ARM: S5PV210: Use gpio_request_one

By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s5pv210/mach-aquila.c

@@ -595,8 +595,7 @@ static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
 
 static void aquila_setup_sdhci(void)
 {
-	gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
-	gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
+	gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN");
 
 	s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
 	s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);

arch/arm/mach-s5pv210/mach-goni.c

@@ -227,8 +227,7 @@ static void __init goni_radio_init(void)
 	i2c1_devs[0].irq = gpio_to_irq(gpio);
 
 	gpio = S5PV210_GPJ2(5);			/* XMSMDATA_5 */
-	gpio_request(gpio, "FM_RST");
-	gpio_direction_output(gpio, 1);
+	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "FM_RST");
 }
 
 /* TSP */
@@ -264,8 +263,7 @@ static void __init goni_tsp_init(void)
 	int gpio;
 
 	gpio = S5PV210_GPJ1(3);		/* XMSMADDR_11 */
-	gpio_request(gpio, "TSP_LDO_ON");
-	gpio_direction_output(gpio, 1);
+	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
 	gpio_export(gpio, 0);
 
 	gpio = S5PV210_GPJ0(5);		/* XMSMADDR_5 */

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -153,15 +153,12 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
 {
 	if (power) {
 #if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request(S5PV210_GPD0(3), "GPD0");
-		gpio_direction_output(S5PV210_GPD0(3), 1);
+		gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0");
 		gpio_free(S5PV210_GPD0(3));
 #endif
 
 		/* fire nRESET on power up */
-		gpio_request(S5PV210_GPH0(6), "GPH0");
-
-		gpio_direction_output(S5PV210_GPH0(6), 1);
+		gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0");
 
 		gpio_set_value(S5PV210_GPH0(6), 0);
 		mdelay(10);
@@ -172,8 +169,7 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
 		gpio_free(S5PV210_GPH0(6));
 	} else {
 #if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request(S5PV210_GPD0(3), "GPD0");
-		gpio_direction_output(S5PV210_GPD0(3), 0);
+		gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0");
 		gpio_free(S5PV210_GPD0(3));
 #endif
 	}