Merge tag 'regmap-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "The big thing this release is a big cleanup of the interrupt code from
  Aidan MacDonald, plus a few new API updates:

   - Rework of the interrupt code, making it much simpler and easier to
     extend

   - Support for device specific update bits operations with devices
     that otherwise use bitstream interfaces

   - Support for bit operations on fields as well as whole registers"

* tag 'regmap-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: permit to set reg_update_bits with bulk implementation
  regmap: add WARN_ONCE when invalid mask is provided to regmap_field_init()
  regmap-irq: Fix bug in regmap_irq_get_irq_reg_linear()
  regmap: cache: Add extra parameter check in regcache_init
  regmap-irq: Deprecate the not_fixed_stride flag
  regmap-irq: Add get_irq_reg() callback
  regmap-irq: Fix inverted handling of unmask registers
  regmap-irq: Deprecate type registers and virtual registers
  regmap-irq: Introduce config registers for irq types
  regmap-irq: Refactor checks for status bulk read support
  regmap-irq: Remove mask_writeonly and regmap_irq_update_bits()
  regmap-irq: Remove inappropriate uses of regmap_irq_update_bits()
  regmap-irq: Remove an unnecessary restriction on type_in_mask
  regmap-irq: Cleanup sizeof(...) use in memory allocation
  regmap-irq: Remove unused type_reg_stride field
  regmap-irq: Convert bool bitfields to unsigned int
  regmap: Don't warn about cache only mode for devices with no cache
  regmap: provide regmap_field helpers for simple bit operations
  regmap: cache: Fix syntax errors in comments

drivers/base/regmap/regcache.c

@@ -133,6 +133,12 @@ int regcache_init(struct regmap *map, const struct regmap_config *config)
 		return -EINVAL;
 	}
 
+	if (config->num_reg_defaults && !config->reg_defaults) {
+		dev_err(map->dev,
+			"Register defaults number are set without the reg!\n");
+		return -EINVAL;
+	}
+
 	for (i = 0; i < config->num_reg_defaults; i++)
 		if (config->reg_defaults[i].reg % map->reg_stride)
 			return -EINVAL;
@@ -495,7 +501,8 @@ EXPORT_SYMBOL_GPL(regcache_drop_region);
 void regcache_cache_only(struct regmap *map, bool enable)
 {
 	map->lock(map->lock_arg);
-	WARN_ON(map->cache_bypass && enable);
+	WARN_ON(map->cache_type != REGCACHE_NONE &&
+		map->cache_bypass && enable);
 	map->cache_only = enable;
 	trace_regmap_cache_only(map, enable);
 	map->unlock(map->lock_arg);
@@ -531,7 +538,7 @@ EXPORT_SYMBOL_GPL(regcache_mark_dirty);
  * @enable: flag if changes should not be written to the cache
  *
  * When a register map is marked with the cache bypass option, writes
- * to the register map API will only update the hardware and not the
+ * to the register map API will only update the hardware and not
  * the cache directly.  This is useful when syncing the cache back to
  * the hardware.
  */

drivers/base/regmap/regmap.c

@@ -882,6 +882,8 @@ struct regmap *__regmap_init(struct device *dev,
 
 	if (config && config->read && config->write) {
 		map->reg_read  = _regmap_bus_read;
+		if (config->reg_update_bits)
+			map->reg_update_bits = config->reg_update_bits;
 
 		/* Bulk read/write */
 		map->read = config->read;
@@ -1298,6 +1300,9 @@ static void regmap_field_init(struct regmap_field *rm_field,
 	rm_field->reg = reg_field.reg;
 	rm_field->shift = reg_field.lsb;
 	rm_field->mask = GENMASK(reg_field.msb, reg_field.lsb);
+
+	WARN_ONCE(rm_field->mask == 0, "invalid empty mask defined\n");
+
 	rm_field->id_size = reg_field.id_size;
 	rm_field->id_offset = reg_field.id_offset;
 }
@@ -2218,6 +2223,28 @@ int regmap_field_update_bits_base(struct regmap_field *field,
 }
 EXPORT_SYMBOL_GPL(regmap_field_update_bits_base);
 
+/**
+ * regmap_field_test_bits() - Check if all specified bits are set in a
+ *                            register field.
+ *
+ * @field: Register field to operate on
+ * @bits: Bits to test
+ *
+ * Returns -1 if the underlying regmap_field_read() fails, 0 if at least one of the
+ * tested bits is not set and 1 if all tested bits are set.
+ */
+int regmap_field_test_bits(struct regmap_field *field, unsigned int bits)
+{
+	unsigned int val, ret;
+
+	ret = regmap_field_read(field, &val);
+	if (ret)
+		return ret;
+
+	return (val & bits) == bits;
+}
+EXPORT_SYMBOL_GPL(regmap_field_test_bits);
+
 /**
  * regmap_fields_update_bits_base() - Perform a read/modify/write cycle a
  *                                    register field with port ID

include/linux/regmap.h

@@ -1336,6 +1336,22 @@ static inline int regmap_field_update_bits(struct regmap_field *field,
 					     NULL, false, false);
 }
 
+static inline int regmap_field_set_bits(struct regmap_field *field,
+					unsigned int bits)
+{
+	return regmap_field_update_bits_base(field, bits, bits, NULL, false,
+					     false);
+}
+
+static inline int regmap_field_clear_bits(struct regmap_field *field,
+					  unsigned int bits)
+{
+	return regmap_field_update_bits_base(field, bits, 0, NULL, false,
+					     false);
+}
+
+int regmap_field_test_bits(struct regmap_field *field, unsigned int bits);
+
 static inline int
 regmap_field_force_update_bits(struct regmap_field *field,
 			       unsigned int mask, unsigned int val)
@@ -1424,6 +1440,8 @@ struct regmap_irq_sub_irq_map {
 	unsigned int *offset;
 };
 
+struct regmap_irq_chip_data;
+
 /**
  * struct regmap_irq_chip - Description of a generic regmap irq_chip.
  *
@@ -1451,32 +1469,50 @@ struct regmap_irq_sub_irq_map {
  *		   main_status set.
  *
  * @status_base: Base status register address.
- * @mask_base:   Base mask register address.
- * @mask_writeonly: Base mask register is write only.
- * @unmask_base:  Base unmask register address. for chips who have
- *                separate mask and unmask registers
+ * @mask_base:   Base mask register address. Mask bits are set to 1 when an
+ *               interrupt is masked, 0 when unmasked.
+ * @unmask_base:  Base unmask register address. Unmask bits are set to 1 when
+ *                an interrupt is unmasked and 0 when masked.
  * @ack_base:    Base ack address. If zero then the chip is clear on read.
  *               Using zero value is possible with @use_ack bit.
  * @wake_base:   Base address for wake enables.  If zero unsupported.
- * @type_base:   Base address for irq type.  If zero unsupported.
- * @virt_reg_base:   Base addresses for extra config regs.
+ * @type_base:   Base address for irq type.  If zero unsupported.  Deprecated,
+ *		 use @config_base instead.
+ * @virt_reg_base:   Base addresses for extra config regs. Deprecated, use
+ *		     @config_base instead.
+ * @config_base: Base address for IRQ type config regs. If null unsupported.
  * @irq_reg_stride:  Stride to use for chips where registers are not contiguous.
  * @init_ack_masked: Ack all masked interrupts once during initalization.
  * @mask_invert: Inverted mask register: cleared bits are masked out.
+ *		 Deprecated; prefer describing an inverted mask register as
+ *		 an unmask register.
+ * @mask_unmask_non_inverted: Controls mask bit inversion for chips that set
+ *	both @mask_base and @unmask_base. If false, mask and unmask bits are
+ *	inverted (which is deprecated behavior); if true, bits will not be
+ *	inverted and the registers keep their normal behavior. Note that if
+ *	you use only one of @mask_base or @unmask_base, this flag has no
+ *	effect and is unnecessary. Any new drivers that set both @mask_base
+ *	and @unmask_base should set this to true to avoid relying on the
+ *	deprecated behavior.
  * @use_ack:     Use @ack register even if it is zero.
  * @ack_invert:  Inverted ack register: cleared bits for ack.
  * @clear_ack:  Use this to set 1 and 0 or vice-versa to clear interrupts.
  * @wake_invert: Inverted wake register: cleared bits are wake enabled.
- * @type_invert: Invert the type flags.
- * @type_in_mask: Use the mask registers for controlling irq type. For
- *                interrupts defining type_rising/falling_mask use mask_base
- *                for edge configuration and never update bits in type_base.
+ * @type_invert: Invert the type flags. Deprecated, use config registers
+ *		 instead.
+ * @type_in_mask: Use the mask registers for controlling irq type. Use this if
+ *		  the hardware provides separate bits for rising/falling edge
+ *		  or low/high level interrupts and they should be combined into
+ *		  a single logical interrupt. Use &struct regmap_irq_type data
+ *		  to define the mask bit for each irq type.
  * @clear_on_unmask: For chips with interrupts cleared on read: read the status
  *                   registers before unmasking interrupts to clear any bits
  *                   set when they were masked.
  * @not_fixed_stride: Used when chip peripherals are not laid out with fixed
- * 		      stride. Must be used with sub_reg_offsets containing the
- * 		      offsets to each peripheral.
+ *		      stride. Must be used with sub_reg_offsets containing the
+ *		      offsets to each peripheral. Deprecated; the same thing
+ *		      can be accomplished with a @get_irq_reg callback, without
+ *		      the need for a @sub_reg_offsets table.
  * @status_invert: Inverted status register: cleared bits are active interrupts.
  * @runtime_pm:  Hold a runtime PM lock on the device when accessing it.
  *
@@ -1484,17 +1520,28 @@ struct regmap_irq_sub_irq_map {
  * @irqs:        Descriptors for individual IRQs.  Interrupt numbers are
  *               assigned based on the index in the array of the interrupt.
  * @num_irqs:    Number of descriptors.
- * @num_type_reg:    Number of type registers.
+ * @num_type_reg:    Number of type registers. Deprecated, use config registers
+ *		     instead.
  * @num_virt_regs:   Number of non-standard irq configuration registers.
- *		     If zero unsupported.
- * @type_reg_stride: Stride to use for chips where type registers are not
- *			contiguous.
+ *		     If zero unsupported. Deprecated, use config registers
+ *		     instead.
+ * @num_config_bases:	Number of config base registers.
+ * @num_config_regs:	Number of config registers for each config base register.
  * @handle_pre_irq:  Driver specific callback to handle interrupt from device
  *		     before regmap_irq_handler process the interrupts.
  * @handle_post_irq: Driver specific callback to handle interrupt from device
  *		     after handling the interrupts in regmap_irq_handler().
  * @set_type_virt:   Driver specific callback to extend regmap_irq_set_type()
- *		     and configure virt regs.
+ *		     and configure virt regs. Deprecated, use @set_type_config
+ *		     callback and config registers instead.
+ * @set_type_config: Callback used for configuring irq types.
+ * @get_irq_reg: Callback for mapping (base register, index) pairs to register
+ *		 addresses. The base register will be one of @status_base,
+ *		 @mask_base, etc., @main_status, or any of @config_base.
+ *		 The index will be in the range [0, num_main_regs[ for the
+ *		 main status base, [0, num_type_settings[ for any config
+ *		 register base, and [0, num_regs[ for any other base.
+ *		 If unspecified then regmap_irq_get_irq_reg_linear() is used.
  * @irq_drv_data:    Driver specific IRQ data which is passed as parameter when
  *		     driver specific pre/post interrupt handler is called.
  *
@@ -1517,20 +1564,21 @@ struct regmap_irq_chip {
 	unsigned int wake_base;
 	unsigned int type_base;
 	unsigned int *virt_reg_base;
+	const unsigned int *config_base;
 	unsigned int irq_reg_stride;
-	bool mask_writeonly:1;
-	bool init_ack_masked:1;
-	bool mask_invert:1;
-	bool use_ack:1;
-	bool ack_invert:1;
-	bool clear_ack:1;
-	bool wake_invert:1;
-	bool runtime_pm:1;
-	bool type_invert:1;
-	bool type_in_mask:1;
-	bool clear_on_unmask:1;
-	bool not_fixed_stride:1;
-	bool status_invert:1;
+	unsigned int init_ack_masked:1;
+	unsigned int mask_invert:1;
+	unsigned int mask_unmask_non_inverted:1;
+	unsigned int use_ack:1;
+	unsigned int ack_invert:1;
+	unsigned int clear_ack:1;
+	unsigned int wake_invert:1;
+	unsigned int runtime_pm:1;
+	unsigned int type_invert:1;
+	unsigned int type_in_mask:1;
+	unsigned int clear_on_unmask:1;
+	unsigned int not_fixed_stride:1;
+	unsigned int status_invert:1;
 
 	int num_regs;
 
@@ -1539,16 +1587,24 @@ struct regmap_irq_chip {
 
 	int num_type_reg;
 	int num_virt_regs;
-	unsigned int type_reg_stride;
+	int num_config_bases;
+	int num_config_regs;
 
 	int (*handle_pre_irq)(void *irq_drv_data);
 	int (*handle_post_irq)(void *irq_drv_data);
 	int (*set_type_virt)(unsigned int **buf, unsigned int type,
 			     unsigned long hwirq, int reg);
+	int (*set_type_config)(unsigned int **buf, unsigned int type,
+			       const struct regmap_irq *irq_data, int idx);
+	unsigned int (*get_irq_reg)(struct regmap_irq_chip_data *data,
+				    unsigned int base, int index);
 	void *irq_drv_data;
 };
 
-struct regmap_irq_chip_data;
+unsigned int regmap_irq_get_irq_reg_linear(struct regmap_irq_chip_data *data,
+					   unsigned int base, int index);
+int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type,
+				      const struct regmap_irq *irq_data, int idx);
 
 int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 			int irq_base, const struct regmap_irq_chip *chip,
@@ -1769,6 +1825,27 @@ regmap_field_force_update_bits(struct regmap_field *field,
 	return -EINVAL;
 }
 
+static inline int regmap_field_set_bits(struct regmap_field *field,
+					unsigned int bits)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_field_clear_bits(struct regmap_field *field,
+					  unsigned int bits)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_field_test_bits(struct regmap_field *field,
+					 unsigned int bits)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
 static inline int regmap_fields_write(struct regmap_field *field,
 				      unsigned int id, unsigned int val)
 {