thermal/drivers/imx: Use generic thermal_zone_get_trip() function

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20221003092602.1323944-22-daniel.lezcano@linaro.org

drivers/thermal/imx_thermal.c

@@ -76,7 +76,6 @@
 enum imx_thermal_trip {
 	IMX_TRIP_PASSIVE,
 	IMX_TRIP_CRITICAL,
-	IMX_TRIP_NUM,
 };
 
 #define IMX_POLLING_DELAY		2000 /* millisecond */
@@ -115,6 +114,11 @@ struct thermal_soc_data {
 	u32 low_alarm_shift;
 };
 
+static struct thermal_trip trips[] = {
+	[IMX_TRIP_PASSIVE]  = { .type = THERMAL_TRIP_PASSIVE  },
+	[IMX_TRIP_CRITICAL] = { .type = THERMAL_TRIP_CRITICAL },
+};
+
 static struct thermal_soc_data thermal_imx6q_data = {
 	.version = TEMPMON_IMX6Q,
 
@@ -201,8 +205,6 @@ struct imx_thermal_data {
 	struct thermal_cooling_device *cdev;
 	struct regmap *tempmon;
 	u32 c1, c2; /* See formula in imx_init_calib() */
-	int temp_passive;
-	int temp_critical;
 	int temp_max;
 	int alarm_temp;
 	int last_temp;
@@ -279,12 +281,12 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 
 	/* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
 	if (data->socdata->version == TEMPMON_IMX6Q) {
-		if (data->alarm_temp == data->temp_passive &&
-			*temp >= data->temp_passive)
-			imx_set_alarm_temp(data, data->temp_critical);
-		if (data->alarm_temp == data->temp_critical &&
-			*temp < data->temp_passive) {
-			imx_set_alarm_temp(data, data->temp_passive);
+		if (data->alarm_temp == trips[IMX_TRIP_PASSIVE].temperature &&
+			*temp >= trips[IMX_TRIP_PASSIVE].temperature)
+			imx_set_alarm_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
+		if (data->alarm_temp == trips[IMX_TRIP_CRITICAL].temperature &&
+			*temp < trips[IMX_TRIP_PASSIVE].temperature) {
+			imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
 			dev_dbg(&tz->device, "thermal alarm off: T < %d\n",
 				data->alarm_temp / 1000);
 		}
@@ -330,29 +332,10 @@ static int imx_change_mode(struct thermal_zone_device *tz,
 	return 0;
 }
 
-static int imx_get_trip_type(struct thermal_zone_device *tz, int trip,
-			     enum thermal_trip_type *type)
-{
-	*type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
-					     THERMAL_TRIP_CRITICAL;
-	return 0;
-}
-
 static int imx_get_crit_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct imx_thermal_data *data = tz->devdata;
-
-	*temp = data->temp_critical;
-	return 0;
-}
-
-static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip,
-			     int *temp)
-{
-	struct imx_thermal_data *data = tz->devdata;
+	*temp = trips[IMX_TRIP_CRITICAL].temperature;
 
-	*temp = (trip == IMX_TRIP_PASSIVE) ? data->temp_passive :
-					     data->temp_critical;
 	return 0;
 }
 
@@ -371,10 +354,10 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
 		return -EPERM;
 
 	/* do not allow passive to be set higher than critical */
-	if (temp < 0 || temp > data->temp_critical)
+	if (temp < 0 || temp > trips[IMX_TRIP_CRITICAL].temperature)
 		return -EINVAL;
 
-	data->temp_passive = temp;
+	trips[IMX_TRIP_PASSIVE].temperature = temp;
 
 	imx_set_alarm_temp(data, temp);
 
@@ -423,8 +406,6 @@ static struct thermal_zone_device_ops imx_tz_ops = {
 	.unbind = imx_unbind,
 	.get_temp = imx_get_temp,
 	.change_mode = imx_change_mode,
-	.get_trip_type = imx_get_trip_type,
-	.get_trip_temp = imx_get_trip_temp,
 	.get_crit_temp = imx_get_crit_temp,
 	.set_trip_temp = imx_set_trip_temp,
 };
@@ -507,8 +488,8 @@ static void imx_init_temp_grade(struct platform_device *pdev, u32 ocotp_mem0)
 	 * Set the critical trip point at 5 °C under max
 	 * Set the passive trip point at 10 °C under max (changeable via sysfs)
 	 */
-	data->temp_critical = data->temp_max - (1000 * 5);
-	data->temp_passive = data->temp_max - (1000 * 10);
+	trips[IMX_TRIP_PASSIVE].temperature = data->temp_max - (1000 * 10);
+	trips[IMX_TRIP_CRITICAL].temperature = data->temp_max - (1000 * 5);
 }
 
 static int imx_init_from_tempmon_data(struct platform_device *pdev)
@@ -743,12 +724,13 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		goto legacy_cleanup;
 	}
 
-	data->tz = thermal_zone_device_register("imx_thermal_zone",
-						IMX_TRIP_NUM,
-						BIT(IMX_TRIP_PASSIVE), data,
-						&imx_tz_ops, NULL,
-						IMX_PASSIVE_DELAY,
-						IMX_POLLING_DELAY);
+	data->tz = thermal_zone_device_register_with_trips("imx_thermal_zone",
+							   trips,
+							   ARRAY_SIZE(trips),
+							   BIT(IMX_TRIP_PASSIVE), data,
+							   &imx_tz_ops, NULL,
+							   IMX_PASSIVE_DELAY,
+							   IMX_POLLING_DELAY);
 	if (IS_ERR(data->tz)) {
 		ret = PTR_ERR(data->tz);
 		dev_err(&pdev->dev,
@@ -758,8 +740,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
 
 	dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC"
 		 " critical:%dC passive:%dC\n", data->temp_grade,
-		 data->temp_max / 1000, data->temp_critical / 1000,
-		 data->temp_passive / 1000);
+		 data->temp_max / 1000, trips[IMX_TRIP_CRITICAL].temperature / 1000,
+		 trips[IMX_TRIP_PASSIVE].temperature / 1000);
 
 	/* Enable measurements at ~ 10 Hz */
 	regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
@@ -767,10 +749,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
 	regmap_write(map, data->socdata->measure_freq_ctrl + REG_SET,
 		     measure_freq << data->socdata->measure_freq_shift);
-	imx_set_alarm_temp(data, data->temp_passive);
+	imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
 
 	if (data->socdata->version == TEMPMON_IMX6SX)
-		imx_set_panic_temp(data, data->temp_critical);
+		imx_set_panic_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
 
 	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
 		     data->socdata->power_down_mask);