pinctrl: renesas: rzg2l: Add BUILD_BUG_ON() checks

Add BUILD_BUG_ON() checks to avoid overflows for GPIO configs for each
supported SoC.

While at it, for readability set n_port_pins based on the GPIO pin configs
and not on GPIO names for r9a07g044_data as done for r9a07g043_data.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-4-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

drivers/pinctrl/renesas/pinctrl-rzg2l.c

@@ -1468,6 +1468,12 @@ static int rzg2l_pinctrl_probe(struct platform_device *pdev)
 	struct rzg2l_pinctrl *pctrl;
 	int ret;
 
+	BUILD_BUG_ON(ARRAY_SIZE(rzg2l_gpio_configs) * RZG2L_PINS_PER_PORT >
+		     ARRAY_SIZE(rzg2l_gpio_names));
+
+	BUILD_BUG_ON(ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT >
+		     ARRAY_SIZE(rzg2l_gpio_names));
+
 	pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
 	if (!pctrl)
 		return -ENOMEM;
@@ -1531,7 +1537,7 @@ static struct rzg2l_pinctrl_data r9a07g044_data = {
 	.port_pin_configs = rzg2l_gpio_configs,
 	.n_ports = ARRAY_SIZE(rzg2l_gpio_configs),
 	.dedicated_pins = rzg2l_dedicated_pins.common,
-	.n_port_pins = ARRAY_SIZE(rzg2l_gpio_names),
+	.n_port_pins = ARRAY_SIZE(rzg2l_gpio_configs) * RZG2L_PINS_PER_PORT,
 	.n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common) +
 		ARRAY_SIZE(rzg2l_dedicated_pins.rzg2l_pins),
 };