Commit 302946de authored by Roger Quadros's avatar Roger Quadros Committed by Tony Lindgren

ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring

NAND uses wait pin only to indicate device readiness after
a block/page operation. It is not use to extend individual
read/write cycle and so read/write wait pin monitoring must
be disabled for NAND.

This patch also gets rid of the below warning when NAND is
accessed for the first time.

omap_l3_noc 44000000.ocp: L3 application error: target 13 mod:1 (unclearable)
Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
Reviewed-by: default avatarPekon Gupta <pekon@pek-sem.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 6b869110
...@@ -443,8 +443,6 @@ nand@0,0 { ...@@ -443,8 +443,6 @@ nand@0,0 {
gpmc,rd-cycle-ns = <40>; gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>;
gpmc,wait-pin = <0>; gpmc,wait-pin = <0>;
gpmc,wait-on-read;
gpmc,wait-on-write;
gpmc,bus-turnaround-ns = <0>; gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>; gpmc,clk-activation-ns = <0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment