Commit 306380dc authored by Johan Hovold's avatar Johan Hovold Committed by Bjorn Andersson

arm64: dts: qcom: sm8450-hdk: move wcd938x codec node

The wcd938x codec is not a memory-mapped device and does not belong
under the soc node.

Move the node to the root node to avoid DT validation failures.

While at it, clean up the node somewhat by reordering properties and
renaming it 'audio-codec'.
Signed-off-by: default avatarJohan Hovold <johan+linaro@kernel.org>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-6-johan+linaro@kernel.org
parent fdc6a0b2
......@@ -24,6 +24,32 @@ aliases {
serial0 = &uart7;
};
wcd938x: audio-codec {
compatible = "qcom,wcd9380-codec";
pinctrl-names = "default";
pinctrl-0 = <&wcd_default>;
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
vdd-buck-supply = <&vreg_s10b_1p8>;
vdd-rxtx-supply = <&vreg_s10b_1p8>;
vdd-io-supply = <&vreg_s10b_1p8>;
vdd-mic-bias-supply = <&vreg_bob>;
#sound-dai-cells = <1>;
};
chosen {
stdout-path = "serial0:115200n8";
};
......@@ -519,33 +545,6 @@ &sdhc_2 {
status = "okay";
};
&soc {
wcd938x: codec {
compatible = "qcom,wcd9380-codec";
pinctrl-names = "default";
pinctrl-0 = <&wcd_default>;
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <1>;
vdd-buck-supply = <&vreg_s10b_1p8>;
vdd-rxtx-supply = <&vreg_s10b_1p8>;
vdd-io-supply = <&vreg_s10b_1p8>;
vdd-mic-bias-supply = <&vreg_bob>;
};
};
&sound {
compatible = "qcom,sm8450-sndcard";
model = "SM8450-HDK";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment