Commit 2c323058 authored by Sujith Manoharan's avatar Sujith Manoharan Committed by John W. Linville

ath9k: Add hardware support for QCA9531

Signed-off-by: default avatarSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent b6b5730d
......@@ -3598,7 +3598,7 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
AR_SWITCH_TABLE_COM_AR9462_ALL, value);
} else if (AR_SREV_9550(ah)) {
} else if (AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,
AR_SWITCH_TABLE_COM_AR9550_ALL, value);
} else
......@@ -3975,7 +3975,7 @@ static void ar9003_hw_apply_tuning_caps(struct ath_hw *ah)
struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
u8 tuning_caps_param = eep->baseEepHeader.params_for_tuning_caps[0];
if (AR_SREV_9340(ah))
if (AR_SREV_9340(ah) || AR_SREV_9531(ah))
return;
if (eep->baseEepHeader.featureEnable & 0x40) {
......@@ -4030,7 +4030,10 @@ static void ar9003_hw_xpa_timing_control_apply(struct ath_hw *ah, bool is2ghz)
if (!(eep->baseEepHeader.featureEnable & 0x80))
return;
if (!AR_SREV_9300(ah) && !AR_SREV_9340(ah) && !AR_SREV_9580(ah))
if (!AR_SREV_9300(ah) &&
!AR_SREV_9340(ah) &&
!AR_SREV_9580(ah) &&
!AR_SREV_9531(ah))
return;
xpa_ctl = ar9003_modal_header(ah, is2ghz)->txFrameToXpaOn;
......@@ -4163,7 +4166,7 @@ static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
ar9003_hw_xlna_bias_strength_apply(ah, is2ghz);
ar9003_hw_atten_apply(ah, chan);
ar9003_hw_quick_drop_apply(ah, chan->channel);
if (!AR_SREV_9330(ah) && !AR_SREV_9340(ah))
if (!AR_SREV_9330(ah) && !AR_SREV_9340(ah) && !AR_SREV_9531(ah))
ar9003_hw_internal_regulator_apply(ah);
ar9003_hw_apply_tuning_caps(ah);
ar9003_hw_apply_minccapwr_thresh(ah, chan);
......@@ -4788,7 +4791,7 @@ static void ar9003_hw_power_control_override(struct ath_hw *ah,
}
tempslope:
if (AR_SREV_9550(ah)) {
if (AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
/*
* AR955x has tempSlope register for each chain.
* Check whether temp_compensation feature is enabled or not.
......
......@@ -103,7 +103,7 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
} else {
channelSel = CHANSEL_2G(freq) >> 1;
}
} else if (AR_SREV_9550(ah)) {
} else if (AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
if (ah->is_clk_25mhz)
div = 75;
else
......@@ -118,7 +118,7 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
/* Set to 2G mode */
bMode = 1;
} else {
if ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) &&
if ((AR_SREV_9340(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) &&
ah->is_clk_25mhz) {
channelSel = freq / 75;
chan_frac = ((freq % 75) * 0x20000) / 75;
......@@ -810,10 +810,12 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
/*
* TXGAIN initvals.
*/
if (AR_SREV_9550(ah)) {
int modes_txgain_index;
if (AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
int modes_txgain_index = 1;
if (AR_SREV_9550(ah))
modes_txgain_index = ar9550_hw_get_modes_txgain_index(ah, chan);
modes_txgain_index = ar9550_hw_get_modes_txgain_index(ah, chan);
if (modes_txgain_index < 0)
return -EINVAL;
......@@ -1862,7 +1864,7 @@ bool ar9003_hw_bb_watchdog_check(struct ath_hw *ah)
case 0x04000b09:
return true;
case 0x04000409:
if (AR_SREV_9340(ah))
if (AR_SREV_9340(ah) || AR_SREV_9531(ah))
return false;
else
return true;
......
......@@ -757,7 +757,7 @@ static void ath9k_hw_init_pll(struct ath_hw *ah,
/* program BB PLL phase_shift */
REG_RMW_FIELD(ah, AR_CH0_BB_DPLL3,
AR_CH0_BB_DPLL3_PHASE_SHIFT, 0x1);
} else if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
} else if (AR_SREV_9340(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
u32 regval, pll2_divint, pll2_divfrac, refdiv;
REG_WRITE(ah, AR_RTC_PLL_CONTROL, 0x1142c);
......@@ -767,9 +767,15 @@ static void ath9k_hw_init_pll(struct ath_hw *ah,
udelay(100);
if (ah->is_clk_25mhz) {
pll2_divint = 0x54;
pll2_divfrac = 0x1eb85;
refdiv = 3;
if (AR_SREV_9531(ah)) {
pll2_divint = 0x1c;
pll2_divfrac = 0xa3d2;
refdiv = 1;
} else {
pll2_divint = 0x54;
pll2_divfrac = 0x1eb85;
refdiv = 3;
}
} else {
if (AR_SREV_9340(ah)) {
pll2_divint = 88;
......@@ -783,7 +789,10 @@ static void ath9k_hw_init_pll(struct ath_hw *ah,
}
regval = REG_READ(ah, AR_PHY_PLL_MODE);
regval |= (0x1 << 16);
if (AR_SREV_9531(ah))
regval |= (0x1 << 22);
else
regval |= (0x1 << 16);
REG_WRITE(ah, AR_PHY_PLL_MODE, regval);
udelay(100);
......@@ -793,14 +802,33 @@ static void ath9k_hw_init_pll(struct ath_hw *ah,
regval = REG_READ(ah, AR_PHY_PLL_MODE);
if (AR_SREV_9340(ah))
regval = (regval & 0x80071fff) | (0x1 << 30) |
(0x1 << 13) | (0x4 << 26) | (0x18 << 19);
regval = (regval & 0x80071fff) |
(0x1 << 30) |
(0x1 << 13) |
(0x4 << 26) |
(0x18 << 19);
else if (AR_SREV_9531(ah))
regval = (regval & 0x01c00fff) |
(0x1 << 31) |
(0x2 << 29) |
(0xa << 25) |
(0x1 << 19) |
(0x6 << 12);
else
regval = (regval & 0x80071fff) | (0x3 << 30) |
(0x1 << 13) | (0x4 << 26) | (0x60 << 19);
regval = (regval & 0x80071fff) |
(0x3 << 30) |
(0x1 << 13) |
(0x4 << 26) |
(0x60 << 19);
REG_WRITE(ah, AR_PHY_PLL_MODE, regval);
REG_WRITE(ah, AR_PHY_PLL_MODE,
REG_READ(ah, AR_PHY_PLL_MODE) & 0xfffeffff);
if (AR_SREV_9531(ah))
REG_WRITE(ah, AR_PHY_PLL_MODE,
REG_READ(ah, AR_PHY_PLL_MODE) & 0xffbfffff);
else
REG_WRITE(ah, AR_PHY_PLL_MODE,
REG_READ(ah, AR_PHY_PLL_MODE) & 0xfffeffff);
udelay(1000);
}
......@@ -1614,7 +1642,7 @@ static void ath9k_hw_init_desc(struct ath_hw *ah)
}
#ifdef __BIG_ENDIAN
else if (AR_SREV_9330(ah) || AR_SREV_9340(ah) ||
AR_SREV_9550(ah))
AR_SREV_9550(ah) || AR_SREV_9531(ah))
REG_RMW(ah, AR_CFG, AR_CFG_SWRB | AR_CFG_SWTB, 0);
else
REG_WRITE(ah, AR_CFG, AR_CFG_SWTD | AR_CFG_SWRD);
......
......@@ -419,7 +419,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
rfilt |= ATH9K_RX_FILTER_MCAST_BCAST_ALL;
}
if (AR_SREV_9550(sc->sc_ah))
if (AR_SREV_9550(sc->sc_ah) || AR_SREV_9531(sc->sc_ah))
rfilt |= ATH9K_RX_FILTER_4ADDRESS;
return rfilt;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment