Commit 2f5effcb authored by Lee Jones's avatar Lee Jones Committed by Jonathan Cameron

iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor

Due to the MACRO used, the task of reading, understanding and maintaining
the LPS331AP's channel descriptor is substantially difficult. This patch
is based on the view that it's better to have easy to read, maintainable
code than to save a few lines here and there. For that reason we're
expanding the array so initialisation is completed in full.
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 302fbd50
...@@ -64,16 +64,39 @@ ...@@ -64,16 +64,39 @@
#define ST_PRESS_LPS331AP_OUT_XL_ADDR 0x28 #define ST_PRESS_LPS331AP_OUT_XL_ADDR 0x28
#define ST_TEMP_LPS331AP_OUT_L_ADDR 0x2b #define ST_TEMP_LPS331AP_OUT_L_ADDR 0x2b
static const struct iio_chan_spec st_press_channels[] = { static const struct iio_chan_spec st_press_lps331ap_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_PRESSURE, {
.type = IIO_PRESSURE,
.channel2 = IIO_NO_MOD,
.address = ST_PRESS_LPS331AP_OUT_XL_ADDR,
.scan_index = ST_SENSORS_SCAN_X,
.scan_type = {
.sign = 'u',
.realbits = 24,
.storagebits = 24,
.endianness = IIO_LE,
},
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 0, IIO_NO_MOD, 'u', IIO_LE, 24, 24, .modified = 0,
ST_PRESS_LPS331AP_OUT_XL_ADDR), },
ST_SENSORS_LSM_CHANNELS(IIO_TEMP, {
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | .type = IIO_TEMP,
BIT(IIO_CHAN_INFO_OFFSET), .channel2 = IIO_NO_MOD,
-1, 0, IIO_NO_MOD, 's', IIO_LE, 16, 16, .address = ST_TEMP_LPS331AP_OUT_L_ADDR,
ST_TEMP_LPS331AP_OUT_L_ADDR), .scan_index = -1,
.scan_type = {
.sign = 'u',
.realbits = 16,
.storagebits = 16,
.endianness = IIO_LE,
},
.info_mask_separate =
BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_OFFSET),
.modified = 0,
},
IIO_CHAN_SOFT_TIMESTAMP(1) IIO_CHAN_SOFT_TIMESTAMP(1)
}; };
...@@ -83,7 +106,7 @@ static const struct st_sensors st_press_sensors[] = { ...@@ -83,7 +106,7 @@ static const struct st_sensors st_press_sensors[] = {
.sensors_supported = { .sensors_supported = {
[0] = LPS331AP_PRESS_DEV_NAME, [0] = LPS331AP_PRESS_DEV_NAME,
}, },
.ch = (struct iio_chan_spec *)st_press_channels, .ch = (struct iio_chan_spec *)st_press_lps331ap_channels,
.odr = { .odr = {
.addr = ST_PRESS_LPS331AP_ODR_ADDR, .addr = ST_PRESS_LPS331AP_ODR_ADDR,
.mask = ST_PRESS_LPS331AP_ODR_MASK, .mask = ST_PRESS_LPS331AP_ODR_MASK,
...@@ -222,7 +245,7 @@ int st_press_common_probe(struct iio_dev *indio_dev, ...@@ -222,7 +245,7 @@ int st_press_common_probe(struct iio_dev *indio_dev,
pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS; pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
pdata->multiread_bit = pdata->sensor->multi_read_bit; pdata->multiread_bit = pdata->sensor->multi_read_bit;
indio_dev->channels = pdata->sensor->ch; indio_dev->channels = pdata->sensor->ch;
indio_dev->num_channels = ARRAY_SIZE(st_press_channels); indio_dev->num_channels = ARRAY_SIZE(st_press_lps331ap_channels);
if (pdata->sensor->fs.addr != 0) if (pdata->sensor->fs.addr != 0)
pdata->current_fullscale = (struct st_sensor_fullscale_avl *) pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment