resource(phy, 0, &res);
+		if (ret) {
+			of_node_put(phy);
+			goto unreg;
+		}
+		tsi_eth_data.regs = r[0].start;
+		tsi_eth_data.phyregs = res.start;
+		tsi_eth_data.phy = *phy_id;
+		tsi_eth_data.irq_num = np->intrs[0].line;
+		of_node_put(phy);
+		ret =
+		    platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
+					     sizeof(hw_info));
+		if (ret)
+			goto unreg;
+	}
+	return 0;
+unreg:
+	platform_device_unregister(tsi_eth_dev);
+err:
+	return ret;
+}
+
+arch_initcall(tsi108_eth_of_init);

include/asm-powerpc/tsi108.h

+/*
+ * include/asm-ppc/tsi108.h
+ *
+ * common routine and memory layout for Tundra TSI108(Grendel) host bridge
+ * memory controller.
+ *
+ * Author: Jacob Pan (jacob.pan@freescale.com)
+ *	   Alex Bounine (alexandreb@tundra.com)
+ * 2004 (c) Freescale Semiconductor Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PPC_KERNEL_TSI108_H
+#define __PPC_KERNEL_TSI108_H
+
+#include <asm/pci-bridge.h>
+
+/* Size of entire register space */
+#define TSI108_REG_SIZE		(0x10000)
+
+/* Sizes of register spaces for individual blocks */
+#define TSI108_HLP_SIZE		0x1000
+#define TSI108_PCI_SIZE		0x1000
+#define TSI108_CLK_SIZE		0x1000
+#define TSI108_PB_SIZE		0x1000
+#define TSI108_SD_SIZE		0x1000
+#define TSI108_DMA_SIZE		0x1000
+#define TSI108_ETH_SIZE		0x1000
+#define TSI108_I2C_SIZE		0x400
+#define TSI108_MPIC_SIZE	0x400
+#define TSI108_UART0_SIZE	0x200
+#define TSI108_GPIO_SIZE	0x200
+#define TSI108_UART1_SIZE	0x200
+
+/* Offsets within Tsi108(A) CSR space for individual blocks */
+#define TSI108_HLP_OFFSET	0x0000
+#define TSI108_PCI_OFFSET	0x1000
+#define TSI108_CLK_OFFSET	0x2000
+#define TSI108_PB_OFFSET	0x3000
+#define TSI108_SD_OFFSET	0x4000
+#define TSI108_DMA_OFFSET	0x5000
+#define TSI108_ETH_OFFSET	0x6000
+#define TSI108_I2C_OFFSET	0x7000
+#define TSI108_MPIC_OFFSET	0x7400
+#define TSI108_UART0_OFFSET	0x7800
+#define TSI108_GPIO_OFFSET	0x7A00
+#define TSI108_UART1_OFFSET	0x7C00
+
+/* Tsi108 registers used by common code components */
+#define TSI108_PCI_CSR		(0x004)
+#define TSI108_PCI_IRP_CFG_CTL	(0x180)
+#define TSI108_PCI_IRP_STAT	(0x184)
+#define TSI108_PCI_IRP_ENABLE	(0x188)
+#define TSI108_PCI_IRP_INTAD	(0x18C)
+
+#define TSI108_PCI_IRP_STAT_P_INT	(0x00400000)
+#define TSI108_PCI_IRP_ENABLE_P_INT	(0x00400000)
+
+#define TSI108_CG_PWRUP_STATUS	(0x234)
+
+#define TSI108_PB_ISR		(0x00C)
+#define TSI108_PB_ERRCS		(0x404)
+#define TSI108_PB_AERR		(0x408)
+
+#define TSI108_PB_ERRCS_ES		(1 << 1)
+#define TSI108_PB_ISR_PBS_RD_ERR	(1 << 8)
+
+#define TSI108_PCI_CFG_BASE_PHYS	(0xfb000000)
+#define TSI108_PCI_CFG_SIZE		(0x01000000)
+/* Global variables */
+
+extern u32 tsi108_pci_cfg_base;
+/* Exported functions */
+
+extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
+extern unsigned long tsi108_get_mem_size(void);
+extern unsigned long tsi108_get_cpu_clk(void);
+extern unsigned long tsi108_get_sdc_clk(void);
+extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
+				      int offset, int len, u32 val);
+extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
+				     int offset, int len, u32 * val);
+extern void tsi108_clear_pci_error(u32 pci_cfg_base);
+
+extern phys_addr_t get_csrbase(void);
+
+typedef struct {
+	u32 regs;		/* hw registers base address */
+	u32 phyregs;		/* phy registers base address */
+	u16 phy;		/* phy address */
+	u16 irq_num;		/* irq number */
+	u8 mac_addr[6];		/* phy mac address */
+} hw_info;
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_csr_vir_base;
+
+extern inline u32 tsi108_read_reg(u32 reg_offset)
+{
+	return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
+}
+
+extern inline void tsi108_write_reg(u32 reg_offset, u32 val)
+{
+	out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
+}
+
+#endif				/* __PPC_KERNEL_TSI108_H */