Commit 2f73a068 authored by Jonas Aaberg's avatar Jonas Aaberg Committed by Linus Walleij

ARM: plat-nomadik: timer: Add support for periodic timers

This adds support for a periodic mode in the MTU (Nomadik)
timer clockevent driver. It also include changes needed for
deeper powerstates where MTU block gets powered off.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarJonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 5f5663a4
......@@ -23,7 +23,12 @@
#include <plat/mtu.h>
static bool clkevt_periodic;
static u32 clk_prescale;
static u32 nmdk_cycle; /* write-once */
void __iomem *mtu_base; /* Assigned by machine code */
#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
/*
* Override the global weak sched_clock symbol with this
......@@ -49,31 +54,55 @@ static void notrace nomadik_update_sched_clock(void)
update_sched_clock(&cd, cyc, (u32)~0);
}
#endif
/* Clockevent device: use one-shot mode */
static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
{
writel(1 << 1, mtu_base + MTU_IMSC);
writel(evt, mtu_base + MTU_LR(1));
/* Load highest value, enable device, enable interrupts */
writel(MTU_CRn_ONESHOT | clk_prescale |
MTU_CRn_32BITS | MTU_CRn_ENA,
mtu_base + MTU_CR(1));
return 0;
}
static void nmdk_clkevt_reset(void)
{
if (clkevt_periodic) {
/* Timer: configure load and background-load, and fire it up */
writel(nmdk_cycle, mtu_base + MTU_LR(1));
writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
writel(MTU_CRn_PERIODIC | clk_prescale |
MTU_CRn_32BITS | MTU_CRn_ENA,
mtu_base + MTU_CR(1));
writel(1 << 1, mtu_base + MTU_IMSC);
} else {
/* Generate an interrupt to start the clockevent again */
(void) nmdk_clkevt_next(nmdk_cycle, NULL);
}
}
static void nmdk_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
{
u32 cr;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
pr_err("%s: periodic mode not supported\n", __func__);
clkevt_periodic = true;
nmdk_clkevt_reset();
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Load highest value, enable device, enable interrupts */
cr = readl(mtu_base + MTU_CR(1));
writel(0, mtu_base + MTU_LR(1));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
writel(1 << 1, mtu_base + MTU_IMSC);
clkevt_periodic = false;
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
/* disable irq */
writel(0, mtu_base + MTU_IMSC);
/* disable timer */
cr = readl(mtu_base + MTU_CR(1));
cr &= ~MTU_CRn_ENA;
writel(cr, mtu_base + MTU_CR(1));
writel(0, mtu_base + MTU_CR(1));
/* load some high default value */
writel(0xffffffff, mtu_base + MTU_LR(1));
break;
......@@ -82,16 +111,9 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
}
}
static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
{
/* writing the value has immediate effect */
writel(evt, mtu_base + MTU_LR(1));
return 0;
}
static struct clock_event_device nmdk_clkevt = {
.name = "mtu_1",
.features = CLOCK_EVT_FEAT_ONESHOT,
.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.rating = 200,
.set_mode = nmdk_clkevt_mode,
.set_next_event = nmdk_clkevt_next,
......@@ -116,11 +138,23 @@ static struct irqaction nmdk_timer_irq = {
.dev_id = &nmdk_clkevt,
};
static void nmdk_clksrc_reset(void)
{
/* Disable */
writel(0, mtu_base + MTU_CR(0));
/* ClockSource: configure load and background-load, and fire it up */
writel(nmdk_cycle, mtu_base + MTU_LR(0));
writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
mtu_base + MTU_CR(0));
}
void __init nmdk_timer_init(void)
{
unsigned long rate;
struct clk *clk0;
u32 cr = MTU_CRn_32BITS;
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
......@@ -138,16 +172,16 @@ void __init nmdk_timer_init(void)
rate = clk_get_rate(clk0);
if (rate > 32000000) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
clk_prescale = MTU_CRn_PRESCALE_16;
} else {
cr |= MTU_CRn_PRESCALE_1;
clk_prescale = MTU_CRn_PRESCALE_1;
}
nmdk_cycle = (rate + HZ/2) / HZ;
/* Timer 0 is the free running clocksource */
writel(cr, mtu_base + MTU_CR(0));
writel(0, mtu_base + MTU_LR(0));
writel(0, mtu_base + MTU_BGLR(0));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
nmdk_clksrc_reset();
if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
rate, 200, 32, clocksource_mmio_readl_down))
......@@ -160,8 +194,6 @@ void __init nmdk_timer_init(void)
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
nmdk_clkevt.max_delta_ns =
clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
nmdk_clkevt.min_delta_ns =
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment