Merge tag 'at91-cleanup2' of...

Merge tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup

Pull "Second batch of cleanup/SoC for 3.19" from Nicolas Ferre:

- fixes following legacy board removal
- removal of an unused config option CONFIG_MACH_SAMA5_DT
- move of some header files out of include/mach directory

* tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91: move sdramc/ddrsdr header to include/soc/at91
  ARM: at91: remove CONFIG_MACH_SAMA5_DT
  ARM: at91: remove unused CONFIG_ARCH_AT91SAM9G45 option
  ARM: at91: remove useless init_time for DT-only SoCs
  ARM: at91: fix build breakage due to legacy board removals
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -861,6 +861,7 @@ W:	http://maxim.org.za/at91_26.html
 W:	http://www.linux4sam.org
 S:	Supported
 F:	arch/arm/mach-at91/
+F:	include/soc/at91/
 F:	arch/arm/boot/dts/at91*.dts
 F:	arch/arm/boot/dts/at91*.dtsi
 F:	arch/arm/boot/dts/sama*.dts

arch/arm/configs/sama5_defconfig

@@ -20,7 +20,6 @@ CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAM_V7=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
-CONFIG_MACH_SAMA5_DT=y
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 CONFIG_ZBOOT_ROM_TEXT=0x0

arch/arm/mach-at91/Kconfig

@@ -54,6 +54,7 @@ config SOC_SAMA5
 	select USE_OF
 	select MEMORY
 	select ATMEL_SDRAMC
+	select PHYLIB if NETDEVICES
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -207,15 +208,6 @@ config MACH_AT91SAM9_DT
 	  Select this if you want to experiment device-tree with
 	  an Atmel Evaluation Kit.
 
-config MACH_SAMA5_DT
-	bool "Atmel SAMA5 Evaluation Kits with device-tree support"
-	depends on SOC_SAMA5
-	select USE_OF
-	select PHYLIB if NETDEVICES
-	help
-	  Select this if you want to experiment device-tree with
-	  an Atmel Evaluation Kit.
-
 # ----------------------------------------------------------
 
 comment "AT91 Feature Selections"

arch/arm/mach-at91/Makefile

@@ -71,7 +71,7 @@ obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
 obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
 
 # SAMA5 board with device-tree
-obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o
+obj-$(CONFIG_SOC_SAMA5)		+= board-dt-sama5.o
 
 # Drivers
 obj-y				+= leds.o

arch/arm/mach-at91/Makefile.boot

@@ -3,12 +3,6 @@
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
 
-ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
-   zreladdr-y	+= 0x70008000
-params_phys-y	:= 0x70000100
-initrd_phys-y	:= 0x70410000
-else
    zreladdr-y	+= 0x20008000
 params_phys-y	:= 0x20000100
 initrd_phys-y	:= 0x20410000
-endif

arch/arm/mach-at91/board.h

@@ -56,11 +56,7 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/
-#if defined(CONFIG_ARCH_AT91SAM9G45)
-extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
-#else
 extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-#endif
 
  /* SPI */
 extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);

arch/arm/mach-at91/include/mach/at91_ramc.h

@@ -25,8 +25,8 @@ extern void __iomem *at91_ramc_base[];
 #define AT91_MEMCTRL_SDRAMC	1
 #define AT91_MEMCTRL_DDRSDR	2
 
-#include <mach/at91rm9200_sdramc.h>
-#include <mach/at91sam9_ddrsdr.h>
-#include <mach/at91sam9_sdramc.h>
+#include <soc/at91/at91rm9200_sdramc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
 
 #endif /* __AT91_RAMC_H__ */

arch/arm/mach-at91/pm.h

@@ -14,7 +14,6 @@
 #include <asm/proc-fns.h>
 
 #include <mach/at91_ramc.h>
-#include <mach/at91rm9200_sdramc.h>
 
 #ifdef CONFIG_PM
 extern void at91_pm_set_standby(void (*at91_standby)(void));

drivers/power/reset/at91-reset.c

@@ -19,8 +19,8 @@
 
 #include <asm/system_misc.h>
 
-#include <mach/at91sam9_ddrsdr.h>
-#include <mach/at91sam9_sdramc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
 
 #define AT91_RSTC_CR	0x00		/* Reset Controller Control Register */
 #define AT91_RSTC_PROCRST	BIT(0)		/* Processor Reset */