staging: add ath6kl driver for AR6003 chip

AR6003 is a single stream, SDIO based 802.11 chipset from
Atheros optimized for mobile and embedded devices. ath6kl is a
cfg80211 driver for AR6003 and supports both the station and
AP mode of operation.

Station mode supports 802.11 a/b/g/n with HT20 on 2.4/5GHz and
HT40 only on 5GHz. Some of the other features include WPA/WPA2,
WPS, WMM, WMM-PS, and BT coexistence. AP mode can be operated
only in b/g mode with support for a subset of features mentioned
above.

The driver supports cfg80211 but comes with its own set of
wext ioctls which have historically supported some of our
customers with features like BT 3.0 and AP mode of operation.

For further details, please refer to:

http://wireless.kernel.org/en/users/Drivers/ath6kl

The driver requires firmware that runs on the chip's network
processor. The majority of it is stored in ROM. The binaries
that are downloaded and executed from RAM are as follows:

1) Patch against the code in ROM for bug fixes and feature
   enhancements.
2) Code to copy the data from the OTP region of the memory
   into RAM.
3) Calibration file carrying board specific data.

The above files need to be present in the directory
'/lib/firmware/ath6k/AR6003/hw2.0/' for the driver to initialize
the chip upon enumeration. The files can be downloaded from the
link specified at the following location:

http://wireless.kernel.org/en/users/Drivers/ath6kl#Download

This driver is only provided in the interim while we work on
the mac80211 replacement, ath6k. Once the mac80211 driver
achieves feature parity with the ath6kl driver, the ath6kl will
be deprecated and removed from staging.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/Kconfig

@@ -157,5 +157,7 @@ source "drivers/staging/westbridge/Kconfig"
 
 source "drivers/staging/sbe-2t3e3/Kconfig"
 
+source "drivers/staging/ath6kl/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING

drivers/staging/Makefile

@@ -59,3 +59,4 @@ obj-$(CONFIG_TIDSPBRIDGE)	+= tidspbridge/
 obj-$(CONFIG_ACPI_QUICKSTART)	+= quickstart/
 obj-$(CONFIG_WESTBRIDGE_ASTORIA)	+= westbridge/astoria/
 obj-$(CONFIG_SBE_2T3E3)	+= sbe-2t3e3/
+obj-$(CONFIG_ATH6K_LEGACY)	+= ath6kl/

drivers/staging/ath6kl/Kconfig

+config ATH6K_LEGACY
+	tristate "Atheros AR6003 support (non mac80211)"
+        depends on MMC && WLAN
+        select WIRELESS_EXT
+        select WEXT_PRIV
+	help
+	This module adds support for wireless adapters based on Atheros AR6003 chipset running over SDIO. If you choose to build it as a module, it will be called ath6kl. Pls note that AR6002 and AR6001 are not supported by this driver.
+
+choice
+	prompt "AR6003 Board Data Configuration"
+	depends on ATH6K_LEGACY
+	default AR600x_SD31_XXX
+	help
+	Select the appropriate board data template from the list below that matches your AR6003 based reference design.
+
+config AR600x_SD31_XXX
+	bool "SD31-xxx"
+	help
+        Board Data file for a standard SD31 reference design (File: bdata.SD31.bin)
+
+config AR600x_WB31_XXX
+	bool "WB31-xxx"
+	help
+        Board Data file for a standard WB31 (BT/WiFi) reference design (File: bdata.WB31.bin)
+
+config AR600x_SD32_XXX
+	bool "SD32-xxx"
+	help
+        Board Data file for a standard SD32 (5GHz) reference design (File: bdata.SD32.bin)
+
+config AR600x_CUSTOM_XXX
+	bool "CUSTOM-xxx"
+	help
+        Board Data file for a custom reference design (File: should be named as bdata.CUSTOM.bin)
+endchoice
+
+config ATH6KL_ENABLE_COEXISTENCE
+	bool "BT Coexistence support"
+	depends on ATH6K_LEGACY
+	help
+	Enables WLAN/BT coexistence support. Select the apprpriate configuration from below.
+
+choice
+	prompt "Front-End Antenna Configuration"
+	depends on ATH6KL_ENABLE_COEXISTENCE
+	default AR600x_DUAL_ANTENNA
+	help
+	Indicates the number of antennas being used by BT and WLAN. Select the appropriate configuration from the list below that matches your AR6003 based reference design.
+
+config AR600x_DUAL_ANTENNA
+	bool "Dual Antenna"
+	help
+        Dual Antenna Design
+
+config AR600x_SINGLE_ANTENNA
+	bool "Single Antenna"
+	help
+        Single Antenna Design
+endchoice
+
+choice
+	prompt "Collocated Bluetooth Type"
+	depends on ATH6KL_ENABLE_COEXISTENCE
+	default AR600x_BT_AR3001
+	help
+	Select the appropriate configuration from the list below that matches your AR6003 based reference design.
+
+config AR600x_BT_QCOM
+	bool "Qualcomm BTS4020X"
+	help
+        Qualcomm BT (3 Wire PTA)
+
+config AR600x_BT_CSR
+	bool "CSR BC06"
+	help
+        CSR BT (3 Wire PTA)
+
+config AR600x_BT_AR3001
+	bool "Atheros AR3001"
+	help
+        Atheros BT (3 Wire PTA)
+endchoice
+
+config ATH6KL_HCI_BRIDGE
+	bool "HCI over SDIO support"
+	depends on ATH6K_LEGACY
+	help
+	Enables BT over SDIO. Applicable only for combo designs (eg: WB31)
+
+config ATH6KL_CONFIG_GPIO_BT_RESET
+	bool "Configure BT Reset GPIO"
+	depends on ATH6KL_HCI_BRIDGE
+	help
+	Configure a WLAN GPIO for use with BT.
+
+config AR600x_BT_RESET_PIN
+	int "GPIO"
+	depends on ATH6KL_CONFIG_GPIO_BT_RESET
+	default 22
+	help
+	WLAN GPIO to be used for resetting BT
+
+config ATH6KL_CFG80211
+	bool "CFG80211 support"
+	depends on ATH6K_LEGACY
+	help
+	Enables support for CFG80211 APIs. The default option is to use WEXT. Even with this option enabled, WEXT is not explicitly disabled and the onus of not exercising WEXT lies on the application(s) running in the user space.
+
+config ATH6KL_HTC_RAW_INTERFACE
+	bool "RAW HTC support"
+	depends on ATH6K_LEGACY
+	help
+	Enables raw HTC interface. Allows application to directly talk to the HTC interface via the ioctl interface
+
+config ATH6KL_VIRTUAL_SCATTER_GATHER
+	bool "Virtual Scatter-Gather support"
+	depends on ATH6K_LEGACY
+	help
+	Enables virtual scatter gather support for the hardware that does not support it natively.
+
+config ATH6KL_SKIP_ABI_VERSION_CHECK
+	bool "Skip ABI version check support"
+	depends on ATH6K_LEGACY
+	help
+	Forces the driver to disable ABI version check. Caution: Incompatilbity between the host driver and target firmware may lead to unknown side effects.
+
+config ATH6KL_BT_UART_FC_POLARITY
+	int "UART Flow Control Polarity"
+	depends on ATH6KL_LEGACY
+	default 0
+	help
+	Configures the polarity of UART Flow Control. A value of 0 implies active low and is the default setting. Set it to 1 for active high.
+
+config ATH6KL_DEBUG
+	bool "Debug support"
+	depends on ATH6K_LEGACY
+	help
+	Enables debug support
+
+config ATH6KL_ENABLE_HOST_DEBUG
+	bool "Host Debug support"
+	depends on ATH6KL_DEBUG
+	help
+	Enables debug support in the driver
+
+config ATH6KL_ENABLE_TARGET_DEBUG_PRINTS
+	bool "Target Debug support - Enable UART prints"
+	depends on ATH6KL_DEBUG
+	help
+	Enables uart prints
+
+config AR600x_DEBUG_UART_TX_PIN
+	int "GPIO"
+	depends on ATH6KL_ENABLE_TARGET_DEBUG_PRINTS
+	default 8
+	help
+	WLAN GPIO to be used for Debug UART (Tx)
+
+config ATH6KL_DISABLE_TARGET_DBGLOGS
+	bool "Target Debug support - Disable Debug logs"
+	depends on ATH6KL_DEBUG
+	help
+	Enables debug logs

drivers/staging/ath6kl/Makefile

+#------------------------------------------------------------------------------
+# Copyright (c) 2004-2010 Atheros Communications Inc.
+# All rights reserved.
+#
+# 
+#
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+#
+#
+#
+# Author(s): ="Atheros"
+#------------------------------------------------------------------------------
+
+ccflags-y += -I$(obj)/include
+ccflags-y += -I$(obj)/include/common
+ccflags-y += -I$(obj)/wlan/include
+ccflags-y += -I$(obj)/os/linux/include
+ccflags-y += -I$(obj)/os
+ccflags-y += -I$(obj)/bmi/include
+ccflags-y += -I$(obj)/include/common/AR6002/hw4.0
+
+ifeq ($(CONFIG_AR600x_SD31_XXX),y)
+ccflags-y += -DAR600x_SD31_XXX
+endif
+
+ifeq ($(CONFIG_AR600x_WB31_XXX),y)
+ccflags-y += -DAR600x_WB31_XXX
+endif
+
+ifeq ($(CONFIG_AR600x_SD32_XXX),y)
+ccflags-y += -DAR600x_SD32_XXX
+endif
+
+ifeq ($(CONFIG_AR600x_CUSTOM_XXX),y)
+ccflags-y += -DAR600x_CUSTOM_XXX
+endif
+
+ifeq ($(CONFIG_ATH6KL_ENABLE_COEXISTENCE),y)
+ccflags-y += -DENABLE_COEXISTENCE
+endif
+
+ifeq ($(CONFIG_AR600x_DUAL_ANTENNA),y)
+ccflags-y += -DAR600x_DUAL_ANTENNA
+endif
+
+ifeq ($(CONFIG_AR600x_SINGLE_ANTENNA),y)
+ccflags-y += -DAR600x_SINGLE_ANTENNA
+endif
+
+ifeq ($(CONFIG_AR600x_BT_QCOM),y)
+ccflags-y += -DAR600x_BT_QCOM
+endif
+
+ifeq ($(CONFIG_AR600x_BT_CSR),y)
+ccflags-y += -DAR600x_BT_CSR
+endif
+
+ifeq ($(CONFIG_AR600x_BT_AR3001),y)
+ccflags-y += -DAR600x_BT_AR3001
+endif
+
+ifeq ($(CONFIG_ATH6KL_HCI_BRIDGE),y)
+ccflags-y += -DATH_AR6K_ENABLE_GMBOX
+ccflags-y += -DHCI_TRANSPORT_SDIO
+ccflags-y += -DSETUPHCI_ENABLED
+ccflags-y += -DSETUPBTDEV_ENABLED
+ath6kl-y += htc2/AR6000/ar6k_gmbox.o
+ath6kl-y += htc2/AR6000/ar6k_gmbox_hciuart.o
+ath6kl-y += miscdrv/ar3kconfig.o
+ath6kl-y += miscdrv/ar3kps/ar3kpsconfig.o
+ath6kl-y += miscdrv/ar3kps/ar3kpsparser.o
+endif
+
+ifeq ($(CONFIG_ATH6KL_CONFIG_GPIO_BT_RESET),y)
+ccflags-y += -DATH6KL_CONFIG_GPIO_BT_RESET
+endif
+
+ifeq ($(CONFIG_ATH6KL_CFG80211),y)
+ccflags-y += -DATH6K_CONFIG_CFG80211
+ath6kl-y += os/linux/cfg80211.o
+endif
+
+ifeq ($(CONFIG_ATH6KL_HTC_RAW_INTERFACE),y)
+ccflags-y += -DHTC_RAW_INTERFACE
+endif
+
+ifeq ($(CONFIG_ATH6KL_ENABLE_HOST_DEBUG),y)
+ccflags-y += -DDEBUG
+ccflags-y += -DATH_DEBUG_MODULE
+endif
+
+ifeq ($(CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS),y)
+ccflags-y += -DENABLEUARTPRINT_SET
+endif
+
+ifeq ($(CONFIG_ATH6KL_DISABLE_TARGET_DBGLOGS),y)
+ccflags-y += -DATH6KL_DISABLE_TARGET_DBGLOGS
+endif
+
+ifeq ($(CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER),y)
+ccflags-y += -DATH6KL_CONFIG_HIF_VIRTUAL_SCATTER
+endif
+
+ifeq ($(CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK),y)
+ccflags-y += -DATH6KL_SKIP_ABI_VERSION_CHECK
+endif
+
+ccflags-y += -DLINUX -DKERNEL_2_6
+ccflags-y += -DTCMD
+ccflags-y += -DSEND_EVENT_TO_APP
+ccflags-y += -DUSER_KEYS
+ccflags-y += -DNO_SYNC_FLUSH
+ccflags-y += -DHTC_EP_STAT_PROFILING
+ccflags-y += -DATH_AR6K_11N_SUPPORT
+ccflags-y += -DWAPI_ENABLE
+ccflags-y += -DCHECKSUM_OFFLOAD
+ccflags-y += -DWLAN_HEADERS
+ccflags-y += -DINIT_MODE_DRV_ENABLED
+ccflags-y += -DBMIENABLE_SET
+
+obj-$(CONFIG_ATH6K_LEGACY) := ath6kl.o
+ath6kl-y += htc2/AR6000/ar6k.o
+ath6kl-y += htc2/AR6000/ar6k_events.o
+ath6kl-y += htc2/htc_send.o
+ath6kl-y += htc2/htc_recv.o
+ath6kl-y += htc2/htc_services.o
+ath6kl-y += htc2/htc.o
+ath6kl-y += bmi/src/bmi.o
+ath6kl-y += os/linux/ar6000_drv.o
+ath6kl-y += os/linux/ar6000_raw_if.o
+ath6kl-y += os/linux/ar6000_pm.o
+ath6kl-y += os/linux/netbuf.o
+ath6kl-y += os/linux/wireless_ext.o
+ath6kl-y += os/linux/ioctl.o
+ath6kl-y += os/linux/hci_bridge.o
+ath6kl-y += os/linux/ar6k_pal.o
+ath6kl-y += miscdrv/common_drv.o
+ath6kl-y += miscdrv/credit_dist.o
+ath6kl-y += wmi/wmi.o
+ath6kl-y += reorder/rcv_aggr.o
+ath6kl-y += wlan/src/wlan_node.o
+ath6kl-y += wlan/src/wlan_recv_beacon.o
+ath6kl-y += wlan/src/wlan_utils.o			 
+
+# ATH_HIF_TYPE := sdio
+ccflags-y += -I$(obj)/hif/sdio/linux_sdio/include
+ccflags-y += -DSDIO
+ath6kl-y += hif/sdio/linux_sdio/src/hif.o
+ath6kl-y += hif/sdio/linux_sdio/src/hif_scatter.o

drivers/staging/ath6kl/TODO

+- The driver is a stop-gap measure until a proper mac80211 driver is available.
+- The driver does not conform to the Linux coding style.
+- The driver has been tested on a wide variety of embedded platforms running different versions of the Linux kernel but may still have bringup/performance issues with a new platform.
+- Pls use the following link to get information about the driver's architecture, exposed APIs, supported features, limitations, testing, hardware availability and other details.
+	http://wireless.kernel.org/en/users/Drivers/ath6kl
+- Pls send any patches to
+	- Greg Kroah-Hartman <greg@kroah.com>
+	- Vipin Mehta <vmehta@atheros.com>

drivers/staging/ath6kl/bmi/include/bmi_internal.h

+//------------------------------------------------------------------------------
+// Copyright (c) 2004-2010 Atheros Communications Inc.
+// All rights reserved.
+// 
+//
+// Permission to use, copy, modify, and/or distribute this software for any
+// purpose with or without fee is hereby granted, provided that the above
+// copyright notice and this permission notice appear in all copies.
+//
+// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+//
+// Author(s): ="Atheros"
+//==============================================================================
+#ifndef BMI_INTERNAL_H
+#define BMI_INTERNAL_H
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#define ATH_MODULE_NAME bmi
+#include "a_debug.h"
+#include "AR6002/hw2.0/hw/mbox_host_reg.h"
+#include "bmi_msg.h"
+
+#define ATH_DEBUG_BMI  ATH_DEBUG_MAKE_MODULE_MASK(0)
+
+
+#define BMI_COMMUNICATION_TIMEOUT       100000
+
+/* ------ Global Variable Declarations ------- */
+static A_BOOL bmiDone;
+
+A_STATUS
+bmiBufferSend(HIF_DEVICE *device,
+              A_UCHAR *buffer,
+              A_UINT32 length);
+
+A_STATUS
+bmiBufferReceive(HIF_DEVICE *device,
+                 A_UCHAR *buffer,
+                 A_UINT32 length,
+                 A_BOOL want_timeout);
+
+#endif

drivers/staging/ath6kl/hif/common/hif_sdio_common.h

+//------------------------------------------------------------------------------
+// Copyright (c) 2009-2010 Atheros Corporation.  All rights reserved.
+// 
+//
+// Permission to use, copy, modify, and/or distribute this software for any
+// purpose with or without fee is hereby granted, provided that the above
+// copyright notice and this permission notice appear in all copies.
+//
+// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+// common header file for HIF modules designed for SDIO
+//
+// Author(s): ="Atheros"
+//==============================================================================
+
+#ifndef HIF_SDIO_COMMON_H_
+#define HIF_SDIO_COMMON_H_
+
+    /* SDIO manufacturer ID and Codes */
+#define MANUFACTURER_ID_AR6002_BASE        0x200
+#define MANUFACTURER_ID_AR6003_BASE        0x300
+#define MANUFACTURER_ID_AR6K_BASE_MASK     0xFF00
+#define FUNCTION_CLASS                     0x0
+#define MANUFACTURER_CODE                  0x271    /* Atheros */
+
+    /* Mailbox address in SDIO address space */
+#define HIF_MBOX_BASE_ADDR                 0x800
+#define HIF_MBOX_WIDTH                     0x800
+#define HIF_MBOX_START_ADDR(mbox)               \
+   ( HIF_MBOX_BASE_ADDR + mbox * HIF_MBOX_WIDTH)
+
+#define HIF_MBOX_END_ADDR(mbox)                 \
+    (HIF_MBOX_START_ADDR(mbox) + HIF_MBOX_WIDTH - 1)
+
+    /* extended MBOX address for larger MBOX writes to MBOX 0*/
+#define HIF_MBOX0_EXTENDED_BASE_ADDR       0x2800
+#define HIF_MBOX0_EXTENDED_WIDTH_AR6002    (6*1024)           
+#define HIF_MBOX0_EXTENDED_WIDTH_AR6003    (18*1024)   
+
+    /* version 1 of the chip has only a 12K extended mbox range */
+#define HIF_MBOX0_EXTENDED_BASE_ADDR_AR6003_V1  0x4000
+#define HIF_MBOX0_EXTENDED_WIDTH_AR6003_V1      (12*1024)  
+
+    /* GMBOX addresses */
+#define HIF_GMBOX_BASE_ADDR                0x7000
+#define HIF_GMBOX_WIDTH                    0x4000
+
+    /* for SDIO we recommend a 128-byte block size */
+#define HIF_DEFAULT_IO_BLOCK_SIZE          128
+
+    /* set extended MBOX window information for SDIO interconnects */
+static INLINE void SetExtendedMboxWindowInfo(A_UINT16 Manfid, HIF_DEVICE_MBOX_INFO *pInfo)
+{
+    switch (Manfid & MANUFACTURER_ID_AR6K_BASE_MASK) {                   
+        case MANUFACTURER_ID_AR6002_BASE :
+                /* MBOX 0 has an extended range */
+            pInfo->MboxProp[0].ExtendedAddress = HIF_MBOX0_EXTENDED_BASE_ADDR;             
+            pInfo->MboxProp[0].ExtendedSize = HIF_MBOX0_EXTENDED_WIDTH_AR6002;
+            break;
+        case MANUFACTURER_ID_AR6003_BASE :
+                /* MBOX 0 has an extended range */
+            pInfo->MboxProp[0].ExtendedAddress = HIF_MBOX0_EXTENDED_BASE_ADDR_AR6003_V1;             
+            pInfo->MboxProp[0].ExtendedSize = HIF_MBOX0_EXTENDED_WIDTH_AR6003_V1;
+            pInfo->GMboxAddress = HIF_GMBOX_BASE_ADDR;
+            pInfo->GMboxSize = HIF_GMBOX_WIDTH;
+            break;
+        default:
+            A_ASSERT(FALSE);
+            break;
+    }
+}
+             
+/* special CCCR (func 0) registers */
+
+#define CCCR_SDIO_IRQ_MODE_REG         0xF0        /* interrupt mode register */
+#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ   (1 << 0)    /* mode to enable special 4-bit interrupt assertion without clock*/ 
+                        
+#endif /*HIF_SDIO_COMMON_H_*/

drivers/staging/ath6kl/hif/sdio/linux_sdio/include/hif_internal.h

+//------------------------------------------------------------------------------
+// <copyright file="hif_internal.h" company="Atheros">
+//    Copyright (c) 2004-2010 Atheros Corporation.  All rights reserved.
+// 
+//
+// Permission to use, copy, modify, and/or distribute this software for any
+// purpose with or without fee is hereby granted, provided that the above
+// copyright notice and this permission notice appear in all copies.
+//
+// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+// internal header file for hif layer
+//
+// Author(s): ="Atheros"
+//==============================================================================
+#ifndef _HIF_INTERNAL_H_
+#define _HIF_INTERNAL_H_
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "hif.h"
+#include "../../../common/hif_sdio_common.h"
+#include <linux/scatterlist.h>
+#define HIF_LINUX_MMC_SCATTER_SUPPORT
+
+#define BUS_REQUEST_MAX_NUM                64
+
+#define SDIO_CLOCK_FREQUENCY_DEFAULT       25000000
+#define SDWLAN_ENABLE_DISABLE_TIMEOUT      20
+#define FLAGS_CARD_ENAB                    0x02
+#define FLAGS_CARD_IRQ_UNMSK               0x04
+
+#define HIF_MBOX_BLOCK_SIZE                HIF_DEFAULT_IO_BLOCK_SIZE
+#define HIF_MBOX0_BLOCK_SIZE               1
+#define HIF_MBOX1_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
+#define HIF_MBOX2_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
+#define HIF_MBOX3_BLOCK_SIZE               HIF_MBOX_BLOCK_SIZE
+
+struct _HIF_SCATTER_REQ_PRIV;
+
+typedef struct bus_request {
+    struct bus_request *next;       /* link list of available requests */
+    struct bus_request *inusenext;  /* link list of in use requests */
+    struct semaphore sem_req;
+    A_UINT32 address;               /* request data */
+    A_UCHAR *buffer;
+    A_UINT32 length;
+    A_UINT32 request;
+    void *context;
+    A_STATUS status;
+    struct _HIF_SCATTER_REQ_PRIV *pScatterReq;      /* this request is a scatter request */
+} BUS_REQUEST;
+
+struct hif_device {
+    struct sdio_func *func;
+    spinlock_t asynclock;
+    struct task_struct* async_task;             /* task to handle async commands */
+    struct semaphore sem_async;                 /* wake up for async task */
+    int    async_shutdown;                      /* stop the async task */
+    struct completion async_completion;          /* thread completion */
+    BUS_REQUEST   *asyncreq;                    /* request for async tasklet */
+    BUS_REQUEST *taskreq;                       /*  async tasklet data */
+    spinlock_t lock;
+    BUS_REQUEST *s_busRequestFreeQueue;         /* free list */
+    BUS_REQUEST busRequest[BUS_REQUEST_MAX_NUM]; /* available bus requests */
+    void     *claimedContext;
+    HTC_CALLBACKS htcCallbacks;
+    A_UINT8     *dma_buffer;
+    DL_LIST      ScatterReqHead;                /* scatter request list head */
+    A_BOOL       scatter_enabled;               /* scatter enabled flag */
+    A_BOOL   is_suspend;
+    A_BOOL   is_disabled;
+    atomic_t   irqHandling;
+    HIF_DEVICE_POWER_CHANGE_TYPE powerConfig;
+    const struct sdio_device_id *id;
+};
+
+#define HIF_DMA_BUFFER_SIZE (32 * 1024)
+#define CMD53_FIXED_ADDRESS 1
+#define CMD53_INCR_ADDRESS  2
+
+BUS_REQUEST *hifAllocateBusRequest(HIF_DEVICE *device);
+void hifFreeBusRequest(HIF_DEVICE *device, BUS_REQUEST *busrequest);
+void AddToAsyncList(HIF_DEVICE *device, BUS_REQUEST *busrequest);
+
+#ifdef HIF_LINUX_MMC_SCATTER_SUPPORT
+
+#define MAX_SCATTER_REQUESTS             4
+#define MAX_SCATTER_ENTRIES_PER_REQ      16
+#define MAX_SCATTER_REQ_TRANSFER_SIZE    32*1024
+
+typedef struct _HIF_SCATTER_REQ_PRIV {
+    HIF_SCATTER_REQ     *pHifScatterReq;  /* HIF scatter request with allocated entries */   
+    HIF_DEVICE          *device;          /* this device */
+    BUS_REQUEST         *busrequest;      /* request associated with request */
+        /* scatter list for linux */    
+    struct scatterlist  sgentries[MAX_SCATTER_ENTRIES_PER_REQ];   
+} HIF_SCATTER_REQ_PRIV;
+
+#define ATH_DEBUG_SCATTER  ATH_DEBUG_MAKE_MODULE_MASK(0)
+
+A_STATUS SetupHIFScatterSupport(HIF_DEVICE *device, HIF_DEVICE_SCATTER_SUPPORT_INFO *pInfo);
+void CleanupHIFScatterResources(HIF_DEVICE *device);
+A_STATUS DoHifReadWriteScatter(HIF_DEVICE *device, BUS_REQUEST *busrequest);
+
+#else  // HIF_LINUX_MMC_SCATTER_SUPPORT
+
+static inline A_STATUS SetupHIFScatterSupport(HIF_DEVICE *device, HIF_DEVICE_SCATTER_SUPPORT_INFO *pInfo) 
+{
+    return A_ENOTSUP;
+}
+
+static inline A_STATUS DoHifReadWriteScatter(HIF_DEVICE *device, BUS_REQUEST *busrequest) 
+{
+    return A_ENOTSUP;
+}
+
+#define CleanupHIFScatterResources(d) { }
+
+#endif // HIF_LINUX_MMC_SCATTER_SUPPORT
+
+#endif // _HIF_INTERNAL_H_
+

drivers/staging/ath6kl/htc2/htc_debug.h

+//------------------------------------------------------------------------------
+// <copyright file="htc_debug.h" company="Atheros">
+//    Copyright (c) 2007-2010 Atheros Corporation.  All rights reserved.
+// 
+//
+// Permission to use, copy, modify, and/or distribute this software for any
+// purpose with or without fee is hereby granted, provided that the above
+// copyright notice and this permission notice appear in all copies.
+//
+// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+// Author(s): ="Atheros"
+//==============================================================================
+#ifndef HTC_DEBUG_H_
+#define HTC_DEBUG_H_
+
+#define ATH_MODULE_NAME htc
+#include "a_debug.h"
+
+/* ------- Debug related stuff ------- */
+
+#define  ATH_DEBUG_SEND ATH_DEBUG_MAKE_MODULE_MASK(0)
+#define  ATH_DEBUG_RECV ATH_DEBUG_MAKE_MODULE_MASK(1)
+#define  ATH_DEBUG_SYNC ATH_DEBUG_MAKE_MODULE_MASK(2)
+#define  ATH_DEBUG_DUMP ATH_DEBUG_MAKE_MODULE_MASK(3)
+#define  ATH_DEBUG_IRQ  ATH_DEBUG_MAKE_MODULE_MASK(4)
+
+
+#endif /*HTC_DEBUG_H_*/

drivers/staging/ath6kl/include/a_config.h

+//------------------------------------------------------------------------------
+// <copyright file="a_config.h" company="Atheros">
+//    Copyright (c) 2004-2010 Atheros Corporation.  All rights reserved.
+// 
+//
+// Permission to use, copy, modify, and/or distribute this software for any
+// purpose with or without fee is hereby granted, provided that the above
+// copyright notice and this permission notice appear in all copies.
+//
+// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+// This file contains software configuration options that enables
+// specific software "features"
+//
+// Author(s): ="Atheros"
+//==============================================================================
+#ifndef _A_CONFIG_H_
+#define _A_CONFIG_H_
+
+#ifdef UNDER_NWIFI
+#include "../os/windows/include/config.h"
+#endif
+
+#ifdef ATHR_CE_LEGACY
+#include "../os/windows/include/config.h"
+#endif
+
+#if defined(__linux__) && !defined(LINUX_EMULATION)
+#include "../os/linux/include/config_linux.h"
+#endif
+
+#ifdef REXOS
+#include "../os/rexos/include/common/config_rexos.h"
+#endif
+
+#ifdef WIN_NWF
+#include "../os/windows/include/win/config_win.h"
+#endif
+
+#ifdef THREADX
+#include "../os/threadx/include/common/config_threadx.h"
+#endif
+
+#endif

drivers/staging/ath6kl/include/a_drv.h

+//------------------------------------------------------------------------------
+// <copyright file="a_drv.h" company="Atheros">
+//    Copyright (c) 2004-2010 Atheros Corporation.  All rights reserved.
+// 
+//
+// Permission to use, copy, modify, and/or distribute this software for any
+// purpose with or without fee is hereby granted, provided that the above
+// copyright notice and this permission notice appear in all copies.
+//
+// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+// This file contains the definitions of the basic atheros data types.
+// It is used to map the data types in atheros files to a platform specific
+// type.
+//
+// Author(s): ="Atheros"
+//==============================================================================
+#ifndef _A_DRV_H_
+#define _A_DRV_H_
+
+#if defined(__linux__) && !defined(LINUX_EMULATION)
+#include "../os/linux/include/athdrv_linux.h"
+#endif
+
+#ifdef UNDER_NWIFI
+#include "../os/windows/include/athdrv.h"
+#endif
+
+#ifdef ATHR_CE_LEGACY
+#include "../os/windows/include/athdrv.h"
+#endif
+
+#ifdef REXOS
+#include "../os/rexos/include/common/athdrv_rexos.h"
+#endif
+
+#ifdef WIN_NWF
+#include "../os/windows/include/athdrv.h"
+#endif
+
+#ifdef THREADX
+#include "../os/threadx/include/common/athdrv_threadx.h"
+#endif
+
+#endif /* _ADRV_H_ */

drivers/staging/ath6kl/include/a_osapi.h

+//------------------------------------------------------------------------------
+// <copyright file="a_osapi.h" company="Atheros">
+//    Copyright (c) 2004-2010 Atheros Corporation.  All rights reserved.
+// 
+//
+// Permission to use, copy, modify, and/or distribute this software for any
+// purpose with or without fee is hereby granted, provided that the above
+// copyright notice and this permission notice appear in all copies.
+//
+// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+//
+//
+//------------------------------------------------------------------------------
+//==============================================================================
+// This file contains the definitions of the basic atheros data types.
+// It is used to map the data types in atheros files to a platform specific
+// type.
+//
+// Author(s): ="Atheros"
+//==============================================================================
+#ifndef _A_OSAPI_H_
+#define _A_OSAPI_H_
+
+#if defined(__linux__) && !defined(LINUX_EMULATION)
+#include "../os/linux/include/osapi_linux.h"
+#endif
+
+#ifdef UNDER_NWIFI
+#include "../os/windows/include/osapi.h"
+#include "../os/windows/include/netbuf.h"
+#endif
+
+#ifdef ATHR_CE_LEGACY
+#include "../os/windows/include/osapi.h"
+#include "../os/windows/include/netbuf.h"
+#endif
+
+#ifdef REXOS
+#include "../os/rexos/include/common/osapi_rexos.h"
+#endif
+
+#if defined ART_WIN
+#include "../os/win_art/include/osapi_win.h"
+#include "../os/win_art/include/netbuf.h"
+#endif
+
+#ifdef WIN_NWF
+#include <osapi_win.h>
+#endif 
+
+#if defined(THREADX)
+#include "../os/threadx/include/common/osapi_threadx.h"
+#endif 
+
+#endif /* _OSAPI_H_ */

drivers/staging/ath6kl/include/common/AR6002/hw2.0/hw

+../hw.0
\ No newline at end of file