arm64: dts: mediatek: adjust whitespace around '='

Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment.  No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220526204402.832393-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

arch/arm64/boot/dts/mediatek/mt2712-evb.dts

@@ -106,7 +106,7 @@ &cpu2 {
 };
 
 &eth {
-	phy-mode ="rgmii-rxid";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethernet_phy0>;
 	mediatek,tx-delay-ps = <1530>;
 	snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;

arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi

@@ -374,8 +374,8 @@ &mmc0 {
 	mmc-hs400-1_8v;
 	cap-mmc-hw-reset;
 	hs400-ds-delay = <0x14015>;
-	mediatek,hs200-cmd-int-delay=<30>;
-	mediatek,hs400-cmd-int-delay=<14>;
+	mediatek,hs200-cmd-int-delay = <30>;
+	mediatek,hs400-cmd-int-delay = <14>;
 	mediatek,hs400-cmd-resp-sel-rising;
 	vmmc-supply = <&mt6397_vemc_3v3_reg>;
 	vqmmc-supply = <&mt6397_vio18_reg>;

arch/arm64/boot/dts/mediatek/mt8173-evb.dts

@@ -148,8 +148,8 @@ &mmc0 {
 	bus-width = <8>;
 	max-frequency = <50000000>;
 	cap-mmc-highspeed;
-	mediatek,hs200-cmd-int-delay=<26>;
-	mediatek,hs400-cmd-int-delay=<14>;
+	mediatek,hs200-cmd-int-delay = <26>;
+	mediatek,hs400-cmd-int-delay = <14>;
 	mediatek,hs400-cmd-resp-sel-rising;
 	vmmc-supply = <&mt6397_vemc_3v3_reg>;
 	vqmmc-supply = <&mt6397_vio18_reg>;

arch/arm64/boot/dts/mediatek/mt8183.dtsi

@@ -1448,7 +1448,7 @@ i2c8: i2c@1101b000 {
 		};
 
 		ssusb: usb@11201000 {
-			compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+			compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
 			reg = <0 0x11201000 0 0x2e00>,
 			      <0 0x11203e00 0 0x0100>;
 			reg-names = "mac", "ippc";

arch/arm64/boot/dts/mediatek/mt8195-evb.dts

@@ -139,19 +139,19 @@ pins {
 };
 
 &u3phy0 {
-	status="okay";
+	status = "okay";
 };
 
 &u3phy1 {
-	status="okay";
+	status = "okay";
 };
 
 &u3phy2 {
-	status="okay";
+	status = "okay";
 };
 
 &u3phy3 {
-	status="okay";
+	status = "okay";
 };
 
 &uart0 {