Merge tag 'socfpga_dts_for_v4.11_part_1' of...

Merge tag 'socfpga_dts_for_v4.11_part_1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS updates for v4.11, part 1
- Adds FPGA manager bits
- Enable I2C on Cyclone5 and Arria5 devkits
- Adds LED support on C5/A5 devkits
- Enables CAN on C5 devkit
- Enables watchdog
- Add NAND on Arria10
- Add the LTC2977 Power Monitor on Arria10 devkit

* tag 'socfpga_dts_for_v4.11_part_1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: add missing compatible string for SDRAM controller
  ARM: dts: socfpga: add fpga region support on Arria10
  ARM: dts: socfpga: add base fpga region and fpga bridges
  ARM: dts: socfpga: fpga manager data is 32 bits
  ARM: dts: socfpga: Add NAND device tree for Arria10
  ARM: dts: socfpga: add fpga-manager node for Arria10
  ARM: dts: socfpga: add the LTC2977 power monitor on Arria10 devkit
  ARM: dts: socfpga: enable watchdog timer on Arria5 and Arria10
  ARM: dts: socfpga: enable CAN on Cyclone5 devkit
  ARM: dts: socfpga: Add Rohm DH2228FV DAC
  ARM: dts: socfpga: set desired i2c clock on Cyclone5 and Arria5 devkits
  ARM: dts: socfpga: enable GPIO and LEDs for Cyclone5 and Arria5 devkits
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -718,6 +718,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_socdk_nand.dtb \
 	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
 	socfpga_cyclone5_mcvevk.dtb \

arch/arm/boot/dts/socfpga.dtsi

@@ -93,6 +93,14 @@ pdma: pdma@ffe01000 {
 			};
 		};
 
+		base_fpga_region {
+			compatible = "fpga-region";
+			fpga-mgr = <&fpgamgr0>;
+
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+		};
+
 		can0: can@ffc00000 {
 			compatible = "bosch,d_can";
 			reg = <0xffc00000 0x1000>;
@@ -513,10 +521,24 @@ h2f_user2_clk: h2f_user2_clk {
 				};
 		};
 
+		fpga_bridge0: fpga_bridge@ff400000 {
+			compatible = "altr,socfpga-lwhps2fpga-bridge";
+			reg = <0xff400000 0x100000>;
+			resets = <&rst LWHPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+		};
+
+		fpga_bridge1: fpga_bridge@ff500000 {
+			compatible = "altr,socfpga-hps2fpga-bridge";
+			reg = <0xff500000 0x10000>;
+			resets = <&rst HPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+		};
+
 		fpgamgr0: fpgamgr@ff706000 {
 			compatible = "altr,socfpga-fpga-mgr";
 			reg = <0xff706000 0x1000
-			       0xffb90000 0x1000>;
+			       0xffb90000 0x4>;
 			interrupts = <0 175 4>;
 		};
 
@@ -694,6 +716,11 @@ L2: l2-cache@fffef000 {
 			arm,prefetch-offset = <7>;
 		};
 
+		l3regs@0xff800000 {
+			compatible = "altr,l3regs", "syscon";
+			reg = <0xff800000 0x1000>;
+		};
+
 		mmc: dwmmc0@ff704000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = <0xff704000 0x1000>;
@@ -751,7 +778,7 @@ scu: snoop-control-unit@fffec000 {
 		};
 
 		sdr: sdr@ffc25000 {
-			compatible = "syscon";
+			compatible = "altr,sdr-ctl", "syscon";
 			reg = <0xffc25000 0x1000>;
 		};
 

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -83,6 +83,14 @@ pdma: pdma@ffda1000 {
 			};
 		};
 
+		base_fpga_region {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+
 		clkmgr@ffd04000 {
 				compatible = "altr,clk-mgr";
 				reg = <0xffd04000 0x1000>;
@@ -512,6 +520,15 @@ portc: gpio-controller@0 {
 			};
 		};
 
+		fpga_mgr: fpga-mgr@ffd03000 {
+			compatible = "altr,socfpga-a10-fpga-mgr";
+			reg = <0xffd03000 0x100
+			       0xffcfe400 0x20>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst FPGAMGR_RESET>;
+			reset-names = "fpgamgr";
+		};
+
 		i2c0: i2c@ffc02200 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -578,7 +595,7 @@ spi1: spi@ffda5000 {
 		};
 
 		sdr: sdr@ffc25000 {
-			compatible = "syscon";
+			compatible = "altr,sdr-ctl", "syscon";
 			reg = <0xffcfb100 0x80>;
 		};
 
@@ -605,6 +622,19 @@ mmc: dwmmc0@ff808000 {
 			status = "disabled";
 		};
 
+		nand: nand@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "denali,denali-nand-dt", "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x72000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 99 4>;
+			dma-mask = <0xffffffff>;
+			clocks = <&nand_clk>;
+			status = "disabled";
+		};
+
 		ocram: sram@ffe00000 {
 			compatible = "mmio-sram";
 			reg = <0xffe00000 0x40000>;

arch/arm/boot/dts/socfpga_arria10_socdk.dtsi

@@ -145,6 +145,11 @@ rtc@68 {
 		compatible = "dallas,ds1339";
 		reg = <0x68>;
 	};
+
+	ltc@5c {
+		compatible = "ltc2977";
+		reg = <0x5c>;
+	};
 };
 
 &uart1 {
@@ -154,3 +159,7 @@ &uart1 {
 &usb0 {
 	status = "okay";
 };
+
+&watchdog0 {
+	status = "okay";
+};

arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts

+/*
+ * Copyright (C) 2015 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&nand {
+	status = "okay";
+
+	partition@nand-boot {
+		label = "Boot and fpga data";
+		reg = <0x0 0x1C00000>;
+	};
+	partition@nand-rootfs {
+		label = "Root Filesystem - JFFS2";
+		reg = <0x1C00000 0x6400000>;
+	};
+};

arch/arm/boot/dts/socfpga_arria5.dtsi

@@ -42,3 +42,7 @@ sysmgr@ffd08000 {
 		};
 	};
 };
+
+&watchdog0 {
+	status = "okay";
+};

arch/arm/boot/dts/socfpga_arria5_socdk.dts

@@ -39,6 +39,29 @@ aliases {
 		ethernet0 = &gmac1;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&porta 0 1>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 11 1>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&porta 17 1>;
+		};
+
+		hps3 {
+			label = "hps_led3";
+			gpios = <&porta 18 1>;
+		};
+	};
+
 	regulator_3_3v: 3-3-v-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
@@ -61,8 +84,28 @@ &gmac1 {
 	rxc-skew-ps = <2000>;
 };
 
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
 
 	eeprom@51 {
 		compatible = "atmel,24c32";

arch/arm/boot/dts/socfpga_cyclone5_socdk.dts

@@ -39,6 +39,29 @@ aliases {
 		ethernet0 = &gmac1;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 15 1>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 14 1>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 13 1>;
+		};
+
+		hps3 {
+			label = "hps_led3";
+			gpios = <&portb 12 1>;
+		};
+	};
+
 	regulator_3_3v: 3-3-v-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
@@ -47,6 +70,10 @@ regulator_3_3v: 3-3-v-regulator {
 	};
 };
 
+&can0 {
+	status = "okay";
+};
+
 &gmac1 {
 	status = "okay";
 	phy-mode = "rgmii";
@@ -61,12 +88,28 @@ &gmac1 {
 	rxc-skew-ps = <2000>;
 };
 
+&gpio0 {
+	status = "okay";
+};
+
 &gpio1 {
 	status = "okay";
 };
 
+&gpio2 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
 
 	eeprom@51 {
 		compatible = "atmel,24c32";
@@ -120,6 +163,16 @@ partition@qspi-rootfs {
 	};
 };
 
+&spi0 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
 &usb1 {
 	status = "okay";
 };