Commit 2d466e11 authored by Frank Schaefer's avatar Frank Schaefer Committed by Mauro Carvalho Chehab

[media] em28xx: fix and separate the board hints for sensor devices

The current board hint code is mixed together with the sensor detection and
initialization code. It actually selects a board depending on the detected
sensor type only, with the result that 3 of the 6 webcam boards are currently
dead.
Separate it and move it to em28xx_hint_board() which already contains the board
hints for analog capturing+TV and DVB devices.
This way, we have all board hints at a common place which makes it easier
to extend the code and reduces the risk of regressions.
It also makes it possible again to use the boards EM2750_BOARD_DLCW_130,
EM2820_BOARD_VIDEOLOGY_20K14XUSB and EM2860_BOARD_NETGMBH_CAM (using the module
parameter "card").
NOTE: the current board hint logic for webcams is preserved. Not more not less.
Signed-off-by: default avatarFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 72cc9ba3
......@@ -2333,9 +2333,6 @@ static int em28xx_hint_sensor(struct em28xx *dev)
switch (version) {
case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
em28xx_set_model(dev);
sensor_name = "mt9v011";
dev->em28xx_sensor = EM28XX_MT9V011;
dev->sensor_xres = 640;
......@@ -2359,9 +2356,6 @@ static int em28xx_hint_sensor(struct em28xx *dev)
break;
case 0x143a: /* MT9M111 as found in the ECS G200 */
dev->model = EM2750_BOARD_UNKNOWN;
em28xx_set_model(dev);
sensor_name = "mt9m111";
dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
dev->em28xx_sensor = EM28XX_MT9M111;
......@@ -2375,9 +2369,6 @@ static int em28xx_hint_sensor(struct em28xx *dev)
break;
case 0x8431:
dev->model = EM2750_BOARD_UNKNOWN;
em28xx_set_model(dev);
sensor_name = "mt9m001";
dev->em28xx_sensor = EM28XX_MT9M001;
em28xx_initialize_mt9m001(dev);
......@@ -2394,11 +2385,7 @@ static int em28xx_hint_sensor(struct em28xx *dev)
return -EINVAL;
}
/* Setup webcam defaults */
em28xx_pre_card_setup(dev);
em28xx_errdev("Sensor is %s, using model %s entry.\n",
sensor_name, em28xx_boards[dev->model].name);
em28xx_info("sensor %s detected\n", sensor_name);
return 0;
}
......@@ -2628,6 +2615,18 @@ static int em28xx_hint_board(struct em28xx *dev)
{
int i;
if (dev->board.is_webcam) {
if (dev->em28xx_sensor == EM28XX_MT9V011) {
dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
} else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
dev->em28xx_sensor == EM28XX_MT9M111) {
dev->model = EM2750_BOARD_UNKNOWN;
}
/* FIXME: IMPROVE ! */
return 0;
}
/* HINT method: EEPROM
*
* This method works only for boards with eeprom.
......@@ -2719,10 +2718,10 @@ static void em28xx_card_setup(struct em28xx *dev)
dev->progressive = 1;
}
if (!dev->board.is_webcam) {
switch (dev->model) {
case EM2820_BOARD_UNKNOWN:
case EM2800_BOARD_UNKNOWN:
switch (dev->model) {
case EM2750_BOARD_UNKNOWN:
case EM2820_BOARD_UNKNOWN:
case EM2800_BOARD_UNKNOWN:
/*
* The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
*
......@@ -2743,9 +2742,8 @@ static void em28xx_card_setup(struct em28xx *dev)
em28xx_pre_card_setup(dev);
}
break;
default:
em28xx_set_model(dev);
}
default:
em28xx_set_model(dev);
}
em28xx_info("Identified as %s (card=%d)\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment