Commit 2baee0c5 authored by Benoit Parrot's avatar Benoit Parrot Committed by Tony Lindgren

ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only

Both CAL and VIP rely on this clock domain. But CAL DPHY require
LVDSRX_96M_GFCLK to be active. When this domain is set to HWSUP the
LVDSRX_96M_GFCLK is on;y active when VIP1 clock is also active.  If only
CAL on DRA72x (which uses the VIP2 clkctrl) probes the CAM domain is
enabled but the LVDSRX_96M_GFCLK is left gated. Since LVDSRX_96M_GFCLK
is sourcing the input clock to the DPHY then actual frame capture cannot
start as the phy are inactive.

So we either have to also enabled VIP1 even if we don't intend on using
it or we need to set the CAM domain to use SWSUP only.

This patch implements the latter.
Signed-off-by: default avatarBenoit Parrot <bparrot@ti.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 215d103f
...@@ -606,7 +606,7 @@ static struct clockdomain cam_7xx_clkdm = { ...@@ -606,7 +606,7 @@ static struct clockdomain cam_7xx_clkdm = {
.dep_bit = DRA7XX_CAM_STATDEP_SHIFT, .dep_bit = DRA7XX_CAM_STATDEP_SHIFT,
.wkdep_srcs = cam_wkup_sleep_deps, .wkdep_srcs = cam_wkup_sleep_deps,
.sleepdep_srcs = cam_wkup_sleep_deps, .sleepdep_srcs = cam_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP, .flags = CLKDM_CAN_SWSUP,
}; };
static struct clockdomain l4per_7xx_clkdm = { static struct clockdomain l4per_7xx_clkdm = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment