pinctrl: add pinctrl driver for imx6sx

Add a pinctrl driver for i.MX6 SoloX based on pinctrl-imx core
driver.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt

+* Freescale i.MX6 SoloX IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sx-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx6sx-pinfunc.h under device tree source folder.  The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX6 SoloX
+  Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (0 << 6)
+PAD_CTL_SPEED_MED               (1 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_260ohm              (1 << 3)
+PAD_CTL_DSE_130ohm              (2 << 3)
+PAD_CTL_DSE_87ohm               (3 << 3)
+PAD_CTL_DSE_65ohm               (4 << 3)
+PAD_CTL_DSE_52ohm               (5 << 3)
+PAD_CTL_DSE_43ohm               (6 << 3)
+PAD_CTL_DSE_37ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)

drivers/pinctrl/Kconfig

@@ -188,6 +188,13 @@ config PINCTRL_IMX6SL
 	help
 	  Say Y here to enable the imx6sl pinctrl driver
 
+config PINCTRL_IMX6SX
+	bool "IMX6SX pinctrl driver"
+	depends on SOC_IMX6SX
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx6sx pinctrl driver
+
 config PINCTRL_VF610
 	bool "Freescale Vybrid VF610 pinctrl driver"
 	depends on SOC_VF610

drivers/pinctrl/Makefile

@@ -32,6 +32,7 @@ obj-$(CONFIG_PINCTRL_IMX53)	+= pinctrl-imx53.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6q.o
 obj-$(CONFIG_PINCTRL_IMX6Q)	+= pinctrl-imx6dl.o
 obj-$(CONFIG_PINCTRL_IMX6SL)	+= pinctrl-imx6sl.o
+obj-$(CONFIG_PINCTRL_IMX6SX)	+= pinctrl-imx6sx.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o