Commit 2dcd495f authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Bjorn Andersson

arm64: dts: qcom: sm8450-hdk: add sound support

Add sound support to SM8450 HDK board.  Tested setup so far is only two
speakers (working) and head-phones (only one channel working).
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221202152054.357316-4-krzysztof.kozlowski@linaro.org
parent 14341e76
......@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
#include "sm8450.dtsi"
/ {
......@@ -406,6 +407,160 @@ &sdhc_2 {
status = "okay";
};
&soc {
wcd938x: codec {
compatible = "qcom,wcd9380-codec";
pinctrl-names = "default";
pinctrl-0 = <&wcd_default>;
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <1>;
vdd-buck-supply = <&vreg_s10b_1p8>;
vdd-rxtx-supply = <&vreg_s10b_1p8>;
vdd-io-supply = <&vreg_s10b_1p8>;
vdd-mic-bias-supply = <&vreg_bob>;
};
};
&sound {
compatible = "qcom,sm8450-sndcard";
model = "SM8450-HDK";
audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
"SpkrRight IN", "WSA_SPK2 OUT",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"AMIC2", "MIC BIAS2",
"VA DMIC0", "MIC BIAS1",
"VA DMIC1", "MIC BIAS1",
"VA DMIC2", "MIC BIAS3",
"TX DMIC0", "MIC BIAS1",
"TX DMIC1", "MIC BIAS2",
"TX DMIC2", "MIC BIAS3",
"TX SWR_ADC1", "ADC2_OUTPUT";
wcd-playback-dai-link {
link-name = "WCD Playback";
cpu {
sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
wcd-capture-dai-link {
link-name = "WCD Capture";
cpu {
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
};
codec {
sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
wsa-dai-link {
link-name = "WSA Playback";
cpu {
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
va-dai-link {
link-name = "VA Capture";
cpu {
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
};
codec {
sound-dai = <&vamacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
};
&swr0 {
left_spkr: speaker@0,1 {
compatible = "sdw10217020200";
reg = <0 1>;
pinctrl-names = "default";
pinctrl-0 = <&spkr_1_sd_n_active>;
powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrLeft";
#thermal-sensor-cells = <0>;
vdd-supply = <&vreg_s10b_1p8>;
};
right_spkr: speaker@0,2 {
compatible = "sdw10217020200";
reg = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&spkr_2_sd_n_active>;
powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrRight";
#thermal-sensor-cells = <0>;
vdd-supply = <&vreg_s10b_1p8>;
};
};
&swr1 {
status = "okay";
wcd_rx: codec@0,4 {
compatible = "sdw20217010d00";
reg = <0 4>;
qcom,rx-port-mapping = <1 2 3 4 5>;
};
};
&swr2 {
status = "okay";
wcd_tx: codec@0,3 {
compatible = "sdw20217010d00";
reg = <0 3>;
qcom,tx-port-mapping = <1 1 2 3>;
};
};
&tlmm {
gpio-reserved-ranges = <28 4>, <36 4>;
......@@ -461,3 +616,34 @@ &usb_1_qmpphy {
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l1b_0p91>;
};
&vamacro {
pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
pinctrl-names = "default";
vdd-micb-supply = <&vreg_s10b_1p8>;
qcom,dmic-sample-rate = <600000>;
};
&tlmm {
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
pins = "gpio1";
function = "gpio";
drive-strength = <4>;
bias-disable;
output-low;
};
spkr_2_sd_n_active: spkr-2-sd-n-active-state {
pins = "gpio89";
function = "gpio";
drive-strength = <4>;
bias-disable;
output-low;
};
wcd_default: wcd-default-state {
pins = "gpio43";
function = "gpio";
bias-disable;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment