Commit 2eea7f06 authored by Michal Suchanek's avatar Michal Suchanek Committed by Michael Ellerman

powerpc/64s: Add support for ori barrier_nospec patching

Based on the RFI patching. This is required to be able to disable the
speculation barrier.

Only one barrier type is supported and it does nothing when the
firmware does not enable it. Also re-patching modules is not supported
So the only meaningful thing that can be done is patching out the
speculation barrier at boot when the user says it is not wanted.
Signed-off-by: default avatarMichal Suchanek <msuchanek@suse.de>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent a6b3964a
......@@ -81,7 +81,7 @@ do { \
* Prevent execution of subsequent instructions until preceding branches have
* been fully resolved and are no longer executing speculatively.
*/
#define barrier_nospec_asm ori 31,31,0
#define barrier_nospec_asm NOSPEC_BARRIER_FIXUP_SECTION; nop
// This also acts as a compiler barrier due to the memory clobber.
#define barrier_nospec() asm (stringify_in_c(barrier_nospec_asm) ::: "memory")
......
......@@ -195,11 +195,20 @@ label##3: \
FTR_ENTRY_OFFSET 951b-952b; \
.popsection;
#define NOSPEC_BARRIER_FIXUP_SECTION \
953: \
.pushsection __barrier_nospec_fixup,"a"; \
.align 2; \
954: \
FTR_ENTRY_OFFSET 953b-954b; \
.popsection;
#ifndef __ASSEMBLY__
#include <linux/types.h>
extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
void apply_feature_fixups(void);
void setup_feature_keys(void);
......
......@@ -52,6 +52,7 @@ enum l1d_flush_type {
void setup_rfi_flush(enum l1d_flush_type, bool enable);
void do_rfi_flush_fixups(enum l1d_flush_type types);
void do_barrier_nospec_fixups(bool enable);
#endif /* !__ASSEMBLY__ */
......
......@@ -9,10 +9,19 @@
#include <linux/seq_buf.h>
#include <asm/security_features.h>
#include <asm/setup.h>
unsigned long powerpc_security_features __read_mostly = SEC_FTR_DEFAULT;
static bool barrier_nospec_enabled;
static void enable_barrier_nospec(bool enable)
{
barrier_nospec_enabled = enable;
do_barrier_nospec_fixups(enable);
}
ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf)
{
bool thread_priv;
......
......@@ -139,6 +139,13 @@ SECTIONS
*(__rfi_flush_fixup)
__stop___rfi_flush_fixup = .;
}
. = ALIGN(8);
__spec_barrier_fixup : AT(ADDR(__spec_barrier_fixup) - LOAD_OFFSET) {
__start___barrier_nospec_fixup = .;
*(__barrier_nospec_fixup)
__stop___barrier_nospec_fixup = .;
}
#endif
EXCEPTION_TABLE(0)
......
......@@ -162,6 +162,33 @@ void do_rfi_flush_fixups(enum l1d_flush_type types)
(types & L1D_FLUSH_MTTRIG) ? "mttrig type"
: "unknown");
}
void do_barrier_nospec_fixups(bool enable)
{
unsigned int instr, *dest;
long *start, *end;
int i;
start = PTRRELOC(&__start___barrier_nospec_fixup),
end = PTRRELOC(&__stop___barrier_nospec_fixup);
instr = 0x60000000; /* nop */
if (enable) {
pr_info("barrier-nospec: using ORI speculation barrier\n");
instr = 0x63ff0000; /* ori 31,31,0 speculation barrier */
}
for (i = 0; start < end; start++, i++) {
dest = (void *)start + *start;
pr_devel("patching dest %lx\n", (unsigned long)dest);
patch_instruction(dest, instr);
}
printk(KERN_DEBUG "barrier-nospec: patched %d locations\n", i);
}
#endif /* CONFIG_PPC_BOOK3S_64 */
void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment