PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver

Add driver for the PCIe controller of the MT7621 SoC.

[bhelgaas: rename from pci-mt7621.c to pcie-mt7621.c; also rename Kconfig
symbol from PCI_MT7621 to PCIE_MT7621]
Link: https://lore.kernel.org/r/20210922050035.18162-3-sergio.paracuellos@gmail.comSigned-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/mips/ralink/Kconfig

@@ -51,7 +51,8 @@ choice
 		select SYS_SUPPORTS_HIGHMEM
 		select MIPS_GIC
 		select CLKSRC_MIPS_GIC
-		select HAVE_PCI if PCI_MT7621
+		select HAVE_PCI
+		select PCI_DRIVERS_GENERIC
 		select SOC_BUS
 endchoice
 

drivers/pci/controller/Kconfig

@@ -312,6 +312,14 @@ config PCIE_HISI_ERR
 	  Say Y here if you want error handling support
 	  for the PCIe controller's errors on HiSilicon HIP SoCs
 
+config PCIE_MT7621
+	tristate "MediaTek MT7621 PCIe Controller"
+	depends on (RALINK && SOC_MT7621) || (MIPS && COMPILE_TEST)
+	select PHY_MT7621_PCI
+	default SOC_MT7621
+	help
+	  This selects a driver for the MediaTek MT7621 PCIe Controller.
+
 source "drivers/pci/controller/dwc/Kconfig"
 source "drivers/pci/controller/mobiveil/Kconfig"
 source "drivers/pci/controller/cadence/Kconfig"

drivers/pci/controller/Makefile

@@ -37,6 +37,8 @@ obj-$(CONFIG_VMD) += vmd.o
 obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
 obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
 obj-$(CONFIG_PCIE_HISI_ERR) += pcie-hisi-error.o
+obj-$(CONFIG_PCIE_MT7621) += pcie-mt7621.o
+
 # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
 obj-y				+= dwc/
 obj-y				+= mobiveil/

drivers/staging/mt7621-pci/pci-mt7621.c → drivers/pci/controller/pcie-mt7621.c

@@ -30,18 +30,18 @@
 #include <linux/reset.h>
 #include <linux/sys_soc.h>
 
-/* MediaTek specific configuration registers */
+/* MediaTek-specific configuration registers */
 #define PCIE_FTS_NUM			0x70c
 #define PCIE_FTS_NUM_MASK		GENMASK(15, 8)
 #define PCIE_FTS_NUM_L0(x)		(((x) & 0xff) << 8)
 
 /* Host-PCI bridge registers */
 #define RALINK_PCI_PCICFG_ADDR		0x0000
-#define RALINK_PCI_PCIMSK_ADDR		0x000C
+#define RALINK_PCI_PCIMSK_ADDR		0x000c
 #define RALINK_PCI_CONFIG_ADDR		0x0020
 #define RALINK_PCI_CONFIG_DATA		0x0024
 #define RALINK_PCI_MEMBASE		0x0028
-#define RALINK_PCI_IOBASE		0x002C
+#define RALINK_PCI_IOBASE		0x002c
 
 /* PCIe RC control registers */
 #define RALINK_PCI_ID			0x0030
@@ -132,7 +132,7 @@ static inline void pcie_port_write(struct mt7621_pcie_port *port,
 static inline u32 mt7621_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
 					 unsigned int func, unsigned int where)
 {
-	return (((where & 0xF00) >> 8) << 24) | (bus << 16) | (slot << 11) |
+	return (((where & 0xf00) >> 8) << 24) | (bus << 16) | (slot << 11) |
 		(func << 8) | (where & 0xfc) | 0x80000000;
 }
 
@@ -217,7 +217,7 @@ static int setup_cm_memory_region(struct pci_host_bridge *host)
 
 	entry = resource_list_first_type(&host->windows, IORESOURCE_MEM);
 	if (!entry) {
-		dev_err(dev, "Cannot get memory resource\n");
+		dev_err(dev, "cannot get memory resource\n");
 		return -EINVAL;
 	}
 
@@ -280,7 +280,7 @@ static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
 	port->gpio_rst = devm_gpiod_get_index_optional(dev, "reset", slot,
 						       GPIOD_OUT_LOW);
 	if (IS_ERR(port->gpio_rst)) {
-		dev_err(dev, "Failed to get GPIO for PCIe%d\n", slot);
+		dev_err(dev, "failed to get GPIO for PCIe%d\n", slot);
 		err = PTR_ERR(port->gpio_rst);
 		goto remove_reset;
 	}
@@ -409,7 +409,7 @@ static int mt7621_pcie_init_ports(struct mt7621_pcie *pcie)
 
 		err = mt7621_pcie_init_port(port);
 		if (err) {
-			dev_err(dev, "Initiating port %d failed\n", slot);
+			dev_err(dev, "initializing port %d failed\n", slot);
 			list_del(&port->list);
 		}
 	}
@@ -476,7 +476,7 @@ static int mt7621_pcie_enable_ports(struct pci_host_bridge *host)
 
 	entry = resource_list_first_type(&host->windows, IORESOURCE_IO);
 	if (!entry) {
-		dev_err(dev, "Cannot get io resource\n");
+		dev_err(dev, "cannot get io resource\n");
 		return -EINVAL;
 	}
 
@@ -541,25 +541,25 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 
 	err = mt7621_pcie_parse_dt(pcie);
 	if (err) {
-		dev_err(dev, "Parsing DT failed\n");
+		dev_err(dev, "parsing DT failed\n");
 		return err;
 	}
 
 	err = mt7621_pcie_init_ports(pcie);
 	if (err) {
-		dev_err(dev, "Nothing connected in virtual bridges\n");
+		dev_err(dev, "nothing connected in virtual bridges\n");
 		return 0;
 	}
 
 	err = mt7621_pcie_enable_ports(bridge);
 	if (err) {
-		dev_err(dev, "Error enabling pcie ports\n");
+		dev_err(dev, "error enabling pcie ports\n");
 		goto remove_resets;
 	}
 
 	err = setup_cm_memory_region(bridge);
 	if (err) {
-		dev_err(dev, "Error setting up iocu mem regions\n");
+		dev_err(dev, "error setting up iocu mem regions\n");
 		goto remove_resets;
 	}
 

drivers/staging/Kconfig

@@ -86,8 +86,6 @@ source "drivers/staging/vc04_services/Kconfig"
 
 source "drivers/staging/pi433/Kconfig"
 
-source "drivers/staging/mt7621-pci/Kconfig"
-
 source "drivers/staging/mt7621-dma/Kconfig"
 
 source "drivers/staging/ralink-gdma/Kconfig"

drivers/staging/Makefile

@@ -33,7 +33,6 @@ obj-$(CONFIG_KS7010)		+= ks7010/
 obj-$(CONFIG_GREYBUS)		+= greybus/
 obj-$(CONFIG_BCM2835_VCHIQ)	+= vc04_services/
 obj-$(CONFIG_PI433)		+= pi433/
-obj-$(CONFIG_PCI_MT7621)	+= mt7621-pci/
 obj-$(CONFIG_SOC_MT7621)	+= mt7621-dma/
 obj-$(CONFIG_DMA_RALINK)	+= ralink-gdma/
 obj-$(CONFIG_SOC_MT7621)	+= mt7621-dts/

drivers/staging/mt7621-pci/Kconfig

-# SPDX-License-Identifier: GPL-2.0
-config PCI_MT7621
-	tristate "MediaTek MT7621 PCI Controller"
-	depends on RALINK
-	select PCI_DRIVERS_GENERIC
-	help
-	  This selects a driver for the MediaTek MT7621 PCI Controller.
-

drivers/staging/mt7621-pci/Makefile

-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PCI_MT7621)       += pci-mt7621.o

drivers/staging/mt7621-pci/TODO

-
-- general code review and cleanup
-
-Cc: NeilBrown <neil@brown.name>

drivers/staging/mt7621-pci/mediatek,mt7621-pci.txt

-MediaTek MT7621 PCIe controller
-
-Required properties:
-- compatible: "mediatek,mt7621-pci"
-- device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe subsys and root ports.
-- bus-range: Range of bus numbers associated with this controller.
-- #address-cells: Address representation for root ports (must be 3)
-- pinctrl-names : The pin control state names.
-- pinctrl-0: The "default" pinctrl state.
-- #size-cells: Size representation for root ports (must be 2)
-- ranges: Ranges for the PCI memory and I/O regions.
-- #interrupt-cells: Must be 1
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties.
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-- status: either "disabled" or "okay".
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
-  root ports.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must be "pcie0", "pcie1", "pcieN"... based on the number of
-  root ports.
-- reset-gpios: GPIO specs for the reset pins.
-
-In addition, the device tree node must have sub-nodes describing each PCIe port
-interface, having the following mandatory properties:
-
-Required properties:
-- reg: Only the first four bytes are used to refer to the correct bus number
-      and device number.
-- #address-cells: Must be 3
-- #size-cells: Must be 2
-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
-  property is sufficient.
-- bus-range: Range of bus numbers associated with this port.
-
-Example for MT7621:
-
-	pcie: pcie@1e140000 {
-		compatible = "mediatek,mt7621-pci";
-        reg = <0x1e140000 0x100    /* host-pci bridge registers */
-               0x1e142000 0x100    /* pcie port 0 RC control registers */
-               0x1e143000 0x100    /* pcie port 1 RC control registers */
-               0x1e144000 0x100>;  /* pcie port 2 RC control registers */
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_pins>;
-
-		device_type = "pci";
-
-		bus-range = <0 255>;
-		ranges = <
-			0x02000000 0 0x00000000 0x60000000 0 0x10000000 /* pci memory */
-			0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
-		>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xF0000 0 0 1>;
-		interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
-				<0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
-				<0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
-
-		status = "disabled";
-
-		resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>;
-		reset-names = "pcie0", "pcie1", "pcie2";
-		clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
-		clock-names = "pcie0", "pcie1", "pcie2";
-
-		reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
-				<&gpio 8 GPIO_ACTIVE_LOW>,
-				<&gpio 7 GPIO_ACTIVE_LOW>;
-
-		pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-			bus-range = <0x00 0xff>;
-		};
-
-		pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-			bus-range = <0x00 0xff>;
-		};
-
-		pcie@2,0 {
-			reg = <0x1000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-			bus-range = <0x00 0xff>;
-		};
-	};
-