Commit 2d91fdcc authored by Ji-Ze Hong (Peter Hong)'s avatar Ji-Ze Hong (Peter Hong) Committed by Marc Kleine-Budde

can: sja1000: f81601: add Fintek F81601 support

This patch add support for Fintek PCIE to 2 CAN controller support
Signed-off-by: default avatarJi-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent 4dfc39e1
......@@ -21,6 +21,16 @@ config CAN_EMS_PCMCIA
This driver is for the one or two channel CPC-CARD cards from
EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
config CAN_F81601
tristate "Fintek F81601 PCIE to 2 CAN Controller"
depends on PCI
help
This driver adds support for Fintek F81601 PCIE to 2 CAN
Controller. It had internal 24MHz clock source, but it can
be changed by manufacturer. Use modinfo to get usage for
parameters. Visit http://www.fintek.com.tw to get more
information.
config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI
......
......@@ -5,6 +5,7 @@
obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
obj-$(CONFIG_CAN_F81601) += f81601.o
obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
obj-$(CONFIG_CAN_PEAK_PCMCIA) += peak_pcmcia.o
......
// SPDX-License-Identifier: GPL-2.0
/* Fintek F81601 PCIE to 2 CAN controller driver
*
* Copyright (C) 2019 Peter Hong <peter_hong@fintek.com.tw>
* Copyright (C) 2019 Linux Foundation
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/can/dev.h>
#include <linux/io.h>
#include <linux/version.h>
#include "sja1000.h"
#define F81601_PCI_MAX_CHAN 2
#define F81601_DECODE_REG 0x209
#define F81601_IO_MODE BIT(7)
#define F81601_MEM_MODE BIT(6)
#define F81601_CFG_MODE BIT(5)
#define F81601_CAN2_INTERNAL_CLK BIT(3)
#define F81601_CAN1_INTERNAL_CLK BIT(2)
#define F81601_CAN2_EN BIT(1)
#define F81601_CAN1_EN BIT(0)
#define F81601_TRAP_REG 0x20a
#define F81601_CAN2_HAS_EN BIT(4)
struct f81601_pci_card {
void __iomem *addr;
spinlock_t lock; /* use this spin lock only for write access */
struct pci_dev *dev;
struct net_device *net_dev[F81601_PCI_MAX_CHAN];
};
static const struct pci_device_id f81601_pci_tbl[] = {
{ PCI_DEVICE(0x1c29, 0x1703) },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(pci, f81601_pci_tbl);
static bool internal_clk = true;
module_param(internal_clk, bool, 0444);
MODULE_PARM_DESC(internal_clk, "Use internal clock, default true (24MHz)");
static unsigned int external_clk;
module_param(external_clk, uint, 0444);
MODULE_PARM_DESC(external_clk, "External clock when internal_clk disabled");
static u8 f81601_pci_read_reg(const struct sja1000_priv *priv, int port)
{
return readb(priv->reg_base + port);
}
static void f81601_pci_write_reg(const struct sja1000_priv *priv, int port,
u8 val)
{
struct f81601_pci_card *card = priv->priv;
unsigned long flags;
spin_lock_irqsave(&card->lock, flags);
writeb(val, priv->reg_base + port);
readb(priv->reg_base);
spin_unlock_irqrestore(&card->lock, flags);
}
static void f81601_pci_remove(struct pci_dev *pdev)
{
struct f81601_pci_card *card = pci_get_drvdata(pdev);
struct net_device *dev;
int i;
for (i = 0; i < ARRAY_SIZE(card->net_dev); i++) {
dev = card->net_dev[i];
if (!dev)
continue;
dev_info(&pdev->dev, "%s: Removing %s\n", __func__, dev->name);
unregister_sja1000dev(dev);
free_sja1000dev(dev);
}
}
/* Probe F81601 based device for the SJA1000 chips and register each
* available CAN channel to SJA1000 Socket-CAN subsystem.
*/
static int f81601_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct sja1000_priv *priv;
struct net_device *dev;
struct f81601_pci_card *card;
int err, i, count;
u8 tmp;
if (pcim_enable_device(pdev) < 0) {
dev_err(&pdev->dev, "Failed to enable PCI device\n");
return -ENODEV;
}
dev_info(&pdev->dev, "Detected card at slot #%i\n",
PCI_SLOT(pdev->devfn));
card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
if (!card)
return -ENOMEM;
card->dev = pdev;
spin_lock_init(&card->lock);
pci_set_drvdata(pdev, card);
tmp = F81601_IO_MODE | F81601_MEM_MODE | F81601_CFG_MODE |
F81601_CAN2_EN | F81601_CAN1_EN;
if (internal_clk) {
tmp |= F81601_CAN2_INTERNAL_CLK | F81601_CAN1_INTERNAL_CLK;
dev_info(&pdev->dev,
"F81601 running with internal clock: 24Mhz\n");
} else {
dev_info(&pdev->dev,
"F81601 running with external clock: %dMhz\n",
external_clk / 1000000);
}
pci_write_config_byte(pdev, F81601_DECODE_REG, tmp);
card->addr = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
if (!card->addr) {
err = -ENOMEM;
dev_err(&pdev->dev, "%s: Failed to remap BAR\n", __func__);
goto failure_cleanup;
}
/* read CAN2_HW_EN strap pin to detect how many CANBUS do we have */
count = ARRAY_SIZE(card->net_dev);
pci_read_config_byte(pdev, F81601_TRAP_REG, &tmp);
if (!(tmp & F81601_CAN2_HAS_EN))
count = 1;
for (i = 0; i < count; i++) {
dev = alloc_sja1000dev(0);
if (!dev) {
err = -ENOMEM;
goto failure_cleanup;
}
priv = netdev_priv(dev);
priv->priv = card;
priv->irq_flags = IRQF_SHARED;
priv->reg_base = card->addr + 0x80 * i;
priv->read_reg = f81601_pci_read_reg;
priv->write_reg = f81601_pci_write_reg;
if (internal_clk)
priv->can.clock.freq = 24000000 / 2;
else
priv->can.clock.freq = external_clk / 2;
priv->ocr = OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL;
priv->cdr = CDR_CBP;
SET_NETDEV_DEV(dev, &pdev->dev);
dev->dev_id = i;
dev->irq = pdev->irq;
/* Register SJA1000 device */
err = register_sja1000dev(dev);
if (err) {
dev_err(&pdev->dev,
"%s: Registering device failed: %x\n", __func__,
err);
free_sja1000dev(dev);
goto failure_cleanup;
}
card->net_dev[i] = dev;
dev_info(&pdev->dev, "Channel #%d, %s at 0x%p, irq %d\n", i,
dev->name, priv->reg_base, dev->irq);
}
return 0;
failure_cleanup:
dev_err(&pdev->dev, "%s: failed: %d. Cleaning Up.\n", __func__, err);
f81601_pci_remove(pdev);
return err;
}
static struct pci_driver f81601_pci_driver = {
.name = "f81601",
.id_table = f81601_pci_tbl,
.probe = f81601_pci_probe,
.remove = f81601_pci_remove,
};
MODULE_DESCRIPTION("Fintek F81601 PCIE to 2 CANBUS adaptor driver");
MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>");
MODULE_LICENSE("GPL v2");
module_pci_driver(f81601_pci_driver);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment