Commit 2f9237d4 authored by Christoph Hellwig's avatar Christoph Hellwig

dma-mapping: make support for dma ops optional

Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Tested-by: default avatarAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: default avatarAlexey Kardashevskiy <aik@ozlabs.ru>
parent b4174173
......@@ -7,6 +7,7 @@ config ALPHA
select ARCH_NO_PREEMPT
select ARCH_NO_SG_CHAIN
select ARCH_USE_CMPXCHG_LOCKREF
select DMA_OPS if PCI
select FORCE_PCI if !ALPHA_JENSEN
select PCI_DOMAINS if PCI
select PCI_SYSCALL if PCI
......
......@@ -41,6 +41,7 @@ config ARM
select CPU_PM if SUSPEND || CPU_IDLE
select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
select DMA_DECLARE_COHERENT
select DMA_OPS
select DMA_REMAP if MMU
select EDAC_SUPPORT
select EDAC_ATOMIC_SCRUB
......
......@@ -192,6 +192,7 @@ config IA64_SGI_UV
config IA64_HP_SBA_IOMMU
bool "HP SBA IOMMU support"
select DMA_OPS
default y
help
Say Y here to add support for the SBA IOMMU found on HP zx1 and
......
......@@ -367,6 +367,7 @@ config MACH_JAZZ
select ARC_PROMLIB
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select DMA_OPS
select FW_ARC
select FW_ARC32
select ARCH_MAY_HAVE_PC_FDC
......
......@@ -14,6 +14,7 @@ config PARISC
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARCH_NO_SG_CHAIN
select ARCH_SUPPORTS_MEMORY_FAILURE
select DMA_OPS
select RTC_CLASS
select RTC_DRV_GENERIC
select INIT_ALL_POSSIBLE
......
......@@ -151,6 +151,7 @@ config PPC
select BUILDTIME_TABLE_SORT
select CLONE_BACKWARDS
select DCACHE_WORD_ACCESS if PPC64 && CPU_LITTLE_ENDIAN
select DMA_OPS if PPC64
select DYNAMIC_FTRACE if FUNCTION_TRACER
select EDAC_ATOMIC_SCRUB
select EDAC_SUPPORT
......
......@@ -113,6 +113,7 @@ config S390
select ARCH_WANT_IPC_PARSE_VERSION
select BUILDTIME_TABLE_SORT
select CLONE_BACKWARDS2
select DMA_OPS if PCI
select DYNAMIC_FTRACE if FUNCTION_TRACER
select GENERIC_CLOCKEVENTS
select GENERIC_CPU_AUTOPROBE
......
......@@ -15,6 +15,7 @@ config SPARC
default y
select ARCH_MIGHT_HAVE_PC_PARPORT if SPARC64 && PCI
select ARCH_MIGHT_HAVE_PC_SERIO
select DMA_OPS
select OF
select OF_PROMTREE
select HAVE_ASM_MODVERSIONS
......
......@@ -909,6 +909,7 @@ config DMI
config GART_IOMMU
bool "Old AMD GART IOMMU support"
select DMA_OPS
select IOMMU_HELPER
select SWIOTLB
depends on X86_64 && PCI && AMD_NB
......
......@@ -1183,6 +1183,8 @@ static void setup_dma_device(struct ib_device *device)
struct device *parent = device->dev.parent;
WARN_ON_ONCE(device->dma_device);
#ifdef CONFIG_DMA_OPS
if (device->dev.dma_ops) {
/*
* The caller provided custom DMA operations. Copy the
......@@ -1203,7 +1205,9 @@ static void setup_dma_device(struct ib_device *device)
else
WARN_ON_ONCE(true);
}
} else {
} else
#endif /* CONFIG_DMA_OPS */
{
/*
* The caller did not provide custom DMA operations. Use the
* DMA mapping operations of the parent device.
......
......@@ -97,6 +97,7 @@ config OF_IOMMU
# IOMMU-agnostic DMA-mapping layer
config IOMMU_DMA
bool
select DMA_OPS
select IOMMU_API
select IOMMU_IOVA
select IRQ_MSI_IOMMU
......@@ -183,6 +184,7 @@ config DMAR_TABLE
config INTEL_IOMMU
bool "Support for Intel IOMMU using DMA Remapping Devices"
depends on PCI_MSI && ACPI && (X86 || IA64)
select DMA_OPS
select IOMMU_API
select IOMMU_IOVA
select NEED_DMA_MAP_STATE
......
......@@ -382,7 +382,7 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
dma_set_max_seg_size(&dev->ofdev.dev, 65536);
dma_set_seg_boundary(&dev->ofdev.dev, 0xffffffff);
#ifdef CONFIG_PCI
#if defined(CONFIG_PCI) && defined(CONFIG_DMA_OPS)
/* Set the DMA ops to the ones from the PCI device, this could be
* fishy if we didn't know that on PowerMac it's always direct ops
* or iommu ops that will work fine
......@@ -391,7 +391,7 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
*/
dev->ofdev.dev.archdata = chip->lbus.pdev->dev.archdata;
dev->ofdev.dev.dma_ops = chip->lbus.pdev->dev.dma_ops;
#endif /* CONFIG_PCI */
#endif /* CONFIG_PCI && CONFIG_DMA_OPS */
#ifdef DEBUG
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
......
......@@ -4,6 +4,7 @@ menu "Intel MIC & related support"
config INTEL_MIC_BUS
tristate "Intel MIC Bus Driver"
depends on 64BIT && PCI && X86
select DMA_OPS
help
This option is selected by any driver which registers a
device or driver on the MIC Bus, such as CONFIG_INTEL_MIC_HOST,
......@@ -19,6 +20,7 @@ config INTEL_MIC_BUS
config SCIF_BUS
tristate "SCIF Bus Driver"
depends on 64BIT && PCI && X86
select DMA_OPS
help
This option is selected by any driver which registers a
device or driver on the SCIF Bus, such as CONFIG_INTEL_MIC_HOST
......@@ -33,6 +35,7 @@ config SCIF_BUS
config VOP_BUS
tristate "VOP Bus Driver"
select DMA_OPS
help
This option is selected by any driver which registers a
device or driver on the VOP Bus, such as CONFIG_INTEL_MIC_HOST
......@@ -49,6 +52,7 @@ config INTEL_MIC_HOST
tristate "Intel MIC Host Driver"
depends on 64BIT && PCI && X86
depends on INTEL_MIC_BUS && SCIF_BUS && MIC_COSM && VOP_BUS
select DMA_OPS
help
This enables Host Driver support for the Intel Many Integrated
Core (MIC) family of PCIe form factor coprocessor devices that
......
......@@ -11,6 +11,7 @@ if VDPA
config VDPA_SIM
tristate "vDPA device simulator"
depends on RUNTIME_TESTING_MENU && HAS_DMA
select DMA_OPS
select VHOST_RING
default n
help
......
......@@ -179,6 +179,7 @@ config XEN_GRANT_DMA_ALLOC
config SWIOTLB_XEN
def_bool y
select DMA_OPS
select SWIOTLB
config XEN_PCIDEV_BACKEND
......
......@@ -568,8 +568,9 @@ struct device {
#ifdef CONFIG_GENERIC_MSI_IRQ
struct list_head msi_list;
#endif
#ifdef CONFIG_DMA_OPS
const struct dma_map_ops *dma_ops;
#endif
u64 *dma_mask; /* dma mask (if dma'able device) */
u64 coherent_dma_mask;/* Like dma_mask, but for
alloc_coherent mappings as
......
......@@ -191,6 +191,7 @@ static inline int dma_mmap_from_global_coherent(struct vm_area_struct *vma,
#ifdef CONFIG_HAS_DMA
#include <asm/dma-mapping.h>
#ifdef CONFIG_DMA_OPS
static inline const struct dma_map_ops *get_dma_ops(struct device *dev)
{
if (dev->dma_ops)
......@@ -203,7 +204,16 @@ static inline void set_dma_ops(struct device *dev,
{
dev->dma_ops = dma_ops;
}
#else /* CONFIG_DMA_OPS */
static inline const struct dma_map_ops *get_dma_ops(struct device *dev)
{
return NULL;
}
static inline void set_dma_ops(struct device *dev,
const struct dma_map_ops *dma_ops)
{
}
#endif /* CONFIG_DMA_OPS */
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
......
......@@ -5,6 +5,9 @@ config HAS_DMA
depends on !NO_DMA
default y
config DMA_OPS
bool
config NEED_SG_DMA_LENGTH
bool
......@@ -60,6 +63,7 @@ config DMA_NONCOHERENT_CACHE_SYNC
config DMA_VIRT_OPS
bool
depends on HAS_DMA
select DMA_OPS
config SWIOTLB
bool
......
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_HAS_DMA) += mapping.o direct.o dummy.o
obj-$(CONFIG_HAS_DMA) += mapping.o direct.o
obj-$(CONFIG_DMA_OPS) += dummy.o
obj-$(CONFIG_DMA_CMA) += contiguous.o
obj-$(CONFIG_DMA_DECLARE_COHERENT) += coherent.o
obj-$(CONFIG_DMA_VIRT_OPS) += virt.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment