drm: bridge: icn6211: Add HS/VS/DE polarity handling

The driver currently hard-codes HS/VS polarity to active-low and DE to
active-high, which is not correct for a lot of supported DPI panels.
Add the missing mode flag handling for HS/VS/DE polarity.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-4-marex@denx.de

drivers/gpu/drm/bridge/chipone-icn6211.c

@@ -165,8 +165,16 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
 				  struct drm_bridge_state *old_bridge_state)
 {
 	struct chipone *icn = bridge_to_chipone(bridge);
+	struct drm_atomic_state *state = old_bridge_state->base.state;
 	struct drm_display_mode *mode = &icn->mode;
+	const struct drm_bridge_state *bridge_state;
 	u16 hfp, hbp, hsync;
+	u32 bus_flags;
+	u8 pol;
+
+	/* Get the DPI flags from the bridge state. */
+	bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
+	bus_flags = bridge_state->output_bus_cfg.flags;
 
 	ICN6211_DSI(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_DSI);
 
@@ -206,7 +214,13 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
 	ICN6211_DSI(icn, HFP_MIN, hfp & 0xff);
 	ICN6211_DSI(icn, MIPI_PD_CK_LANE, 0xa0);
 	ICN6211_DSI(icn, PLL_CTRL(12), 0xff);
-	ICN6211_DSI(icn, BIST_POL, BIST_POL_DE_POL);
+
+	/* DPI HS/VS/DE polarity */
+	pol = ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? BIST_POL_HSYNC_POL : 0) |
+	      ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? BIST_POL_VSYNC_POL : 0) |
+	      ((bus_flags & DRM_BUS_FLAG_DE_HIGH) ? BIST_POL_DE_POL : 0);
+	ICN6211_DSI(icn, BIST_POL, pol);
+
 	ICN6211_DSI(icn, PLL_CTRL(6), PLL_CTRL_6_MIPI_CLK);
 	ICN6211_DSI(icn, PLL_REF_DIV, 0x71);
 	ICN6211_DSI(icn, PLL_INT(0), 0x2b);