ide: rework the code for selecting the best DMA transfer mode (v3)

Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch.

* add ide_hwif_t.udma_filter hook for filtering UDMA mask
  (use it in alim15x3, hpt366, siimage and serverworks drivers)
* add ide_max_dma_mode() for finding best DMA mode for the device
  (loosely based on some older libata-core.c code)
* convert ide_dma_speed() users to use ide_max_dma_mode()
* make ide_rate_filter() take "ide_drive_t *drive" as an argument instead
  of "u8 mode" and teach it to how to use UDMA mask to do filtering
* use ide_rate_filter() in hpt366 driver
* remove no longer needed ide_dma_speed() and *_ratemask()
* unexport eighty_ninty_three()

v2:
* rename ->filter_udma_mask to ->udma_filter
  [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]

v3:
* updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space
  originated transfer mode change requests when 100MHz clock is used)
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 18137207
......@@ -342,7 +342,7 @@ static int icside_dma_check(ide_drive_t *drive)
* Enable DMA on any drive that has multiword DMA
*/
if (id->field_valid & 2) {
xfer_mode = ide_dma_speed(drive, 0);
xfer_mode = ide_max_dma_mode(drive);
goto out;
}
......
......@@ -1004,7 +1004,7 @@ static int cris_ide_build_dmatable (ide_drive_t *drive)
static int cris_config_drive_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, 1);
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......
......@@ -705,6 +705,80 @@ int ide_use_dma(ide_drive_t *drive)
EXPORT_SYMBOL_GPL(ide_use_dma);
static const u8 xfer_mode_bases[] = {
XFER_UDMA_0,
XFER_MW_DMA_0,
XFER_SW_DMA_0,
};
static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = drive->hwif;
unsigned int mask = 0;
switch(base) {
case XFER_UDMA_0:
if ((id->field_valid & 4) == 0)
break;
mask = id->dma_ultra & hwif->ultra_mask;
if (hwif->udma_filter)
mask &= hwif->udma_filter(drive);
if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
mask &= 0x07;
break;
case XFER_MW_DMA_0:
mask = id->dma_mword & hwif->mwdma_mask;
break;
case XFER_SW_DMA_0:
mask = id->dma_1word & hwif->swdma_mask;
break;
default:
BUG();
break;
}
return mask;
}
/**
* ide_max_dma_mode - compute DMA speed
* @drive: IDE device
*
* Checks the drive capabilities and returns the speed to use
* for the DMA transfer. Returns 0 if the drive is incapable
* of DMA transfers.
*/
u8 ide_max_dma_mode(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
unsigned int mask;
int x, i;
u8 mode = 0;
if (drive->media != ide_disk && hwif->atapi_dma == 0)
return 0;
for (i = 0; i < ARRAY_SIZE(xfer_mode_bases); i++) {
mask = ide_get_mode_mask(drive, xfer_mode_bases[i]);
x = fls(mask) - 1;
if (x >= 0) {
mode = xfer_mode_bases[i] + x;
break;
}
}
printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode);
return mode;
}
EXPORT_SYMBOL_GPL(ide_max_dma_mode);
void ide_dma_verbose(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
......
......@@ -592,8 +592,6 @@ u8 eighty_ninty_three (ide_drive_t *drive)
return 1;
}
EXPORT_SYMBOL(eighty_ninty_three);
int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
{
if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) &&
......
......@@ -69,123 +69,34 @@ char *ide_xfer_verbose (u8 xfer_rate)
EXPORT_SYMBOL(ide_xfer_verbose);
/**
* ide_dma_speed - compute DMA speed
* @drive: drive
* @mode: modes available
*
* Checks the drive capabilities and returns the speed to use
* for the DMA transfer. Returns 0 if the drive is incapable
* of DMA transfers.
*/
u8 ide_dma_speed(ide_drive_t *drive, u8 mode)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = HWIF(drive);
u8 ultra_mask, mwdma_mask, swdma_mask;
u8 speed = 0;
if (drive->media != ide_disk && hwif->atapi_dma == 0)
return 0;
/* Capable of UltraDMA modes? */
ultra_mask = id->dma_ultra & hwif->ultra_mask;
if (!(id->field_valid & 4))
mode = 0; /* fallback to MW/SW DMA if no UltraDMA */
switch (mode) {
case 4:
if (ultra_mask & 0x40) {
speed = XFER_UDMA_6;
break;
}
case 3:
if (ultra_mask & 0x20) {
speed = XFER_UDMA_5;
break;
}
case 2:
if (ultra_mask & 0x10) {
speed = XFER_UDMA_4;
break;
}
if (ultra_mask & 0x08) {
speed = XFER_UDMA_3;
break;
}
case 1:
if (ultra_mask & 0x04) {
speed = XFER_UDMA_2;
break;
}
if (ultra_mask & 0x02) {
speed = XFER_UDMA_1;
break;
}
if (ultra_mask & 0x01) {
speed = XFER_UDMA_0;
break;
}
case 0:
mwdma_mask = id->dma_mword & hwif->mwdma_mask;
if (mwdma_mask & 0x04) {
speed = XFER_MW_DMA_2;
break;
}
if (mwdma_mask & 0x02) {
speed = XFER_MW_DMA_1;
break;
}
if (mwdma_mask & 0x01) {
speed = XFER_MW_DMA_0;
break;
}
swdma_mask = id->dma_1word & hwif->swdma_mask;
if (swdma_mask & 0x04) {
speed = XFER_SW_DMA_2;
break;
}
if (swdma_mask & 0x02) {
speed = XFER_SW_DMA_1;
break;
}
if (swdma_mask & 0x01) {
speed = XFER_SW_DMA_0;
break;
}
}
return speed;
}
EXPORT_SYMBOL(ide_dma_speed);
/**
* ide_rate_filter - return best speed for mode
* @mode: modes available
* ide_rate_filter - filter transfer mode
* @drive: IDE device
* @speed: desired speed
*
* Given the available DMA/UDMA mode this function returns
* Given the available transfer modes this function returns
* the best available speed at or below the speed requested.
*
* FIXME: filter also PIO/SWDMA/MWDMA modes
*/
u8 ide_rate_filter (u8 mode, u8 speed)
u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
{
#ifdef CONFIG_BLK_DEV_IDEDMA
static u8 speed_max[] = {
XFER_MW_DMA_2, XFER_UDMA_2, XFER_UDMA_4,
XFER_UDMA_5, XFER_UDMA_6
};
ide_hwif_t *hwif = drive->hwif;
u8 mask = hwif->ultra_mask, mode = XFER_MW_DMA_2;
if (hwif->udma_filter)
mask = hwif->udma_filter(drive);
if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
mask &= 0x07;
if (mask)
mode = fls(mask) - 1 + XFER_UDMA_0;
// printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed);
/* So that we remember to update this if new modes appear */
BUG_ON(mode > 4);
return min(speed, speed_max[mode]);
return min(speed, mode);
#else /* !CONFIG_BLK_DEV_IDEDMA */
return min(speed, (u8)XFER_PIO_4);
#endif /* CONFIG_BLK_DEV_IDEDMA */
......
......@@ -477,6 +477,7 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->tuneproc = tmp_hwif->tuneproc;
hwif->speedproc = tmp_hwif->speedproc;
hwif->udma_filter = tmp_hwif->udma_filter;
hwif->selectproc = tmp_hwif->selectproc;
hwif->reset_poll = tmp_hwif->reset_poll;
hwif->pre_reset = tmp_hwif->pre_reset;
......
......@@ -87,38 +87,12 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
return chipset_table->ultra_settings;
}
static u8 aec62xx_ratemask (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 mode;
switch(hwif->pci_dev->device) {
case PCI_DEVICE_ID_ARTOP_ATP865:
case PCI_DEVICE_ID_ARTOP_ATP865R:
mode = (inb(hwif->channel ?
hwif->mate->dma_status :
hwif->dma_status) & 0x10) ? 4 : 3;
break;
case PCI_DEVICE_ID_ARTOP_ATP860:
case PCI_DEVICE_ID_ARTOP_ATP860R:
mode = 2;
break;
case PCI_DEVICE_ID_ARTOP_ATP850UF:
default:
return 1;
}
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u16 d_conf = 0;
u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
u8 ultra = 0, ultra_conf = 0;
u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
unsigned long flags;
......@@ -145,7 +119,7 @@ static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 speed = ide_rate_filter(aec62xx_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
u8 unit = (drive->select.b.unit & 0x01);
u8 tmp1 = 0, tmp2 = 0;
u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
......@@ -183,7 +157,7 @@ static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed)
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, aec62xx_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!(speed))
return 0;
......
......@@ -378,74 +378,31 @@ static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
}
/**
* ali15x3_can_ultra - check for ultra DMA support
* @drive: drive to do the check
* ali_udma_filter - compute UDMA mask
* @drive: IDE device
*
* Check the drive and controller revisions. Return 0 if UDMA is
* not available, or 1 if UDMA can be used. The actual rules for
* the ALi are
* Return available UDMA modes.
*
* The actual rules for the ALi are:
* No UDMA on revisions <= 0x20
* Disk only for revisions < 0xC2
* Not WDC drives for revisions < 0xC2
*
* FIXME: WDC ifdef needs to die
*/
static u8 ali15x3_can_ultra (ide_drive_t *drive)
{
#ifndef CONFIG_WDC_ALI15X3
struct hd_driveid *id = drive->id;
#endif /* CONFIG_WDC_ALI15X3 */
if (m5229_revision <= 0x20) {
return 0;
} else if ((m5229_revision < 0xC2) &&
#ifndef CONFIG_WDC_ALI15X3
((chip_is_1543c_e && strstr(id->model, "WDC ")) ||
(drive->media!=ide_disk))) {
#else /* CONFIG_WDC_ALI15X3 */
(drive->media!=ide_disk)) {
#endif /* CONFIG_WDC_ALI15X3 */
return 0;
} else {
return 1;
}
}
/**
* ali15x3_ratemask - generate DMA mode list
* @drive: drive to compute against
*
* Generate a list of the available DMA modes for the drive.
* FIXME: this function contains lots of bogus masking we can dump
*
* Return the highest available mode (UDMA33, UDMA66, UDMA100,..)
*/
static u8 ali15x3_ratemask (ide_drive_t *drive)
static u8 ali_udma_filter(ide_drive_t *drive)
{
u8 mode = 0, can_ultra = ali15x3_can_ultra(drive);
if (m5229_revision > 0xC4 && can_ultra) {
mode = 4;
} else if (m5229_revision == 0xC4 && can_ultra) {
mode = 3;
} else if (m5229_revision >= 0xC2 && can_ultra) {
mode = 2;
} else if (can_ultra) {
return 1;
} else {
return 0;
if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
if (drive->media != ide_disk)
return 0;
#ifndef CONFIG_WDC_ALI15X3
if (chip_is_1543c_e && strstr(drive->id->model, "WDC "))
return 0;
#endif
}
/*
* If the drive sees no suitable cable then UDMA 33
* is the highest permitted mode
*/
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
return drive->hwif->ultra_mask;
}
/**
......@@ -461,7 +418,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 speed = ide_rate_filter(ali15x3_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
u8 speed1 = speed;
u8 unit = (drive->select.b.unit & 0x01);
u8 tmpbyte = 0x00;
......@@ -511,7 +468,7 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, ali15x3_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!(speed))
return 0;
......@@ -771,6 +728,7 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->tuneproc = &ali15x3_tune_drive;
hwif->speedproc = &ali15x3_tune_chipset;
hwif->udma_filter = &ali_udma_filter;
/* don't use LBA48 DMA on ALi devices before rev 0xC5 */
hwif->no_lba48_dma = (m5229_revision <= 0xC4) ? 1 : 0;
......
......@@ -48,22 +48,6 @@ static int save_mdma_mode[4];
static DEFINE_SPINLOCK(atiixp_lock);
/**
* atiixp_ratemask - compute rate mask for ATIIXP IDE
* @drive: IDE drive to compute for
*
* Returns the available modes for the ATIIXP IDE controller.
*/
static u8 atiixp_ratemask(ide_drive_t *drive)
{
u8 mode = 3;
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
/**
* atiixp_dma_2_pio - return the PIO mode matching DMA
* @xfer_rate: transfer speed
......@@ -189,7 +173,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
u16 tmp16;
u8 speed, pio;
speed = ide_rate_filter(atiixp_ratemask(drive), xferspeed);
speed = ide_rate_filter(drive, xferspeed);
spin_lock_irqsave(&atiixp_lock, flags);
......@@ -233,7 +217,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
static int atiixp_config_drive_for_dma(ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, atiixp_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......
......@@ -292,55 +292,6 @@ static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static u8 cmd64x_ratemask (ide_drive_t *drive)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 mode = 0;
switch(dev->device) {
case PCI_DEVICE_ID_CMD_649:
mode = 3;
break;
case PCI_DEVICE_ID_CMD_648:
mode = 2;
break;
case PCI_DEVICE_ID_CMD_643:
return 0;
case PCI_DEVICE_ID_CMD_646:
{
unsigned int class_rev = 0;
pci_read_config_dword(dev,
PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
/*
* UltraDMA only supported on PCI646U and PCI646U2, which
* correspond to revisions 0x03, 0x05 and 0x07 respectively.
* Actually, although the CMD tech support people won't
* tell me the details, the 0x03 revision cannot support
* UDMA correctly without hardware modifications, and even
* then it only works with Quantum disks due to some
* hold time assumptions in the 646U part which are fixed
* in the 646U2.
*
* So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
*/
switch(class_rev) {
case 0x07:
case 0x05:
return 1;
case 0x03:
case 0x01:
default:
return 0;
}
}
}
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
......@@ -348,7 +299,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed)
u8 unit = drive->dn & 0x01;
u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
speed = ide_rate_filter(cmd64x_ratemask(drive), speed);
speed = ide_rate_filter(drive, speed);
if (speed >= XFER_SW_DMA_0) {
(void) pci_read_config_byte(dev, pciU, &regU);
......@@ -403,7 +354,7 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed)
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, cmd64x_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......@@ -646,6 +597,18 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
hwif->ultra_mask = hwif->cds->udma_mask;
/*
* UltraDMA only supported on PCI646U and PCI646U2, which
* correspond to revisions 0x03, 0x05 and 0x07 respectively.
* Actually, although the CMD tech support people won't
* tell me the details, the 0x03 revision cannot support
* UDMA correctly without hardware modifications, and even
* then it only works with Quantum disks due to some
* hold time assumptions in the 646U part which are fixed
* in the 646U2.
*
* So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
*/
if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5)
hwif->ultra_mask = 0x00;
......
......@@ -127,20 +127,6 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
}
}
static u8 cs5535_ratemask(ide_drive_t *drive)
{
/* eighty93 will return 1 if it's 80core and capable of
exceeding udma2, 0 otherwise. we need ratemask to set
the max speed and if we can > udma2 then we return 2
which selects speed_max as udma4 which is the 5535's max
speed, and 1 selects udma2 which is the max for 40c */
if (!eighty_ninty_three(drive))
return 1;
return 2;
}
/****
* cs5535_set_drive - Configure the drive to the new speed
* @drive: Drive to set up
......@@ -151,7 +137,7 @@ static u8 cs5535_ratemask(ide_drive_t *drive)
*/
static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
{
speed = ide_rate_filter(cs5535_ratemask(drive), speed);
speed = ide_rate_filter(drive, speed);
ide_config_drive_speed(drive, speed);
cs5535_set_speed(drive, speed);
......@@ -180,9 +166,7 @@ static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed)
static int cs5535_config_drive_for_dma(ide_drive_t *drive)
{
u8 speed;
speed = ide_dma_speed(drive, cs5535_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
/* If no DMA speed was available then let dma_check hit pio */
if (!speed) {
......
......@@ -43,15 +43,10 @@
#define HPT343_DEBUG_DRIVE_INFO 0
static u8 hpt34x_ratemask (ide_drive_t *drive)
{
return 1;
}
static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 speed = ide_rate_filter(hpt34x_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
u8 hi_speed, lo_speed;
......@@ -98,7 +93,7 @@ static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, hpt34x_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!(speed))
return 0;
......
......@@ -514,43 +514,31 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
return 0;
}
static u8 hpt3xx_ratemask(ide_drive_t *drive)
{
struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev);
u8 mode = info->max_mode;
if (!eighty_ninty_three(drive) && mode)
mode = min(mode, (u8)1);
return mode;
}
/*
* Note for the future; the SATA hpt37x we must set
* either PIO or UDMA modes 0,4,5
*/
static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed)
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev);
u8 chip_type = info->chip_type;
u8 mode = hpt3xx_ratemask(drive);
if (drive->media != ide_disk)
return min(speed, (u8)XFER_PIO_4);
u8 mode = info->max_mode;
u8 mask;
switch (mode) {
case 0x04:
speed = min_t(u8, speed, XFER_UDMA_6);
mask = 0x7f;
break;
case 0x03:
speed = min_t(u8, speed, XFER_UDMA_5);
mask = 0x3f;
if (chip_type >= HPT374)
break;
if (!check_in_drive_list(drive, bad_ata100_5))
goto check_bad_ata33;
/* fall thru */
case 0x02:
speed = min_t(u8, speed, XFER_UDMA_4);
mask = 0x1f;
/*
* CHECK ME, Does this need to be changed to HPT374 ??
......@@ -561,13 +549,13 @@ static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed)
!check_in_drive_list(drive, bad_ata66_4))
goto check_bad_ata33;
speed = min_t(u8, speed, XFER_UDMA_3);
mask = 0x0f;
if (HPT366_ALLOW_ATA66_3 &&
!check_in_drive_list(drive, bad_ata66_3))
goto check_bad_ata33;
/* fall thru */
case 0x01:
speed = min_t(u8, speed, XFER_UDMA_2);
mask = 0x07;
check_bad_ata33:
if (chip_type >= HPT370A)
......@@ -577,10 +565,10 @@ static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed)
/* fall thru */
case 0x00:
default:
speed = min_t(u8, speed, XFER_MW_DMA_2);
mask = 0x00;
break;
}
return speed;
return mask;
}
static u32 get_speed_setting(u8 speed, struct hpt_info *info)
......@@ -608,12 +596,19 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct hpt_info *info = pci_get_drvdata(dev);
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
u8 itr_addr = drive->dn ? 0x44 : 0x40;
u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 :
(speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff);
u32 new_itr = get_speed_setting(speed, info);
u32 old_itr = 0;
u32 itr_mask, new_itr;
/* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */
if (drive->media != ide_disk)
speed = min_t(u8, speed, XFER_PIO_4);
itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 :
(speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff);
new_itr = get_speed_setting(speed, info);
/*
* Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
......@@ -633,12 +628,19 @@ static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct hpt_info *info = pci_get_drvdata(dev);
u8 speed = hpt3xx_ratefilter(drive, xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 :
(speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff);
u32 new_itr = get_speed_setting(speed, info);
u32 old_itr = 0;
u32 itr_mask, new_itr;
/* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */
if (drive->media != ide_disk)
speed = min_t(u8, speed, XFER_PIO_4);
itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 :
(speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff);
new_itr = get_speed_setting(speed, info);
pci_read_config_dword(dev, itr_addr, &old_itr);
new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
......@@ -676,7 +678,7 @@ static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
*/
static int config_chipset_for_dma(ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, hpt3xx_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......@@ -1271,6 +1273,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
hwif->intrproc = &hpt3xx_intrproc;
hwif->maskproc = &hpt3xx_maskproc;
hwif->busproc = &hpt3xx_busproc;
hwif->udma_filter = &hpt3xx_udma_filter;
/*
* HPT3xxN chips have some complications:
......
......@@ -17,22 +17,6 @@
#include <asm/io.h>
/*
* it8213_ratemask - Compute available modes
* @drive: IDE drive
*
* Compute the available speeds for the devices on the interface. This
* is all modes to ATA133 clipped by drive cable setup.
*/
static u8 it8213_ratemask (ide_drive_t *drive)
{
u8 mode = 4;
if (!eighty_ninty_three(drive))
mode = min_t(u8, mode, 1);
return mode;
}
/**
* it8213_dma_2_pio - return the PIO mode matching DMA
* @xfer_rate: transfer speed
......@@ -145,7 +129,7 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 maslave = 0x40;
u8 speed = ide_rate_filter(it8213_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
int v_flag = 0x01 << drive->dn;
......@@ -222,7 +206,7 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, it8213_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......
......@@ -228,22 +228,6 @@ static void it821x_clock_strategy(ide_drive_t *drive)
}
}
/**
* it821x_ratemask - Compute available modes
* @drive: IDE drive
*
* Compute the available speeds for the devices on the interface. This
* is all modes to ATA133 clipped by drive cable setup.
*/
static u8 it821x_ratemask (ide_drive_t *drive)
{
u8 mode = 4;
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
/**
* it821x_tunepio - tune a drive
* @drive: drive to tune
......@@ -438,7 +422,7 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed)
ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
u8 speed = ide_rate_filter(it821x_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
switch (speed) {
case XFER_PIO_4:
......@@ -488,7 +472,7 @@ static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed)
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, it821x_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (speed == 0)
return 0;
......
......@@ -21,22 +21,6 @@ typedef enum {
PORT_SATA = 2,
} port_type;
/**
* jmicron_ratemask - Compute available modes
* @drive: IDE drive
*
* Compute the available speeds for the devices on the interface. This
* is all modes to ATA133 clipped by drive cable setup.
*/
static u8 jmicron_ratemask(ide_drive_t *drive)
{
u8 mode = 4;
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
/**
* ata66_jmicron - Cable check
* @hwif: IDE port
......@@ -129,8 +113,7 @@ static void config_jmicron_chipset_for_pio (ide_drive_t *drive, byte set_speed)
static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed)
{
u8 speed = ide_rate_filter(jmicron_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
return ide_config_drive_speed(drive, speed);
}
......@@ -145,7 +128,7 @@ static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed)
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, jmicron_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......
......@@ -82,16 +82,6 @@ static u8 max_dma_rate(struct pci_dev *pdev)
return mode;
}
static u8 pdcnew_ratemask(ide_drive_t *drive)
{
u8 mode = max_dma_rate(HWIF(drive)->pci_dev);
if (!eighty_ninty_three(drive))
mode = min_t(u8, mode, 1);
return mode;
}
/**
* get_indexed_reg - Get indexed register
* @hwif: for the port address
......@@ -164,7 +154,7 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
int err;
speed = ide_rate_filter(pdcnew_ratemask(drive), speed);
speed = ide_rate_filter(drive, speed);
/*
* Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will
......@@ -267,7 +257,7 @@ static int config_chipset_for_dma(ide_drive_t *drive)
set_indexed_reg(hwif, 0x13 + adj, tmp | 0x03);
}
speed = ide_dma_speed(drive, pdcnew_ratemask(drive));
speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......
......@@ -101,35 +101,12 @@ static const char *pdc_quirk_drives[] = {
#define MC1 0x02 /* DMA"C" timing */
#define MC0 0x01 /* DMA"C" timing */
static u8 pdc202xx_ratemask (ide_drive_t *drive)
{
u8 mode;
switch(HWIF(drive)->pci_dev->device) {
case PCI_DEVICE_ID_PROMISE_20267:
case PCI_DEVICE_ID_PROMISE_20265:
mode = 3;
break;
case PCI_DEVICE_ID_PROMISE_20263:
case PCI_DEVICE_ID_PROMISE_20262:
mode = 2;
break;
case PCI_DEVICE_ID_PROMISE_20246:
return 1;
default:
return 0;
}
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 drive_pci = 0x60 + (drive->dn << 2);
u8 speed = ide_rate_filter(pdc202xx_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
u32 drive_conf;
u8 AP, BP, CP, DP;
......@@ -308,7 +285,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
if (drive->media == ide_disk) /* PREFETCH_EN */
pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN);
speed = ide_dma_speed(drive, pdc202xx_ratemask(drive));
speed = ide_max_dma_mode(drive);
if (!(speed)) {
/* restore original pci-config space */
......
......@@ -105,68 +105,6 @@
static int no_piix_dma;
/**
* piix_ratemask - compute rate mask for PIIX IDE
* @drive: IDE drive to compute for
*
* Returns the available modes for the PIIX IDE controller.
*/
static u8 piix_ratemask (ide_drive_t *drive)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 mode;
switch(dev->device) {
case PCI_DEVICE_ID_INTEL_82801EB_1:
mode = 3;
break;
/* UDMA 100 capable */
case PCI_DEVICE_ID_INTEL_82801BA_8:
case PCI_DEVICE_ID_INTEL_82801BA_9:
case PCI_DEVICE_ID_INTEL_82801CA_10:
case PCI_DEVICE_ID_INTEL_82801CA_11:
case PCI_DEVICE_ID_INTEL_82801E_11:
case PCI_DEVICE_ID_INTEL_82801DB_1:
case PCI_DEVICE_ID_INTEL_82801DB_10:
case PCI_DEVICE_ID_INTEL_82801DB_11:
case PCI_DEVICE_ID_INTEL_82801EB_11:
case PCI_DEVICE_ID_INTEL_ESB_2:
case PCI_DEVICE_ID_INTEL_ICH6_19:
case PCI_DEVICE_ID_INTEL_ICH7_21:
case PCI_DEVICE_ID_INTEL_ESB2_18:
case PCI_DEVICE_ID_INTEL_ICH8_6:
mode = 3;
break;
/* UDMA 66 capable */
case PCI_DEVICE_ID_INTEL_82801AA_1:
case PCI_DEVICE_ID_INTEL_82372FB_1:
mode = 2;
break;
/* UDMA 33 capable */
case PCI_DEVICE_ID_INTEL_82371AB:
case PCI_DEVICE_ID_INTEL_82443MX_1:
case PCI_DEVICE_ID_INTEL_82451NX:
case PCI_DEVICE_ID_INTEL_82801AB_1:
return 1;
/* Non UDMA capable (MWDMA2) */
case PCI_DEVICE_ID_INTEL_82371SB_1:
case PCI_DEVICE_ID_INTEL_82371FB_1:
case PCI_DEVICE_ID_INTEL_82371FB_0:
case PCI_DEVICE_ID_INTEL_82371MX:
default:
return 0;
}
/*
* If we are UDMA66 capable fall back to UDMA33
* if the drive cannot see an 80pin cable.
*/
if (!eighty_ninty_three(drive))
mode = min_t(u8, mode, 1);
return mode;
}
/**
* piix_dma_2_pio - return the PIO mode matching DMA
* @xfer_rate: transfer speed
......@@ -301,7 +239,7 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 maslave = hwif->channel ? 0x42 : 0x40;
u8 speed = ide_rate_filter(piix_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
int v_flag = 0x01 << drive->dn;
......@@ -376,7 +314,7 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int piix_config_drive_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, piix_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
/*
* If no DMA speed was available or the chipset has DMA bugs
......
......@@ -189,23 +189,6 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count)
}
}
/**
* scc_ratemask - Compute available modes
* @drive: IDE drive
*
* Compute the available speeds for the devices on the interface.
* Enforce UDMA33 as a limit if there is no 80pin cable present.
*/
static u8 scc_ratemask(ide_drive_t *drive)
{
u8 mode = 4;
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
/**
* scc_tuneproc - tune a drive PIO mode
* @drive: drive to tune
......@@ -273,7 +256,7 @@ static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
{
ide_hwif_t *hwif = HWIF(drive);
u8 speed = ide_rate_filter(scc_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
struct scc_ports *ports = ide_get_hwifdata(hwif);
unsigned long ctl_base = ports->ctl;
unsigned long cckctrl_port = ctl_base + 0xff0;
......@@ -347,7 +330,7 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
static int scc_config_chipset_for_dma(ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, scc_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......
......@@ -65,16 +65,16 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list)
return 0;
}
static u8 svwks_ratemask (ide_drive_t *drive)
static u8 svwks_udma_filter(ide_drive_t *drive)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 mode = 0;
u8 mask = 0;
if (!svwks_revision)
pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
return 2;
return 0x1f;
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
u32 reg = 0;
if (isa_dev)
......@@ -86,25 +86,31 @@ static u8 svwks_ratemask (ide_drive_t *drive)
if(drive->media == ide_disk)
return 0;
/* Check the OSB4 DMA33 enable bit */
return ((reg & 0x00004000) == 0x00004000) ? 1 : 0;
return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0;
} else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) {
return 1;
return 0x07;
} else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) {
u8 btr = 0;
u8 btr = 0, mode;
pci_read_config_byte(dev, 0x5A, &btr);
mode = btr & 0x3;
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
/* If someone decides to do UDMA133 on CSB5 the same
issue will bite so be inclusive */
if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100))
mode = 2;
switch(mode) {
case 2: mask = 0x1f; break;
case 1: mask = 0x07; break;
default: mask = 0x00; break;
}
}
if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
(dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) &&
(!(PCI_FUNC(dev->devfn) & 1)))
mode = 2;
return mode;
mask = 0x1f;
return mask;
}
static u8 svwks_csb_check (struct pci_dev *dev)
......@@ -141,7 +147,7 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
if (xferspeed == 255) /* PIO auto-tuning */
speed = XFER_PIO_0 + pio;
else
speed = ide_rate_filter(svwks_ratemask(drive), xferspeed);
speed = ide_rate_filter(drive, xferspeed);
/* If we are about to put a disk into UDMA mode we screwed up.
Our code assumes we never _ever_ do this on an OSB4 */
......@@ -304,7 +310,7 @@ static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, svwks_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!(speed))
speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
......@@ -500,6 +506,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
hwif->tuneproc = &svwks_tune_drive;
hwif->speedproc = &svwks_tune_chipset;
hwif->udma_filter = &svwks_udma_filter;
hwif->atapi_dma = 1;
......
......@@ -122,45 +122,41 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
}
/**
* siimage_ratemask - Compute available modes
* @drive: IDE drive
* sil_udma_filter - compute UDMA mask
* @drive: IDE device
*
* Compute the available UDMA speeds for the device on the interface.
*
* Compute the available speeds for the devices on the interface.
* For the CMD680 this depends on the clocking mode (scsc), for the
* SI3312 SATA controller life is a bit simpler. Enforce UDMA33
* as a limit if there is no 80pin cable present.
* SI3112 SATA controller life is a bit simpler.
*/
static byte siimage_ratemask (ide_drive_t *drive)
static u8 sil_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 mode = 0, scsc = 0;
ide_hwif_t *hwif = drive->hwif;
unsigned long base = (unsigned long) hwif->hwif_data;
u8 mask = 0, scsc = 0;
if (hwif->mmio)
scsc = hwif->INB(base + 0x4A);
else
pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
if(is_sata(hwif))
{
if(strstr(drive->id->model, "Maxtor"))
return 3;
return 4;
if (is_sata(hwif)) {
mask = strstr(drive->id->model, "Maxtor") ? 0x3f : 0x7f;
goto out;
}
if ((scsc & 0x30) == 0x10) /* 133 */
mode = 4;
mask = 0x7f;
else if ((scsc & 0x30) == 0x20) /* 2xPCI */
mode = 4;
mask = 0x7f;
else if ((scsc & 0x30) == 0x00) /* 100 */
mode = 3;
mask = 0x3f;
else /* Disabled ? */
BUG();
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
out:
return mask;
}
/**
......@@ -306,7 +302,7 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
ide_hwif_t *hwif = HWIF(drive);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
u8 speed = ide_rate_filter(siimage_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 scsc = 0, addr_mask = ((hwif->channel) ?
((hwif->mmio) ? 0xF4 : 0x84) :
......@@ -389,7 +385,7 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, siimage_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......@@ -989,6 +985,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
hwif->tuneproc = &siimage_tuneproc;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
hwif->udma_filter = &sil_udma_filter;
if(is_sata(hwif)) {
static int first = 1;
......
......@@ -428,16 +428,6 @@ static int sis_get_info (char *buffer, char **addr, off_t offset, int count)
}
#endif /* defined(DISPLAY_SIS_TIMINGS) && defined(CONFIG_PROC_FS) */
static u8 sis5513_ratemask (ide_drive_t *drive)
{
u8 rates[] = { 0, 0, 1, 2, 3, 3, 4, 4 };
u8 mode = rates[chipset_family];
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
/*
* Configuration functions
*/
......@@ -563,7 +553,7 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
u8 drive_pci, reg, speed;
u32 regdw;
speed = ide_rate_filter(sis5513_ratemask(drive), xferspeed);
speed = ide_rate_filter(drive, xferspeed);
/* See config_art_rwp_pio for drive pci config registers */
drive_pci = 0x40;
......@@ -653,7 +643,7 @@ static void sis5513_tune_drive (ide_drive_t *drive, u8 pio)
*/
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, sis5513_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
#ifdef DEBUG
printk("SIS5513: config_chipset_for_dma, drive %d, ultra %x\n",
......
......@@ -21,15 +21,6 @@
#include <asm/io.h>
static u8 slc90e66_ratemask (ide_drive_t *drive)
{
u8 mode = 2;
if (!eighty_ninty_three(drive))
mode = min_t(u8, mode, 1);
return mode;
}
static u8 slc90e66_dma_2_pio (u8 xfer_rate) {
switch(xfer_rate) {
case XFER_UDMA_4:
......@@ -122,7 +113,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 maslave = hwif->channel ? 0x42 : 0x40;
u8 speed = ide_rate_filter(slc90e66_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
int sitre = 0, a_speed = 7 << (drive->dn * 4);
int u_speed = 0, u_flag = 1 << drive->dn;
u16 reg4042, reg44, reg48, reg4a;
......@@ -171,7 +162,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
static int slc90e66_config_drive_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, slc90e66_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......
......@@ -13,18 +13,13 @@
#include <linux/pci.h>
#include <linux/ide.h>
static inline u8 tc86c001_ratemask(ide_drive_t *drive)
{
return eighty_ninty_three(drive) ? 2 : 1;
}
static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
u16 mode, scr = hwif->INW(scr_port);
speed = ide_rate_filter(tc86c001_ratemask(drive), speed);
speed = ide_rate_filter(drive, speed);
switch (speed) {
case XFER_UDMA_4: mode = 0x00c0; break;
......@@ -174,7 +169,7 @@ static int tc86c001_busproc(ide_drive_t *drive, int state)
static int config_chipset_for_dma(ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, tc86c001_ratemask(drive));
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......
......@@ -48,7 +48,7 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed)
u16 timing = 0;
u32 triflex_timings = 0;
u8 unit = (drive->select.b.unit & 0x01);
u8 speed = ide_rate_filter(0, xferspeed);
u8 speed = ide_rate_filter(drive, xferspeed);
pci_read_config_dword(dev, channel_offset, &triflex_timings);
......@@ -102,7 +102,7 @@ static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
static int triflex_config_drive_for_dma(ide_drive_t *drive)
{
int speed = ide_dma_speed(drive, 0); /* No ultra speeds */
u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
......
......@@ -717,11 +717,8 @@ typedef struct hwif_s {
int (*quirkproc)(ide_drive_t *);
/* driver soft-power interface */
int (*busproc)(ide_drive_t *, int);
// /* host rate limiter */
// u8 (*ratemask)(ide_drive_t *);
// /* device rate limiter */
// u8 (*ratefilter)(ide_drive_t *, u8);
#endif
u8 (*udma_filter)(ide_drive_t *);
void (*ata_input_data)(ide_drive_t *, void *, u32);
void (*ata_output_data)(ide_drive_t *, void *, u32);
......@@ -1279,6 +1276,7 @@ int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
int __ide_dma_bad_drive(ide_drive_t *);
int __ide_dma_good_drive(ide_drive_t *);
int ide_use_dma(ide_drive_t *);
u8 ide_max_dma_mode(ide_drive_t *);
void ide_dma_off(ide_drive_t *);
void ide_dma_verbose(ide_drive_t *);
int ide_set_dma(ide_drive_t *);
......@@ -1305,6 +1303,7 @@ extern int __ide_dma_timeout(ide_drive_t *);
#else
static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
static inline void ide_dma_off(ide_drive_t *drive) { ; }
static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
......@@ -1349,8 +1348,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
}
/* ide-lib.c */
extern u8 ide_dma_speed(ide_drive_t *drive, u8 mode);
extern u8 ide_rate_filter(u8 mode, u8 speed);
u8 ide_rate_filter(ide_drive_t *, u8);
extern int ide_dma_enable(ide_drive_t *drive);
extern char *ide_xfer_verbose(u8 xfer_rate);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment