Commit c0ff7a64 authored by Marek Vasut's avatar Marek Vasut Committed by Robert Foss

drm: bridge: icn6211: Fix HFP_HSW_HBP_HI and HFP_MIN handling

The HFP_HSW_HBP_HI register must be programmed with 2 LSbits of each
Horizontal Front Porch/Sync/Back Porch. Currently the driver programs
this register to 0, which breaks displays with either value above 255.

The HFP_MIN register must be set to the same value as HFP_LI, otherwise
there is visible image distortion, usually in the form of missing lines
at the bottom of the panel.

Fix this by correctly programming the HFP_HSW_HBP_HI and HFP_MIN registers.
Acked-by: default avatarMaxime Ripard <maxime@cerno.tech>
Fixes: ce517f18 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: default avatarRobert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-3-marex@denx.de
parent 2dcec57b
......@@ -35,6 +35,9 @@
#define HSYNC_LI 0x24
#define HBP_LI 0x25
#define HFP_HSW_HBP_HI 0x26
#define HFP_HSW_HBP_HI_HFP(n) (((n) & 0x300) >> 4)
#define HFP_HSW_HBP_HI_HS(n) (((n) & 0x300) >> 6)
#define HFP_HSW_HBP_HI_HBP(n) (((n) & 0x300) >> 8)
#define VFP 0x27
#define VSYNC 0x28
#define VBP 0x29
......@@ -163,6 +166,7 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
{
struct chipone *icn = bridge_to_chipone(bridge);
struct drm_display_mode *mode = &icn->mode;
u16 hfp, hbp, hsync;
ICN6211_DSI(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_DSI);
......@@ -178,13 +182,18 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
((mode->hdisplay >> 8) & 0xf) |
(((mode->vdisplay >> 8) & 0xf) << 4));
ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay);
hfp = mode->hsync_start - mode->hdisplay;
hsync = mode->hsync_end - mode->hsync_start;
hbp = mode->htotal - mode->hsync_end;
ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start);
ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end);
ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00);
ICN6211_DSI(icn, HFP_LI, hfp & 0xff);
ICN6211_DSI(icn, HSYNC_LI, hsync & 0xff);
ICN6211_DSI(icn, HBP_LI, hbp & 0xff);
/* Top two bits of Horizontal Front porch/Sync/Back porch */
ICN6211_DSI(icn, HFP_HSW_HBP_HI,
HFP_HSW_HBP_HI_HFP(hfp) |
HFP_HSW_HBP_HI_HS(hsync) |
HFP_HSW_HBP_HI_HBP(hbp));
ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay);
......@@ -194,7 +203,7 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
/* dsi specific sequence */
ICN6211_DSI(icn, SYNC_EVENT_DLY, 0x80);
ICN6211_DSI(icn, HFP_MIN, 0x28);
ICN6211_DSI(icn, HFP_MIN, hfp & 0xff);
ICN6211_DSI(icn, MIPI_PD_CK_LANE, 0xa0);
ICN6211_DSI(icn, PLL_CTRL(12), 0xff);
ICN6211_DSI(icn, BIST_POL, BIST_POL_DE_POL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment