Commit 3069ce62 authored by Sean Nyekjaer's avatar Sean Nyekjaer Committed by Marc Kleine-Budde

can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before register access

The m_can tries to detect if Non ISO Operation is available while in
standby mode, this function results in the following error:

| tcan4x5x spi2.0 (unnamed net_device) (uninitialized): Failed to init module
| tcan4x5x spi2.0: m_can device registered (irq=84, version=32)
| tcan4x5x spi2.0 can2: TCAN4X5X successfully initialized.

When the tcan device comes out of reset it goes in standby mode. The
m_can driver tries to access the control register but fails due to the
device being in standby mode.

So this patch will put the tcan device in normal mode before the m_can
driver does the initialization.

Fixes: 5443c226 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarSean Nyekjaer <sean@geanix.com>
Acked-by: default avatarDan Murphy <dmurphy@ti.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent 738d2902
......@@ -457,6 +457,10 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
tcan4x5x_power_enable(priv->power, 1);
ret = tcan4x5x_init(mcan_class);
if (ret)
goto out_power;
ret = m_can_class_register(mcan_class);
if (ret)
goto out_power;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment