Commit 30b233b1 authored by Enric Balletbo i Serra's avatar Enric Balletbo i Serra Committed by Mark Brown

ASoC: rk3399_gru_sound: Support 32, 44.1 and 88.2 kHz sample rates

According to the datasheet the max98357a also supports 32, 44.1 and
88.2 kHz sample rate. This support was also introduced recently by
commit fdf34366 ("ASoC: max98357a: add missing supported rates").

Actually the machine driver validates the supported sample rates but
this is not really needed because the component driver can all apply
whatever constraints are needed and do their own validation. So, remove
the checks from the machine driver as are not needed at all. This way,
we also support 32, 44.1 and 88.2 kHz sample rates and we get rid of the
errors like the below.

  rk3399-gru-sound sound: rockchip_sound_max98357a_hw_params() doesn't support this sample rate: 44100
  rk3399-gru-sound sound: ASoC: machine hw_params failed: -22
Signed-off-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent b9f2e25c
...@@ -66,19 +66,7 @@ static int rockchip_sound_max98357a_hw_params(struct snd_pcm_substream *substrea ...@@ -66,19 +66,7 @@ static int rockchip_sound_max98357a_hw_params(struct snd_pcm_substream *substrea
unsigned int mclk; unsigned int mclk;
int ret; int ret;
/* max98357a supports these sample rates */ mclk = params_rate(params) * SOUND_FS;
switch (params_rate(params)) {
case 8000:
case 16000:
case 48000:
case 96000:
mclk = params_rate(params) * SOUND_FS;
break;
default:
dev_err(rtd->card->dev, "%s() doesn't support this sample rate: %d\n",
__func__, params_rate(params));
return -EINVAL;
}
ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, 0, mclk, 0); ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, 0, mclk, 0);
if (ret) { if (ret) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment