Aic7xxx Driver Update

 o Fix disabling of PCI parity error interrupts.  We need to set
   FAILDIS in the SEQCTL register, not the HCNTRL register.

drivers/scsi/aic7xxx/aic7xxx.h

@@ -37,7 +37,7 @@
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.h#75 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.h#76 $
  *
  * $FreeBSD$
  */
@@ -1046,6 +1046,11 @@ struct ahc_softc {
 	struct target_cmd	 *targetcmds;
 	uint8_t			  tqinfifonext;
 
+	/*
+	 * Cached copy of the sequencer control register.
+	 */
+	uint8_t			  seqctl;
+
 	/*
 	 * Incoming and outgoing message handling.
 	 */

drivers/scsi/aic7xxx/aic7xxx_core.c

@@ -37,7 +37,7 @@
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.c#128 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.c#129 $
  *
  * $FreeBSD$
  */
@@ -291,7 +291,7 @@ ahc_restart(struct ahc_softc *ahc)
 			 ahc_inb(ahc, SEQ_FLAGS2) & ~SCB_DMA);
 	}
 	ahc_outb(ahc, MWI_RESIDUAL, 0);
-	ahc_outb(ahc, SEQCTL, FASTMODE);
+	ahc_outb(ahc, SEQCTL, ahc->seqctl);
 	ahc_outb(ahc, SEQADDR0, 0);
 	ahc_outb(ahc, SEQADDR1, 0);
 	ahc_unpause(ahc);
@@ -1467,7 +1467,7 @@ ahc_clear_critical_section(struct ahc_softc *ahc)
 			else
 				ahc_outb(ahc, SIMODE1, 0);
 			ahc_outb(ahc, CLRINT, CLRSCSIINT);
-			ahc_outb(ahc, SEQCTL, ahc_inb(ahc, SEQCTL) | STEP);
+			ahc_outb(ahc, SEQCTL, ahc->seqctl | STEP);
 			stepping = TRUE;
 		}
 		if ((ahc->features & AHC_DT) != 0) {
@@ -1481,7 +1481,7 @@ ahc_clear_critical_section(struct ahc_softc *ahc)
 	if (stepping) {
 		ahc_outb(ahc, SIMODE0, simode0);
 		ahc_outb(ahc, SIMODE1, simode1);
-		ahc_outb(ahc, SEQCTL, ahc_inb(ahc, SEQCTL) & ~STEP);
+		ahc_outb(ahc, SEQCTL, ahc->seqctl);
 	}
 }
 
@@ -3826,6 +3826,12 @@ ahc_alloc(void *platform_arg, char *name)
 	ahc->features = AHC_FENONE;
 	ahc->bugs = AHC_BUGNONE;
 	ahc->flags = AHC_FNONE;
+	/*
+	 * Default to all error reporting enabled with the
+	 * sequencer operating at its fastest speed.
+	 * The bus attach code may modify this.
+	 */
+	ahc->seqctl = FASTMODE;
 
 	for (i = 0; i < AHC_NUM_TARGETS; i++)
 		TAILQ_INIT(&ahc->untagged_queues[i]);

drivers/scsi/aic7xxx/aic7xxx_pci.c

@@ -39,7 +39,7 @@
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#65 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#66 $
  *
  * $FreeBSD$
  */
@@ -854,10 +854,8 @@ ahc_pci_config(struct ahc_softc *ahc, struct ahc_pci_identity *entry)
 	 * error reporting when doing this, so CIO bus, scb ram, and
 	 * scratch ram parity errors will be ignored too.
 	 */
-	if ((ahc->flags & AHC_DISABLE_PCI_PERR) != 0) {
-		ahc->pause |= FAILDIS;
-		ahc->unpause |= FAILDIS;
-	}
+	if ((ahc->flags & AHC_DISABLE_PCI_PERR) != 0)
+		ahc->seqctl |= FAILDIS;
 
 	ahc->bus_intr = ahc_pci_intr;
 	ahc->bus_chip_init = ahc_pci_chip_init;
@@ -2044,8 +2042,8 @@ ahc_pci_intr(struct ahc_softc *ahc)
 "%s: WARNING WARNING WARNING WARNING\n",
 		       ahc_name(ahc), ahc_name(ahc), ahc_name(ahc),
 		       ahc_name(ahc), ahc_name(ahc), ahc_name(ahc));
-		ahc->pause |= FAILDIS;
-		ahc->unpause |= FAILDIS;
+		ahc->seqctl |= FAILDIS;
+		ahc_outb(ahc, SEQCTL, ahc->seqctl);
 	}
 	ahc_unpause(ahc);
 }