Merge bk://linux-ntfs.bkbits.net/ntfs-tng-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

Documentation/DocBook/Makefile

@@ -2,7 +2,7 @@ BOOKS	:= wanbook.sgml z8530book.sgml mcabook.sgml videobook.sgml \
 	   kernel-api.sgml parportbook.sgml kernel-hacking.sgml \
 	   kernel-locking.sgml via-audio.sgml mousedrivers.sgml sis900.sgml \
 	   deviceiobook.sgml procfs-guide.sgml tulip-user.sgml \
-	   writing_usb_driver.sgml
+	   writing_usb_driver.sgml scsidrivers.sgml
 
 PS	:=	$(patsubst %.sgml, %.ps, $(BOOKS))
 PDF	:=	$(patsubst %.sgml, %.pdf, $(BOOKS))
@@ -69,6 +69,9 @@ tulip-user.sgml: tulip-user.tmpl
 writing_usb_driver.sgml: writing_usb_driver.tmpl
 	$(TOPDIR)/scripts/docgen <$< >$@
 
+scsidrivers.sgml : scsidrivers.tmpl
+	$(TOPDIR)/scripts/docgen <$< >$@
+
 sis900.sgml: sis900.tmpl $(TOPDIR)/drivers/net/sis900.c
 	$(TOPDIR)/scripts/docgen $(TOPDIR)/drivers/net/sis900.c \
 		<sis900.tmpl >sis900.sgml

Documentation/DocBook/scsidrivers.tmpl

+<!-- -*- sgml -*- -->
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN"[]>
+
+<book id="scsidrivers">
+ <bookinfo>
+  <title>SCSI Subsystem Interfaces</title>
+  
+  <authorgroup>
+   <author>
+    <firstname>Douglas</firstname>
+    <surname>Gilbert</surname>
+    <affiliation>
+     <address>
+      <email>dgilbert@interlog.com</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+  <pubdate>2002-04-27</pubdate>
+
+  <copyright>
+   <year>2002</year>
+   <holder>Douglas Gilbert</holder>
+  </copyright>
+  <legalnotice>
+   <para>
+    Permission is granted to copy, distribute and/or modify this
+    document under the terms of the GNU Free Documentation License,
+    Version 1.1 or any later version published by the Free Software
+    Foundation; with no Invariant Sections, with no Front-Cover Texts,
+    and with no Back-Cover Texts.  A copy of the license is included
+    in the section entitled "GNU Free Documentation License".
+   </para>
+  </legalnotice>
+
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="intro">
+      <title>Introduction</title>
+  <para>
+This document outlines the interface between the Linux scsi mid level
+and lower level drivers. Lower level drivers are variously called HBA
+(host bus adapter) drivers, host drivers (HD) or pseudo adapter drivers.
+The latter alludes to the fact that a lower level driver may be a
+bridge to another IO subsystem (and the "ide-scsi" driver is an example
+of this). There can be many lower level drivers active in a running
+system, but only one per hardware type. For example, the aic7xxx driver
+controls adaptec controllers based on the 7xxx chip series. Most lower
+level drivers can control one or more scsi hosts (a.k.a. scsi initiators).
+  </para>
+<para>
+This document can been found in an ASCII text file in the linux kernel 
+source: <filename>drivers/scsi/scsi_mid_low_api.txt</filename> .
+It currently hold a little more information than this document. The
+<filename>drivers/scsi/hosts.h</filename> and <filename>
+drivers/scsi/scsi.h</filename> headers contain descriptions of members
+of important structures for the scsi subsystem.
+</para>
+  </chapter>
+
+  <chapter id="driver_struct">
+      <title>Driver structure</title>
+  <para>
+Traditionally a lower level driver for the scsi subsystem has been
+at least two files in the drivers/scsi directory. For example, a
+driver called "xyz" has a header file "xyz.h" and a source file
+"xyz.c". [Actually there is no good reason why this couldn't all
+be in one file.] Some drivers that have been ported to several operating
+systems (e.g. aic7xxx which has separate  files for generic and
+OS-specific code) have more than two files. Such drivers tend to have
+their own directory under the drivers/scsi directory.
+  </para>
+  <para>
+scsi_module.c is normally included at the end of a lower
+level driver. For it to work a declaration like this is needed before
+it is included:
+<programlisting>
+    static Scsi_Host_Template driver_template = DRIVER_TEMPLATE;
+    /* DRIVER_TEMPLATE should contain pointers to supported interface
+       functions. Scsi_Host_Template is defined hosts.h */
+    #include "scsi_module.c"
+</programlisting>
+  </para>
+  <para>
+The scsi_module.c assumes the name "driver_template" is appropriately
+defined. It contains 2 functions:
+<orderedlist>
+<listitem><para>
+     init_this_scsi_driver() called during builtin and module driver
+     initialization: invokes mid level's scsi_register_host()
+</para></listitem>
+<listitem><para>
+     exit_this_scsi_driver() called during closedown: invokes
+     mid level's scsi_unregister_host()
+</para></listitem>
+</orderedlist>
+  </para>
+<para>
+When a new, lower level driver is being added to Linux, the following 
+files (all found in the drivers/scsi directory) will need some attention: 
+Makefile, Config.help and Config.in . It is probably best to look at what 
+an existing lower level driver does in this regard.
+</para>
+  </chapter>
+
+  <chapter id="intfunctions">
+     <title>Interface Functions</title>
+!Edrivers/scsi/scsi_mid_low_api.txt
+  </chapter>
+
+  <chapter id="locks">
+     <title>Locks</title>
+<para>
+Each Scsi_Host instance has a spin_lock called Scsi_Host::default_lock
+which is initialized in scsi_register() [found in hosts.c]. Within the
+same function the Scsi_Host::host_lock pointer is initialized to point
+at default_lock with the scsi_assign_lock() function. Thereafter
+lock and unlock operations performed by the mid level use the
+Scsi_Host::host_lock pointer.
+</para>
+<para>
+Lower level drivers can override the use of Scsi_Host::default_lock by
+using scsi_assign_lock(). The earliest opportunity to do this would
+be in the detect() function after it has invoked scsi_register(). It
+could be replaced by a coarser grain lock (e.g. per driver) or a
+lock of equal granularity (i.e. per host). Using finer grain locks
+(e.g. per scsi device) may be possible by juggling locks in
+queuecommand().
+</para>
+  </chapter>
+
+  <chapter id="changes">
+     <title>Changes since lk 2.4 series</title>
+<para>
+io_request_lock has been replaced by several finer grained locks. The lock
+relevant to lower level drivers is Scsi_Host::host_lock and there is one
+per scsi host.
+</para>
+<para>
+The older error handling mechanism has been removed. This means the
+lower level interface functions abort() and reset() have been removed.
+</para>
+<para>
+In the 2.4 series the scsi subsystem configuration descriptions were
+aggregated with the configuration descriptions from all other Linux
+subsystems in the Documentation/Configure.help file. In the 2.5 series,
+the scsi subsystem now has its own (much smaller) drivers/scsi/Config.help
+file.
+</para>
+  </chapter>
+
+  <chapter id="credits">
+     <title>Credits</title>
+<para>
+The following people have contributed to this document:
+<orderedlist>
+<listitem><para>
+Mike Anderson <email>andmike@us.ibm.com</email>
+</para></listitem>
+<listitem><para>
+James Bottomley <email>James.Bottomley@steeleye.com</email>
+</para></listitem>
+<listitem><para>
+Patrick Mansfield <email>patmans@us.ibm.com</email>
+</para></listitem>
+</orderedlist>
+</para>
+  </chapter>
+
+</book>

Documentation/filesystems/Locking

@@ -69,10 +69,10 @@ setattr:	no	yes
 permission:	yes	no
 getattr:				(see below)
 revalidate:	no			(see below)
-setxattr:	yes	no
-getxattr:	yes	no
-listxattr:	yes	no
-removexattr:	yes	no
+setxattr:	no	yes
+getxattr:	no	yes
+listxattr:	no	yes
+removexattr:	no	yes
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_sem on
 victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.

Documentation/filesystems/porting

@@ -81,13 +81,20 @@ can relax your locking.
 [mandatory]
 
 ->lookup(), ->truncate(), ->create(), ->unlink(), ->mknod(), ->mkdir(),
-->rmdir(), ->link(), ->lseek(), ->symlink() and ->rename() are called
-without BKL now.  Grab it on the entry, drop upon return - that will
-guarantee the same locking you used to have.  If your method or its
+->rmdir(), ->link(), ->lseek(), ->symlink(), ->rename() and ->readdir() 
+are called without BKL now.  Grab it on the entry, drop upon return - that 
+will guarantee the same locking you used to have.  If your method or its
 parts do not need BKL - better yet, now you can shift lock_kernel() and
 unlock_kernel() so that they would protect exactly what needs to be
 protected.
 
+---
+[mandatory]
+
+BKL is also moved from around sb operations.  ->write_super() Is now called 
+without BKL held.  BKL should have been shifted into individual fs sb_op
+functions.  If you don't need it, remove it.  
+
 ---
 [informational]
 

Documentation/sonypi.txt

@@ -43,7 +43,7 @@ Several options can be passed to the sonypi driver, either by adding them
 to /etc/modules.conf file, when the driver is compiled as a module or by
 adding the following to the kernel command line (in your bootloader):
 
-	sonypi=minor[[[[,camera],fnkeyinit],verbose],compat]
+	sonypi=minor[[[[[,camera],fnkeyinit],verbose],compat],nojogdial]
 
 where:
 
@@ -71,6 +71,9 @@ where:
 			(prior to version 1.5) and does not work anymore,
 			add this option and report to the author.
 
+	nojogdial:	gives more accurate PKEY events on those Vaio models
+			which don't have a jogdial (like the FX series).
+
 Module use:
 -----------
 

MAINTAINERS

@@ -556,9 +556,9 @@ L:	ext3-users@redhat.com
 S:	Maintained
 
 FARSYNC SYNCHRONOUS DRIVER
-P:	Bob Dunlop
-M:	rjd@xyzzy.clara.co.uk
-M:	bob.dunlop@farsite.co.uk
+P:	Kevin Curtis
+M:	kevin.curtis@farsite.co.uk
+M:	kevin.curtis@farsite.co.uk
 W:	http://www.farsite.co.uk/
 S:	Supported
 
@@ -737,16 +737,12 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 IEEE 1394 SUBSYSTEM
-P:	Andreas Bombe
-M:	andreas.bombe@munich.netsurf.de
+P:	Ben Collins
+M:	bcollins@debian.org
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://linux1394.sourceforge.net/
 S:	Maintained
 
-IEEE 1394 AIC5800 DRIVER
-L:	linux1394-devel@lists.sourceforge.net
-S:	Orphan
-
 IEEE 1394 OHCI DRIVER
 P:	Ben Collins
 M:	bcollins@debian.org
@@ -801,6 +797,12 @@ W:	http://www.inter-mezzo.org/
 L:	intermezzo-discuss@lists.sourceforge.net
 S:	Maintained
 
+IOC3 DRIVER
+P:	Ralf Baechle
+M:	ralf@oss.sgi.com
+L:	linux-mips@oss.sgi.com
+S:	Maintained
+
 IP MASQUERADING:
 P:	Juanjo Ciarlante
 M:	jjciarla@raiz.uncu.edu.ar
@@ -935,6 +937,13 @@ W:	http://www.linuxppc.org/
 L:	linuxppc-dev@lists.linuxppc.org
 S:	Maintained
 
+LINUX FOR 64BIT POWERPC
+P:	David Engebretsen
+M:	engebret@us.ibm.com
+W:	http://linuxppc64.org
+L:	linuxppc64-dev@lists.linuxppc.org
+S:	Supported
+
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP Dynamic Disks)
 P:	Richard Russon (FlatCap)
 M:	ldm@flatcap.org
@@ -1198,8 +1207,10 @@ L:	linux-abi-devel@lists.sourceforge.net
 S:	Maintained
 
 PCI ID DATABASE
-P:	Jens Maurer
-M:	jmaurer@cck.uni-kl.de
+P:	Martin Mares
+M:	mj@ucw.cz
+L:	pciids-devel@lists.sourceforge.net
+W:	http://pciids.sourceforge.net/
 S:	Maintained
 
 PCI SOUND DRIVERS (ES1370, ES1371 and SONICVIBES)
@@ -1387,11 +1398,11 @@ M:	mingo@redhat.com
 S:	Maintained
 
 SIS 5513 IDE CONTROLLER DRIVER
-P:      Lionel Bouton
-M:      Lionel.Bouton@inet6.fr
-W:      http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
-W:      http://gyver.homeip.net/sis5513/index.html
-S:      Maintained
+P:	Lionel Bouton
+M:	Lionel.Bouton@inet6.fr
+W:	http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
+W:	http://gyver.homeip.net/sis5513/index.html
+S:	Maintained
 
 SIS 900/7016 FAST ETHERNET DRIVER
 P:	Ollie Lho
@@ -1508,26 +1519,24 @@ M:	hch@infradead.org
 S:	Maintained
 
 TI GRAPH LINK USB (SilverLink) CABLE DRIVER
-P:     Romain Lievin
-M:     roms@lpg.ticalc.org
-P:     Julien Blache
-M:     jb@technologeek.org
-S:     Maintained
+P:	Romain Lievin
+M:	roms@lpg.ticalc.org
+P:	Julien Blache
+M:	jb@technologeek.org
+S:	Maintained
 
 TIEMAN VOYAGER USB BRAILLE DISPLAY DRIVER
-P:      Stephane Dalton
-M:      sdalton@videotron.ca
-P:      Stphane Doyon
-M:      s.doyon@videotron.ca
-S:      Maintained
+P:	Stephane Dalton
+M:	sdalton@videotron.ca
+P:	Stphane Doyon
+M:	s.doyon@videotron.ca
+S:	Maintained
 
 TLAN NETWORK DRIVER
-P:	Torben Mathiasen
-M:	torben.mathiasen@compaq.com
-M:	torben@kernel.dk
-L:	tlan@vuser.vu.union.edu
-L:	linux-net@vger.kernel.org
-W:	http://tlan.kernel.dk
+P:	Samuel Chessman
+M:	chessman@tux.org
+L:	tlan-devel@lists.sourceforge.net
+W:	http://sourceforge.net/projects/tlan/
 S:	Maintained
 
 TOKEN-RING NETWORK DRIVER
@@ -1629,6 +1638,12 @@ M:	dbrownell@users.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
 S:	Maintained
 
+USB EHCI DRIVER
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb-devel@lists.sourceforge.net
+S:	Maintained
+
 USB HID/HIDBP/INPUT DRIVERS
 P:	Vojtech Pavlik
 M:	vojtech@suse.cz
@@ -1731,7 +1746,7 @@ S:	Maintained
 USB SERIAL CYBERJACK PINPAD/E-COM DRIVER
 L:	linux-usb-users@lists.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
-S:	Supported
+S:	Maintained
 
 USB AUERSWALD DRIVER
 P:	Wolfgang Muees

arch/arm/boot/compressed/head-shark.S

@@ -38,7 +38,7 @@ __beginning:	mov	r4, r0				@ save the entry to the firmware
 		adr	r1, __ofw_data
 		add	r2, r1, #4
 		mov	lr, pc
-		b	SYMBOL_NAME(ofw_init)
+		b	ofw_init
 		mov	r1, #0
 
 		adr	r2, __mmu_off			@ calculate physical address
@@ -109,7 +109,7 @@ __go_on:
 		add	sp, sp, #128
 		adr	r0, __ofw_data
 		mov	lr, pc
-		b	SYMBOL_NAME(create_params)
+		b	create_params
 	
 		mov	r8, #0
 		mov	r7, #15

arch/arm/boot/compressed/head.S

@@ -185,7 +185,7 @@ not_relocated:	mov	r0, #0
 		mov	r5, r2			@ decompress after malloc space
 		mov	r0, r5
 		mov	r3, r7
-		bl	SYMBOL_NAME(decompress_kernel)
+		bl	decompress_kernel
 
 		add	r0, r0, #127
 		bic	r0, r0, #127		@ align the kernel length
@@ -219,7 +219,7 @@ not_relocated:	mov	r0, #0
  */
 wont_overwrite:	mov	r0, r4
 		mov	r3, r7
-		bl	SYMBOL_NAME(decompress_kernel)
+		bl	decompress_kernel
 		b	call_kernel
 
 		.type	LC0, #object

arch/arm/boot/compressed/ll_char_wr.S

@@ -27,10 +27,10 @@
 #define FLASH           0x08
 #define INVERSE         0x10
 
-LC0:		.word	SYMBOL_NAME(bytes_per_char_h)
-		.word	SYMBOL_NAME(video_size_row)
-		.word	SYMBOL_NAME(acorndata_8x8)
-		.word	SYMBOL_NAME(con_charconvtable)
+LC0:		.word	bytes_per_char_h
+		.word	video_size_row
+		.word	acorndata_8x8
+		.word	con_charconvtable
 
 ENTRY(ll_write_char)
 		stmfd	sp!, {r4 - r7, lr}

arch/arm/kernel/entry-armo.S

@@ -147,7 +147,7 @@ _unexp_fiq:	ldr	sp, .LCfiq
 		mov	r0, r0
 		stmfd	sp!, {r0 - r3, ip, lr}
 		adr	r0, Lfiqmsg
-		bl	SYMBOL_NAME(printk)
+		bl	printk
 		ldmfd	sp!, {r0 - r3, ip, lr}
 		teqp	pc, #0x0c000001
 		mov	r0, r0
@@ -174,12 +174,12 @@ vector_undefinstr:
 		ldr	r4, .LC2
 		ldr	pc, [r4]			@ Call FP module USR entry point
 
-		.globl	SYMBOL_NAME(fpundefinstr)
-SYMBOL_NAME(fpundefinstr):				@ Called by FP module on undefined instr
+		.globl	fpundefinstr
+fpundefinstr:						@ Called by FP module on undefined instr
 		mov	r0, lr
 		mov	r1, sp
 		teqp	pc, #MODE_SVC
-		bl	SYMBOL_NAME(do_undefinstr)
+		bl	do_undefinstr
 		b	ret_from_exception		@ Normal FP exit
 
 __und_svc:	SVC_SAVE_ALL				@ Non-user mode
@@ -187,7 +187,7 @@ __und_svc:	SVC_SAVE_ALL				@ Non-user mode
 		and	r2, lr, #3
 		sub	r0, r0, #4
 		mov	r1, sp
-		bl	SYMBOL_NAME(do_undefinstr)
+		bl	do_undefinstr
 		SVC_RESTORE_ALL
 
 #if defined CONFIG_FPE_NWFPE || defined CONFIG_FPE_FASTFPE
@@ -232,7 +232,7 @@ wfs_mask_data:	.word	0x0e200110			@ WFS/RFS
 		.word	0x0f0f0f00
 #endif
 
-.LC2:		.word	SYMBOL_NAME(fp_enter)
+.LC2:		.word	fp_enter
 
 /*=============================================================================
  * Prefetch abort handler
@@ -247,12 +247,12 @@ vector_prefetch:
 		teqp	pc, #0x00000003		@ NOT a problem - doesnt change mode
 		mask_pc	r0, lr			@ Address of abort
 		mov	r1, sp			@ Tasks registers
-		bl	SYMBOL_NAME(do_PrefetchAbort)
+		bl	do_PrefetchAbort
 		teq	r0, #0			@ If non-zero, we believe this abort..
 		bne	ret_from_exception
 #ifdef DEBUG_UNDEF
 		adr	r0, t
-		bl	SYMBOL_NAME(printk)
+		bl	printk
 #endif
 		ldr	lr, [sp,#S_PC]		@ program to test this on.  I think its
 		b	.Lbug_undef		@ broken at the moment though!)
@@ -261,7 +261,7 @@ __pabt_invalid:	SVC_SAVE_ALL
 		mov	r0, sp				@ Prefetch aborts are definitely *not*
 		mov	r1, #BAD_PREFETCH		@ allowed in non-user modes.  We cant
 		and	r2, lr, #3			@ recover from this problem.
-		b	SYMBOL_NAME(bad_mode)
+		b	bad_mode
 
 #ifdef DEBUG_UNDEF
 t:		.ascii "*** undef ***\r\n\0"
@@ -287,7 +287,7 @@ vector_addrexcptn:
 		mov	r1, sp			@ Point to registers
 		mov	r2, #0x400
 		mov	lr, pc
-		bl	SYMBOL_NAME(do_excpt)
+		bl	do_excpt
 		b	ret_from_exception
 
 Laddrexcptn_not_user:
@@ -299,7 +299,7 @@ Laddrexcptn_not_user:
 		mask_pc	r0, lr
 		mov	r1, sp
 		orr	r2, r2, #0x400
-		bl	SYMBOL_NAME(do_excpt)
+		bl	do_excpt
 		ldmia	sp, {r0 - lr}		@ I cant remember the reason I changed this...
 		add	sp, sp, #15*4
 		movs	pc, lr
@@ -324,7 +324,7 @@ Laddrexcptn_illegal_mode:
 		stmfd	sp!, {r0-r7}
 		mov	r0, sp
 		mov	r1, #BAD_ADDREXCPTN
-		b	SYMBOL_NAME(bad_mode)
+		b	bad_mode
 
 /*=============================================================================
  * Interrupt (IRQ) handler
@@ -382,7 +382,7 @@ __irq_svc:	teqp	pc, #0x08000003
 
 __irq_invalid:	mov	r0, sp
 		mov	r1, #BAD_IRQ
-		b	SYMBOL_NAME(bad_mode)
+		b	bad_mode
 
 /*=============================================================================
  * Data abort handler code
@@ -418,7 +418,7 @@ Ldata_not_user:
 Ldata_illegal_mode:
 		mov	r0, sp
 		mov	r1, #BAD_DATA
-		b	SYMBOL_NAME(bad_mode)
+		b	bad_mode
 
 Ldata_do:	mov	r3, sp
 		ldr	r4, [r0]		@ Get instruction
@@ -460,7 +460,7 @@ Ldata_ldrstr_post:
 #ifdef FAULT_CODE_LDRSTRPOST
 		orr	r2, r2, #FAULT_CODE_LDRSTRPOST
 #endif
-		b	SYMBOL_NAME(do_DataAbort)
+		b	do_DataAbort
 
 Ldata_ldrstr_numindex:
 		mov	r0, r4, lsr #14		@ Get Rn
@@ -476,7 +476,7 @@ Ldata_ldrstr_numindex:
 #ifdef FAULT_CODE_LDRSTRPRE
 		orr	r2, r2, #FAULT_CODE_LDRSTRPRE
 #endif
-		b	SYMBOL_NAME(do_DataAbort)
+		b	do_DataAbort
 
 Ldata_ldrstr_regindex:
 		mov	r0, r4, lsr #14		@ Get Rn
@@ -506,7 +506,7 @@ Ldata_ldrstr_regindex:
 #ifdef FAULT_CODE_LDRSTRREG
 		orr	r2, r2, #FAULT_CODE_LDRSTRREG
 #endif
-		b	SYMBOL_NAME(do_DataAbort)
+		b	do_DataAbort
 
 Ldata_ldmstm:
 		mov	r7, #0x11
@@ -543,7 +543,7 @@ Ldata_ldmstm:
 #ifdef FAULT_CODE_LDMSTM
 		orr	r2, r2, #FAULT_CODE_LDMSTM
 #endif
-		b	SYMBOL_NAME(do_DataAbort)
+		b	do_DataAbort
 
 Ldata_ldcstc_pre:
 		mov	r0, r4, lsr #14		@ Get Rn
@@ -559,7 +559,7 @@ Ldata_ldcstc_pre:
 #ifdef FAULT_CODE_LDCSTC
 		orr	r2, r2, #FAULT_CODE_LDCSTC
 #endif
-		b	SYMBOL_NAME(do_DataAbort)
+		b	do_DataAbort
 
 
 /*

arch/arm/kernel/entry-armv.S

@@ -653,7 +653,7 @@ __und_invalid:	sub	sp, sp, #S_FRAME_SIZE
 		stmia	r4, {r5 - r7}			@ Save XXX pc, cpsr, old_r0
 		mov	r0, sp
 		and	r2, r6, #31			@ int mode
-		b	SYMBOL_NAME(bad_mode)
+		b	bad_mode
 
 #if defined CONFIG_FPE_NWFPE || defined CONFIG_FPE_FASTFPE
 		/* The FPE is always present */
@@ -725,7 +725,7 @@ __dabt_svc:	sub	sp, sp, #S_FRAME_SIZE
 #endif
 		msr	cpsr_c, r9
 		mov	r2, sp
-		bl	SYMBOL_NAME(do_DataAbort)
+		bl	do_DataAbort
 		set_cpsr_c r0, #PSR_I_BIT | MODE_SVC
 		ldr	r0, [sp, #S_PSR]
 		msr	spsr, r0
@@ -778,7 +778,7 @@ svc_preempt:	teq	r9, #0				@ was preempt count = 0
 		mov	r7, #PREEMPT_ACTIVE
 		str	r7, [r8, #TI_PREEMPT]		@ set PREEMPT_ACTIVE
 1:		set_cpsr_c r2, #MODE_SVC		@ enable IRQs
-		bl	SYMBOL_NAME(schedule)
+		bl	schedule
 		set_cpsr_c r0, #PSR_I_BIT | MODE_SVC	@ disable IRQs
 		ldr	r0, [r8, #TI_FLAGS]		@ get new tasks TI_FLAGS
 		tst	r0, #_TIF_NEED_RESCHED
@@ -801,7 +801,7 @@ __und_svc:	sub	sp, sp, #S_FRAME_SIZE
 
 		mov	r0, r5				@ unsigned long pc
 		mov	r1, sp				@ struct pt_regs *regs
-		bl	SYMBOL_NAME(do_undefinstr)
+		bl	do_undefinstr
 
 1:		set_cpsr_c r0, #PSR_I_BIT | MODE_SVC
 		ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
@@ -823,7 +823,7 @@ __pabt_svc:	sub	sp, sp, #S_FRAME_SIZE
 		msr	cpsr_c, r9
 		mov	r0, r2				@ address (pc)
 		mov	r1, sp				@ regs
-		bl	SYMBOL_NAME(do_PrefetchAbort)	@ call abort handler
+		bl	do_PrefetchAbort		@ call abort handler
 		set_cpsr_c r0, #PSR_I_BIT | MODE_SVC
 		ldr	r0, [sp, #S_PSR]
 		msr	spsr, r0
@@ -834,11 +834,11 @@ __pabt_svc:	sub	sp, sp, #S_FRAME_SIZE
 .LCund:		.word	__temp_und
 .LCabt:		.word	__temp_abt
 #ifdef MULTI_ABORT
-.LCprocfns:	.word	SYMBOL_NAME(processor)
+.LCprocfns:	.word	processor
 #endif
-.LCfp:		.word	SYMBOL_NAME(fp_enter)
+.LCfp:		.word	fp_enter
 #ifdef CONFIG_PREEMPT
-.LCirq_stat:	.word	SYMBOL_NAME(irq_stat)
+.LCirq_stat:	.word	irq_stat
 #endif
 
 		irq_prio_table
@@ -867,7 +867,7 @@ __dabt_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
 		set_cpsr_c r2, #MODE_SVC		@ Enable interrupts
 		mov	r2, sp
 		adrsvc	al, lr, ret_from_exception
-		b	SYMBOL_NAME(do_DataAbort)
+		b	do_DataAbort
 
 		.align	5
 __irq_usr:	sub	sp, sp, #S_FRAME_SIZE
@@ -929,7 +929,7 @@ fpundefinstr:	set_cpsr_c r0, #MODE_SVC		@ Enable interrupts
 		mov	r0, lr
 		mov	r1, sp
 		adrsvc	al, lr, ret_from_exception
-		b	SYMBOL_NAME(do_undefinstr)
+		b	do_undefinstr
 
 		.align	5
 __pabt_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
@@ -944,7 +944,7 @@ __pabt_usr:	sub	sp, sp, #S_FRAME_SIZE		@ Allocate frame size in one go
 		set_cpsr_c r0, #MODE_SVC		@ Enable interrupts
 		mov	r0, r5				@ address (pc)
 		mov	r1, sp				@ regs
-		bl	SYMBOL_NAME(do_PrefetchAbort)	@ call abort handler
+		bl	do_PrefetchAbort		@ call abort handler
 		/* fall through */
 /*
  * This is the return code to user mode for abort handlers
@@ -1230,9 +1230,9 @@ __temp_abt:	.word	0				@ Saved lr_abt
 		.word	0				@ Saved spsr_abt
 		.word	-1				@ old_r0
 
-		.globl	SYMBOL_NAME(cr_alignment)
-		.globl	SYMBOL_NAME(cr_no_alignment)
-SYMBOL_NAME(cr_alignment):
+		.globl	cr_alignment
+		.globl	cr_no_alignment
+cr_alignment:
 		.space	4
-SYMBOL_NAME(cr_no_alignment):
+cr_no_alignment:
 		.space	4

arch/arm/kernel/entry-common.S

@@ -49,7 +49,7 @@ ret_fast_work:
 	b	work_pending
 
 work_resched:
-	bl	SYMBOL_NAME(schedule)
+	bl	schedule
 /*
  * "slow" syscall return path.  "why" tells us if this was a real syscall.
  */
@@ -70,7 +70,7 @@ no_work_pending:
 __do_notify_resume:
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
-	b	SYMBOL_NAME(do_notify_resume)	@ note the bl above sets lr
+	b	do_notify_resume		@ note the bl above sets lr
 
 /*
  * This is how we return from a fork.
@@ -86,7 +86,7 @@ ENTRY(ret_from_fork)
 	beq	ret_slow_syscall
 	mov	r1, sp
 	mov	r0, #1				@ trace exit [IP = 1]
-	bl	SYMBOL_NAME(syscall_trace)
+	bl	syscall_trace
 	b	ret_slow_syscall
 	
 
@@ -154,8 +154,8 @@ ENTRY(vector_swi)
 2:	mov	why, #0				@ no longer a real syscall
 	cmp	scno, #ARMSWI_OFFSET
 	eor	r0, scno, #OS_NUMBER << 20	@ put OS number back
-	bcs	SYMBOL_NAME(arm_syscall)	
-	b	SYMBOL_NAME(sys_ni_syscall)	@ not private func
+	bcs	arm_syscall	
+	b	sys_ni_syscall			@ not private func
 
 	/*
 	 * This is the really slow path.  We're going to be doing
@@ -164,7 +164,7 @@ ENTRY(vector_swi)
 __sys_trace:
 	add	r1, sp, #S_OFF
 	mov	r0, #0				@ trace entry [IP = 0]
-	bl	SYMBOL_NAME(syscall_trace)
+	bl	syscall_trace
 
 	adrsvc	al, lr, __sys_trace_return	@ return address
 	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
@@ -177,14 +177,14 @@ __sys_trace_return:
 	str	r0, [sp, #S_R0 + S_OFF]!	@ save returned r0
 	mov	r1, sp
 	mov	r0, #1				@ trace exit [IP = 1]
-	bl	SYMBOL_NAME(syscall_trace)
+	bl	syscall_trace
 	b	ret_slow_syscall
 
 	.align	5
 #ifdef CONFIG_ALIGNMENT_TRAP
 	.type	__cr_alignment, #object
 __cr_alignment:
-	.word	SYMBOL_NAME(cr_alignment)
+	.word	cr_alignment
 #endif
 
 	.type	sys_call_table, #object
@@ -197,7 +197,7 @@ ENTRY(sys_call_table)
 @ r0 = syscall number
 @ r5 = syscall table
 		.type	sys_syscall, #function
-SYMBOL_NAME(sys_syscall):
+sys_syscall:
 		eor	scno, r0, #OS_NUMBER << 20
 		cmp	scno, #NR_syscalls	@ check range
 		stmleia	sp, {r5, r6}		@ shuffle args
@@ -210,35 +210,35 @@ SYMBOL_NAME(sys_syscall):
 
 sys_fork_wrapper:
 		add	r0, sp, #S_OFF
-		b	SYMBOL_NAME(sys_fork)
+		b	sys_fork
 
 sys_vfork_wrapper:
 		add	r0, sp, #S_OFF
-		b	SYMBOL_NAME(sys_vfork)
+		b	sys_vfork
 
 sys_execve_wrapper:
 		add	r3, sp, #S_OFF
-		b	SYMBOL_NAME(sys_execve)
+		b	sys_execve
 
 sys_clone_wapper:
 		add	r2, sp, #S_OFF
-		b	SYMBOL_NAME(sys_clone)
+		b	sys_clone
 
 sys_sigsuspend_wrapper:
 		add	r3, sp, #S_OFF
-		b	SYMBOL_NAME(sys_sigsuspend)
+		b	sys_sigsuspend
 
 sys_rt_sigsuspend_wrapper:
 		add	r2, sp, #S_OFF
-		b	SYMBOL_NAME(sys_rt_sigsuspend)
+		b	sys_rt_sigsuspend
 
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
-		b	SYMBOL_NAME(sys_sigreturn)
+		b	sys_sigreturn
 
 sys_rt_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
-		b	SYMBOL_NAME(sys_rt_sigreturn)
+		b	sys_rt_sigreturn
 
 sys_sigaltstack_wrapper:
 		ldr	r2, [sp, #S_OFF + S_SP]

arch/arm/kernel/head.S

@@ -35,8 +35,8 @@
 #error TEXTADDR must start at 0xXXXX8000
 #endif
 
-		.globl	SYMBOL_NAME(swapper_pg_dir)
-		.equ	SYMBOL_NAME(swapper_pg_dir), TEXTADDR - 0x4000
+		.globl	swapper_pg_dir
+		.equ	swapper_pg_dir, TEXTADDR - 0x4000
 
 		.macro	pgtbl, reg, rambase
 		adr	\reg, stext
@@ -144,13 +144,13 @@ __entry:
 
 		.type	__switch_data, %object
 __switch_data:	.long	__mmap_switched
-		.long	SYMBOL_NAME(compat)
-		.long	SYMBOL_NAME(__bss_start)
-		.long	SYMBOL_NAME(_end)
-		.long	SYMBOL_NAME(processor_id)
-		.long	SYMBOL_NAME(__machine_arch_type)
-		.long	SYMBOL_NAME(cr_alignment)
-		.long	SYMBOL_NAME(init_thread_union)+8192
+		.long	compat
+		.long	__bss_start
+		.long	_end
+		.long	processor_id
+		.long	__machine_arch_type
+		.long	cr_alignment
+		.long	init_thread_union+8192
 
 		.type	__ret, %function
 __ret:		ldr	lr, __switch_data
@@ -187,7 +187,7 @@ __mmap_switched:
 #endif
 		bic	r2, r0, #2			@ Clear 'A' bit
 		stmia	r8, {r0, r2}			@ Save control register values
-		b	SYMBOL_NAME(start_kernel)
+		b	start_kernel
 
 
 

arch/arm/lib/backtrace.S

@@ -60,7 +60,7 @@ ENTRY(c_backtrace)
 		adr	r0, .Lfe
 		mov	r1, save
 		bic	r2, r2, mask
-		bl	SYMBOL_NAME(printk)	@ print pc and link register
+		bl	printk			@ print pc and link register
 
 		sub	r0, frame, #16
 1002:		ldr	r1, [save, #4]		@ get instruction at function+4
@@ -89,7 +89,7 @@ ENTRY(c_backtrace)
 		.align	0
 1004:		ldr	r0, =.Lbad
 		mov	r1, frame
-		bl	SYMBOL_NAME(printk)
+		bl	printk
 		LOADREGS(fd, sp!, {r4 - r8, pc})
 		.ltorg
 		.previous
@@ -121,12 +121,12 @@ ENTRY(c_backtrace)
 		ldr	r2, [stack], #-4
 		mov	r1, reg
 		adr	r0, .Lfp
-		bl	SYMBOL_NAME(printk)
+		bl	printk
 2:		subs	reg, reg, #1
 		bpl	1b
 		teq	r7, #0
 		adrne	r0, .Lcr
-		blne	SYMBOL_NAME(printk)
+		blne	printk
 		mov	r0, stack
 		LOADREGS(fd, sp!, {instr, reg, stack, r7, pc})
 

arch/arm/lib/delay.S

@@ -11,7 +11,7 @@
 #include <asm/assembler.h>
 		.text
 
-LC0:		.word	SYMBOL_NAME(loops_per_jiffy)
+LC0:		.word	loops_per_jiffy
 
 /*
  * 0 <= r0 <= 2000
@@ -53,5 +53,5 @@ ENTRY(__delay)
 		RETINSTR(movls,pc,lr)
 		subs	r0, r0, #1
 #endif
-		bhi	SYMBOL_NAME(__delay)
+		bhi	__delay
 		RETINSTR(mov,pc,lr)

arch/arm/lib/floppydma.S

@@ -11,16 +11,16 @@
 #include <asm/assembler.h>
 		.text
 
-		.global	SYMBOL_NAME(floppy_fiqin_end)
+		.global	floppy_fiqin_end
 ENTRY(floppy_fiqin_start)
 		subs	r9, r9, #1
 		ldrgtb	r12, [r11, #-4]
 		ldrleb	r12, [r11], #0
 		strb	r12, [r10], #1
 		subs	pc, lr, #4
-SYMBOL_NAME(floppy_fiqin_end):
+floppy_fiqin_end:
 
-		.global	SYMBOL_NAME(floppy_fiqout_end)
+		.global	floppy_fiqout_end
 ENTRY(floppy_fiqout_start)
 		subs	r9, r9, #1
 		ldrgeb	r12, [r10], #1
@@ -29,4 +29,4 @@ ENTRY(floppy_fiqout_start)
 		subles	pc, lr, #4
 		strb	r12, [r11, #-4]
 		subs	pc, lr, #4
-SYMBOL_NAME(floppy_fiqout_end):
+floppy_fiqout_end:

arch/arm/lib/io-acorn.S

@@ -52,7 +52,7 @@ ENTRY(insl)
 ENTRY(outsl)
 		adr	r0, .iosl_warning
 		mov	r1, lr
-		b	SYMBOL_NAME(printk)
+		b	printk
 
 @ Purpose: write a memc register
 @ Proto  : void memc_write(int register, int value);

arch/arm/lib/io-readsw-armv3.S

@@ -14,7 +14,7 @@
 .insw_bad_alignment:
 		adr	r0, .insw_bad_align_msg
 		mov	r2, lr
-		b	SYMBOL_NAME(panic)
+		b	panic
 .insw_bad_align_msg:
 		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
 		.align

arch/arm/lib/io-readsw-armv4.S

@@ -14,7 +14,7 @@
 .insw_bad_alignment:
 		adr	r0, .insw_bad_align_msg
 		mov	r2, lr
-		b	SYMBOL_NAME(panic)
+		b	panic
 .insw_bad_align_msg:
 		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
 		.align

arch/arm/lib/io-writesw-armv3.S

@@ -14,7 +14,7 @@
 .outsw_bad_alignment:
 		adr	r0, .outsw_bad_align_msg
 		mov	r2, lr
-		b	SYMBOL_NAME(panic)
+		b	panic
 .outsw_bad_align_msg:
 		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
 		.align

arch/arm/lib/io-writesw-armv4.S

@@ -14,7 +14,7 @@
 .outsw_bad_alignment:
 		adr	r0, .outsw_bad_align_msg
 		mov	r2, lr
-		b	SYMBOL_NAME(panic)
+		b	panic
 .outsw_bad_align_msg:
 		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
 		.align

arch/arm/lib/uaccess-armo.S

@@ -15,8 +15,8 @@
 
 		.text
 
-		.globl	SYMBOL_NAME(uaccess_user)
-SYMBOL_NAME(uaccess_user):
+		.globl	uaccess_user
+uaccess_user:
 		.word	uaccess_user_put_byte
 		.word	uaccess_user_get_byte
 		.word	uaccess_user_put_half
@@ -84,8 +84,8 @@ USER(		ldrt	r0, [r0])
 
 
 
-		.globl	SYMBOL_NAME(uaccess_kernel)
-SYMBOL_NAME(uaccess_kernel):
+		.globl	uaccess_kernel
+uaccess_kernel:
 		.word	uaccess_kernel_put_byte
 		.word	uaccess_kernel_get_byte
 		.word	uaccess_kernel_put_half
@@ -154,7 +154,7 @@ uaccess_kernel_get_word:
  */
 uaccess_kernel_copy:
 		stmfd	sp!, {lr}
-		bl	SYMBOL_NAME(memcpy)
+		bl	memcpy
 		mov	r0, #0
 		ldmfd	sp!, {pc}^
 

arch/arm/lib/uaccess.S

@@ -544,7 +544,7 @@ USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		ldr	r1, [sp], #4			@ unsigned long count
 		subs	r4, r1, r2			@ bytes left to copy
 		movne	r1, r4
-		blne	SYMBOL_NAME(__memzero)
+		blne	__memzero
 		mov	r0, r4
 		LOADREGS(fd,sp!, {r4 - r7, pc})
 		.previous

arch/arm/mach-arc/head.S

@@ -13,8 +13,8 @@
 #include <linux/linkage.h>
 #include <asm/mach-types.h>
 
-		.globl	SYMBOL_NAME(swapper_pg_dir)
-		.equ	SYMBOL_NAME(swapper_pg_dir),	0x0207d000
+		.globl	swapper_pg_dir
+		.equ	swapper_pg_dir,	0x0207d000
 
 /*
  * Entry point.
@@ -38,14 +38,14 @@ __entry:	cmp	pc, #0x02000000
 		str	r0, [r5]
 
 		mov	fp, #0
-		b	SYMBOL_NAME(start_kernel)
+		b	start_kernel
 
-LC0:		.word	SYMBOL_NAME(_stext)
-		.word	SYMBOL_NAME(__bss_start)		@ r2
-		.word	SYMBOL_NAME(_end)			@ r3
-		.word	SYMBOL_NAME(processor_id)		@ r4
-		.word	SYMBOL_NAME(__machine_arch_type)	@ r5
-		.word	SYMBOL_NAME(init_task_union)+8192	@ sp
+LC0:		.word	_stext
+		.word	__bss_start		@ r2
+		.word	_end			@ r3
+		.word	processor_id		@ r4
+		.word	__machine_arch_type	@ r5
+		.word	init_task_union+8192	@ sp
 arm2_id:	.long	0x41560200
 arm250_id:	.long	0x41560250
 		.align

arch/arm/mach-sa1100/sleep.S

@@ -72,12 +72,12 @@ ENTRY(sa1100_cpu_suspend)
 	@ delay 90us and set CPU PLL to lowest speed
 	@ fixes resume problem on high speed SA1110
 	mov	r0, #90
-	bl	SYMBOL_NAME(udelay)
+	bl	udelay
 	ldr	r0, =PPCR
 	mov	r1, #0
 	str	r1, [r0]
 	mov	r0, #90
-	bl	SYMBOL_NAME(udelay)
+	bl	udelay
 
 
 /* setup up register contents for jump to page containing SA1110 SDRAM controller bug fix suspend code

arch/arm/mm/proc-arm2,3.S

@@ -189,7 +189,7 @@ clear_tables:	ldr	r1, _arm3_set_pgd - 4
  * Params  : pgd	New page tables/MEMC mapping
  * Purpose : update MEMC hardware with new mapping
  */
-		.word	SYMBOL_NAME(page_nr)
+		.word	page_nr
 _arm3_set_pgd:	mcr	p15, 0, r1, c1, c0, 0		@ flush cache
 _arm2_set_pgd:	stmfd	sp!, {lr}
 		ldr	r1, _arm3_set_pgd - 4
@@ -285,8 +285,8 @@ _arm3_name:	.asciz	"ARM 3"
  * Purpose : Function pointers used to access above functions - all calls
  *	     come through these
  */
-		.globl	SYMBOL_NAME(arm2_processor_functions)
-SYMBOL_NAME(arm2_processor_functions):
+		.globl	arm2_processor_functions
+arm2_processor_functions:
 		.word	_arm2_3_check_bugs
 		.word	_arm2_proc_init
 		.word	_arm2_proc_fin
@@ -298,8 +298,8 @@ cpu_arm2_info:
 		.long	armvlsi_name
 		.long	_arm2_name
 
-		.globl	SYMBOL_NAME(arm250_processor_functions)
-SYMBOL_NAME(arm250_processor_functions):
+		.globl	arm250_processor_functions
+arm250_processor_functions:
 		.word	_arm2_3_check_bugs
 		.word	_arm2_proc_init
 		.word	_arm2_proc_fin
@@ -311,8 +311,8 @@ cpu_arm250_info:
 		.long	armvlsi_name
 		.long	_arm250_name
 
-		.globl	SYMBOL_NAME(arm3_processor_functions)
-SYMBOL_NAME(arm3_processor_functions):
+		.globl	arm3_processor_functions
+arm3_processor_functions:
 		.word	_arm2_3_check_bugs
 		.word	_arm3_proc_init
 		.word	_arm3_proc_fin
@@ -340,7 +340,7 @@ arm3_elf_name:	.asciz	"v2"
 		.long	arm2_elf_name
 		.long	0
 		.long	cpu_arm2_info
-		.long	SYMBOL_NAME(arm2_processor_functions)
+		.long	arm2_processor_functions
 		.long	0
 		.long	0
 
@@ -352,7 +352,7 @@ arm3_elf_name:	.asciz	"v2"
 		.long	arm3_elf_name
 		.long	0
 		.long	cpu_arm250_info
-		.long	SYMBOL_NAME(arm250_processor_functions)
+		.long	arm250_processor_functions
 		.long	0
 		.long	0
 
@@ -364,7 +364,7 @@ arm3_elf_name:	.asciz	"v2"
 		.long	arm3_elf_name
 		.long	0
 		.long	cpu_arm3_info
-		.long	SYMBOL_NAME(arm3_processor_functions)
+		.long	arm3_processor_functions
 		.long	0
 		.long	0
 

arch/cris/Config.help

@@ -392,3 +392,26 @@ CONFIG_ETRAX_RESCUE_SER2
 CONFIG_ETRAX_RESCUE_SER3
   Use serial port 3 as the rescue port.
 
+CONFIG_ETRAX_POWERBUTTON_BIT
+  Configure where power button is connected.
+
+CONFIG_ETRAX_ROOT_DEVICE
+  Specifies the device that should be mounted as root file system
+  when booting from flash. The axisflashmap driver adds an additional
+  mtd partition for the appended root file system image, so this option
+  should normally be the mtdblock device for the partition after the
+  last partition in the partition table.
+
+CONFIG_ETRAX_SHUTDOWN_BIT
+  Configure what pin on CSPO-port that is used for controlling power
+  supply.
+
+CONFIG_ETRAX_SOFT_SHUTDOWN
+  Enable this if Etrax is used with a power-supply that can be turned
+  off and on with PS_ON signal. Gives the possibility to detect
+  powerbutton and then do a power off after unmounting disks.
+
+CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+  By enabling this you make sure that the watchdog does not bite while
+  printing oopses. Recommended for development systems but not for
+  production releases.

arch/cris/drivers/Config.help

@@ -572,3 +572,39 @@ CONFIG_ETRAX_PARALLEL_PORT0
 CONFIG_ETRAX_PARALLEL_PORT1
   Say Y here to enable parallel port 1.
 
+CONFIG_ETRAX_ETHERNET_LPSLAVE
+  This option enables a slave ETRAX 100 or ETRAX 100LX, connected to a
+  master ETRAX 100 or ETRAX 100LX through par0 and par1, to act as an
+  Ethernet controller.
+
+CONFIG_ETRAX_ETHERNET_LPSLAVE_HAS_LEDS
+  Enable if the slave has it's own LEDs.
+
+CONFIG_ETRAX_IDE
+  Enable this to get support for ATA/IDE.  You can't use parallel
+  ports or SCSI ports at the same time.
+
+CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+  Selecting LED_on_when_link will light the LED when there is a
+  connection and will flash off when there is activity.
+
+  Selecting LED_on_when_activity will light the LED only when
+  there is activity.
+
+  This setting will also affect the behaviour of other activity LEDs
+  e.g. Bluetooth.
+
+CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK
+  Selecting LED_on_when_link will light the LED when there is a
+  connection and will flash off when there is activity.
+
+  Selecting LED_on_when_activity will light the LED only when
+  there is activity.
+
+  This setting will also affect the behaviour of other activity LEDs
+  e.g. Bluetooth.
+
+CONFIG_ETRAX_SERIAL_PORT0
+  Enables the ETRAX 100 serial driver for ser0 (ttyS0)
+  Normally you want this on, unless you use external DMA 1 that uses
+  the same DMA channels.

arch/cris/drivers/lpslave/e100lpslavenet.c

@@ -313,7 +313,7 @@ e100_open(struct net_device *dev)
 		IO_STATE(R_PAR0_CONFIG, iautofd, noninv)    |
           /* Not used in reverse direction, don't care */
 		IO_STATE(R_PAR0_CONFIG, istrb,   noninv)    |
-          /* Not connected, don't care /
+          /* Not connected, don't care */
 		IO_STATE(R_PAR0_CONFIG, iinit,   noninv)    |
           /* perror is GND and reverse wants 0, noninv */
 		IO_STATE(R_PAR0_CONFIG, iperr,   noninv)    |

arch/i386/Config.help

@@ -826,6 +826,10 @@ CONFIG_X86_MCE_NONFATAL
   or out-of-spec (ie, overclocked) hardware.
   This option only does something on hardware with Intel P6 style MCE.
   (Pentium Pro and above, AMD Athlon/Duron)
+
+CONFIG_X86_MCE_P4THERMAL
+  Enabling this feature will cause a message to be printed when the P4
+  enters thermal throttling.
 				 
 CONFIG_TOSHIBA
   This adds a driver to safely access the System Management Mode of

arch/i386/boot/compressed/head.S

@@ -37,7 +37,7 @@ startup_32:
 	movl %eax,%fs
 	movl %eax,%gs
 
-	lss SYMBOL_NAME(stack_start),%esp
+	lss stack_start,%esp
 	xorl %eax,%eax
 1:	incl %eax		# check that A20 really IS enabled
 	movl %eax,0x000000	# loop forever if it isn't
@@ -55,8 +55,8 @@ startup_32:
  * Clear BSS
  */
 	xorl %eax,%eax
-	movl $ SYMBOL_NAME(_edata),%edi
-	movl $ SYMBOL_NAME(_end),%ecx
+	movl $_edata,%edi
+	movl $_end,%ecx
 	subl %edi,%ecx
 	cld
 	rep
@@ -68,7 +68,7 @@ startup_32:
 	movl %esp,%eax
 	pushl %esi	# real mode pointer as second arg
 	pushl %eax	# address of structure as first arg
-	call SYMBOL_NAME(decompress_kernel)
+	call decompress_kernel
 	orl  %eax,%eax 
 	jnz  3f
 	popl %esi	# discard address

arch/i386/boot/setup.S

@@ -42,6 +42,9 @@
  * if CX/DX have been changed in the e801 call and if so use AX/BX .
  * Michael Miller, April 2001 <michaelm@mjmm.org>
  *
+ * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
+ * by Robert Schwebel, December 2001 <robert@schwebel.de>
+ *
  */
 
 #include <linux/config.h>
@@ -651,8 +654,19 @@ end_move_self:					# now we are at the right place
 #
 # Enable A20.  This is at the very best an annoying procedure.
 # A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin.
+# AMD Elan bug fix by Robert Schwebel.
 #
 
+#if defined(CONFIG_MELAN)
+	movb $0x02, %al			# alternate A20 gate
+	outb %al, $0x92			# this works on SC410/SC520
+a20_elan_wait:
+	call a20_test
+	jz a20_elan_wait
+	jmp a20_done
+#endif
+
+
 A20_TEST_LOOPS		=  32		# Iterations per wait
 A20_ENABLE_LOOPS	= 255		# Total loops to try		
 

arch/i386/config.in

@@ -154,7 +154,9 @@ if [ "$CONFIG_MWINCHIP3D" = "y" ]; then
 fi
 
 bool 'Machine Check Exception' CONFIG_X86_MCE
-dep_bool 'Check for non-fatal errors' CONFIG_X86_MCE_NONFATAL $CONFIG_X86_MCE
+dep_bool 'Check for non-fatal errors on Athlon/Duron' CONFIG_X86_MCE_NONFATAL $CONFIG_X86_MCE
+dep_bool 'check for P4 thermal throttling interrupt.' CONFIG_X86_MCE_P4THERMAL $CONFIG_X86_MCE $CONFIG_X86_LOCAL_APIC
+
 
 tristate 'Toshiba Laptop support' CONFIG_TOSHIBA
 tristate 'Dell laptop support' CONFIG_I8K

arch/i386/defconfig

@@ -58,7 +58,8 @@ CONFIG_X86_TSC=y
 CONFIG_X86_GOOD_APIC=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
 CONFIG_X86_MCE=y
-# CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_X86_MCE_NONFATAL=y
+CONFIG_X86_MCE_P4THERMAL=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
 # CONFIG_MICROCODE is not set

arch/i386/kernel/acpi_wakeup.S

@@ -36,7 +36,7 @@ wakeup_code:
 	orl     $0x80000001, %eax
 	movl	%eax, %cr0
 
-	ljmpl	$__KERNEL_CS,$SYMBOL_NAME(wakeup_pmode_return)
+	ljmpl	$__KERNEL_CS,$wakeup_pmode_return
 
 	.code32
 	ALIGN

arch/i386/kernel/apic.c

@@ -78,6 +78,13 @@ void clear_local_APIC(void)
 		apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
 	}
 
+/* lets not touch this if we didn't frob it */
+#ifdef CONFIG_X86_MCE_P4THERMAL
+	if (maxlvt >= 5) {
+		v = apic_read(APIC_LVTTHMR);
+		apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+	}
+#endif
 	/*
 	 * Clean APIC state for other OSs:
 	 */
@@ -88,6 +95,11 @@ void clear_local_APIC(void)
 		apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
 	if (maxlvt >= 4)
 		apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+	if (maxlvt >= 5)
+		apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
+#endif
 	v = GET_APIC_VERSION(apic_read(APIC_LVR));
 	if (APIC_INTEGRATED(v)) {	/* !82489DX */
 		if (maxlvt > 3)		/* Due to Pentium errata 3AP and 11AP. */
@@ -472,6 +484,7 @@ static void apic_pm_suspend(void *data)
 	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
 	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
 	apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
+	
 	__save_flags(flags);
 	__cli();
 	disable_local_APIC();

arch/i386/kernel/apm.c

@@ -578,7 +578,7 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	__asm__ __volatile__(APM_DO_ZERO_SEGS
 		"pushl %%edi\n\t"
 		"pushl %%ebp\n\t"
-		"lcall *%%cs:" SYMBOL_NAME_STR(apm_bios_entry) "\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
 		"setc %%al\n\t"
 		"popl %%ebp\n\t"
 		"popl %%edi\n\t"
@@ -625,7 +625,7 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
 		__asm__ __volatile__(APM_DO_ZERO_SEGS
 			"pushl %%edi\n\t"
 			"pushl %%ebp\n\t"
-			"lcall *%%cs:" SYMBOL_NAME_STR(apm_bios_entry) "\n\t"
+			"lcall *%%cs:apm_bios_entry\n\t"
 			"setc %%bl\n\t"
 			"popl %%ebp\n\t"
 			"popl %%edi\n\t"

arch/i386/kernel/bluesmoke.c

+/*
+ * arch/i386/kernel/bluesmoke.c - x86 Machine Check Exception Reporting
+ */
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -19,21 +22,12 @@ static int mce_disabled __initdata = 0;
 
 static int banks;
 
-/*
- * If we get an MCE, we don't know what state the caches/TLB's are
- * going to be in, so we throw them all away.
- */
-static void inline flush_all (void)
-{   
-	__asm__ __volatile__ ("invd": : );
-	__flush_tlb();
-}
 
+#ifdef CONFIG_X86_MCE_P4THERMAL
 /*
  *	P4/Xeon Thermal transition interrupt handler
  */
 
-#ifdef CONFIG_X86_LOCAL_APIC
 static void intel_thermal_interrupt(struct pt_regs *regs)
 {
 	u32 l, h;
@@ -49,7 +43,6 @@ static void intel_thermal_interrupt(struct pt_regs *regs)
 		printk(KERN_INFO "CPU#%d: Temperature/speed normal\n", cpu);
 	}
 }
-#endif
 
 static void unexpected_thermal_interrupt(struct pt_regs *regs)
 {	
@@ -71,14 +64,13 @@ asmlinkage void smp_thermal_interrupt(struct pt_regs regs)
 
 static void __init intel_init_thermal(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_LOCAL_APIC
 	u32 l, h;
 	unsigned int cpu = smp_processor_id();
 
 	/* Thermal monitoring */
 	if (!test_bit(X86_FEATURE_ACPI, c->x86_capability))
 		return;	/* -ENODEV */
-	
+
 	/* Clock modulation */
 	if (!test_bit(X86_FEATURE_ACC, c->x86_capability))
 		return;	/* -ENODEV */
@@ -96,16 +88,16 @@ static void __init intel_init_thermal(struct cpuinfo_x86 *c)
 		printk(KERN_INFO "CPU#%d: Thermal monitoring enabled\n", cpu);
 	}
 
-	/* check wether a vector already exists */	
+	/* check whether a vector already exists */	
 	l = apic_read(APIC_LVTTHMR);
 	if (l & 0xff) {
 		printk(KERN_DEBUG "CPU#%d: Thermal LVT already handled\n", cpu);
 		return; /* -EBUSY */
 	}
-	
+
 	wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
 	printk(KERN_INFO "CPU#%d: Thermal monitoring enabled\n", cpu);
-	
+
 	/* The temperature transition interrupt handler setup */
 	l = THERMAL_APIC_VECTOR;		/* our delivery vector */
 	l |= (APIC_DM_FIXED | APIC_LVT_MASKED);	/* we'll mask till we're ready */
@@ -120,8 +112,9 @@ static void __init intel_init_thermal(struct cpuinfo_x86 *c)
 	apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
 
 	return;
-#endif
 }
+#endif /* CONFIG_X86_MCE_P4THERMAL */
+
 
 /*
  *	Machine Check Handler For PII/PIII
@@ -134,32 +127,26 @@ static void intel_machine_check(struct pt_regs * regs, long error_code)
 	u32 mcgstl, mcgsth;
 	int i;
 
-	flush_all();
-
 	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 	if(mcgstl&(1<<0))	/* Recoverable ? */
 		recover=0;
 
 	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl);
-	
-	for(i=0;i<banks;i++)
-	{
+
+	for (i=0;i<banks;i++) {
 		rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
-		if(high&(1<<31))
-		{
+		if(high&(1<<31)) {
 			if(high&(1<<29))
 				recover|=1;
 			if(high&(1<<25))
 				recover|=2;
 			printk(KERN_EMERG "Bank %d: %08x%08x", i, high, low);
 			high&=~(1<<31);
-			if(high&(1<<27))
-			{
+			if(high&(1<<27)) {
 				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
 				printk("[%08x%08x]", ahigh, alow);
 			}
-			if(high&(1<<26))
-			{
+			if(high&(1<<26)) {
 				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
 				printk(" at %08x%08x", ahigh, alow);
 			}
@@ -170,7 +157,7 @@ static void intel_machine_check(struct pt_regs * regs, long error_code)
 			wmb();
 		}
 	}
-	
+
 	if(recover&2)
 		panic("CPU context corrupt");
 	if(recover&1)
@@ -183,7 +170,7 @@ static void intel_machine_check(struct pt_regs * regs, long error_code)
 /*
  *	Machine check handler for Pentium class Intel
  */
- 
+
 static void pentium_machine_check(struct pt_regs * regs, long error_code)
 {
 	u32 loaddr, hi, lotype;
@@ -197,7 +184,7 @@ static void pentium_machine_check(struct pt_regs * regs, long error_code)
 /*
  *	Machine check handler for WinChip C6
  */
- 
+
 static void winchip_machine_check(struct pt_regs * regs, long error_code)
 {
 	printk(KERN_EMERG "CPU#%d: Machine Check Exception.\n", smp_processor_id());
@@ -225,47 +212,50 @@ asmlinkage void do_machine_check(struct pt_regs * regs, long error_code)
 
 
 #ifdef CONFIG_X86_MCE_NONFATAL
-struct timer_list mce_timer;
+static struct timer_list mce_timer;
+static int timerset = 0;
+
+#define MCE_RATE	15*HZ	/* timer rate is 15s */
 
-static void mce_checkregs (unsigned int cpu)
+static void mce_checkregs (void *info)
 {
 	u32 low, high;
 	int i;
+	unsigned int *cpu = info;
 
-	if (cpu!=smp_processor_id())
-		BUG();
+	BUG_ON (*cpu != smp_processor_id());
 
 	for (i=0; i<banks; i++) {
 		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
 
 		if ((low | high) != 0) {
-			flush_all();
 			printk (KERN_EMERG "MCE: The hardware reports a non fatal, correctable incident occured on CPU %d.\n", smp_processor_id());
 			printk (KERN_EMERG "Bank %d: %08x%08x\n", i, high, low);
 
-			/* Scrub the error so we don't pick it up in 5 seconds time. */
+			/* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
 			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
 
 			/* Serialize */
 			wmb();
 		}
 	}
-
-	/* Refresh the timer. */
-	mce_timer.expires = jiffies + 5 * HZ;
-	add_timer (&mce_timer);
 }
 
+
 static void mce_timerfunc (unsigned long data)
 {
-	int i;
+	unsigned int i;
 
 	for (i=0; i<smp_num_cpus; i++) {
 		if (i == smp_processor_id())
-			mce_checkregs(i);
+			mce_checkregs(&i);
 		else
-			smp_call_function (mce_checkregs, i, 1, 1);
+			smp_call_function (mce_checkregs, &i, 1, 1);
 	}
+
+	/* Refresh the timer. */
+	mce_timer.expires = jiffies + MCE_RATE;
+	add_timer (&mce_timer);
 }
 #endif
 
@@ -286,11 +276,11 @@ static void __init intel_mcheck_init(struct cpuinfo_x86 *c)
 
 	if( !test_bit(X86_FEATURE_MCE, c->x86_capability) )
 		return;	
-	
+
 	/*
 	 *	Pentium machine check
 	 */
-	
+
 	if(c->x86 == 5)
 	{
 		/* Default P5 to off as its often misconnected */
@@ -308,20 +298,20 @@ static void __init intel_mcheck_init(struct cpuinfo_x86 *c)
 		printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
 		return;
 	}
-	
+
 
 	/*
 	 *	Check for PPro style MCA
 	 */
-	 		
+ 		
 	if( !test_bit(X86_FEATURE_MCA, c->x86_capability) )
 		return;
-		
+
 	/* Ok machine check is available */
-	
+
 	machine_check_vector = intel_machine_check;
 	wmb();
-	
+
 	if(done==0)
 		printk(KERN_INFO "Intel machine check architecture supported.\n");
 	rdmsr(MSR_IA32_MCG_CAP, l, h);
@@ -343,8 +333,12 @@ static void __init intel_mcheck_init(struct cpuinfo_x86 *c)
 
 	set_in_cr4(X86_CR4_MCE);
 	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id());
-	
-	intel_init_thermal(c);
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+	/* Only enable thermal throttling warning on Pentium 4. */
+	if (c->x86_vendor == X86_VENDOR_INTEL && c->x86 == 15)
+		intel_init_thermal(c);
+#endif
 
 	done=1;
 }
@@ -352,7 +346,7 @@ static void __init intel_mcheck_init(struct cpuinfo_x86 *c)
 /*
  *	Set up machine check reporting on the Winchip C6 series
  */
- 
+
 static void __init winchip_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 lo, hi;
@@ -377,6 +371,7 @@ static void __init winchip_mcheck_init(struct cpuinfo_x86 *c)
 
 void __init mcheck_init(struct cpuinfo_x86 *c)
 {
+
 	if(mce_disabled==1)
 		return;
 
@@ -387,12 +382,17 @@ void __init mcheck_init(struct cpuinfo_x86 *c)
 			if(c->x86 == 6) {
 				intel_mcheck_init(c);
 #ifdef CONFIG_X86_MCE_NONFATAL
-				/* Set the timer to check for non-fatal errors every 5 seconds */
-				init_timer (&mce_timer);
-				mce_timer.expires = jiffies + 5 * HZ;
-				mce_timer.data = 0;
-				mce_timer.function = &mce_timerfunc;
-				add_timer (&mce_timer);
+				if (timerset == 0) {
+					/* Set the timer to check for non-fatal
+					   errors every MCE_RATE seconds */
+					init_timer (&mce_timer);
+					mce_timer.expires = jiffies + MCE_RATE;
+					mce_timer.data = 0;
+					mce_timer.function = &mce_timerfunc;
+					add_timer (&mce_timer);
+					timerset = 1;
+					printk(KERN_INFO "Machine check exception polling timer started.\n");
+				}
 #endif
 			}
 			break;

arch/i386/kernel/head.S

@@ -26,7 +26,7 @@
  * References to members of the boot_cpu_data structure.
  */
 
-#define CPU_PARAMS	SYMBOL_NAME(boot_cpu_data)
+#define CPU_PARAMS	boot_cpu_data
 #define X86		CPU_PARAMS+0
 #define X86_VENDOR	CPU_PARAMS+1
 #define X86_MODEL	CPU_PARAMS+2
@@ -120,8 +120,8 @@ startup_32:
  * No need to cld as DF is already clear from cld above...
  */
 	xorl %eax,%eax
-	movl $ SYMBOL_NAME(__bss_start),%edi
-	movl $ SYMBOL_NAME(_end),%ecx
+	movl $__bss_start,%edi
+	movl $_end,%ecx
 	subl %edi,%ecx
 	rep
 	stosb
@@ -145,7 +145,7 @@ startup_32:
  *
  * Note: %esi still has the pointer to the real-mode data.
  */
-	movl $ SYMBOL_NAME(empty_zero_page),%edi
+	movl $empty_zero_page,%edi
 	movl $512,%ecx
 	cld
 	rep
@@ -154,7 +154,7 @@ startup_32:
 	movl $512,%ecx
 	rep
 	stosl
-	movl SYMBOL_NAME(empty_zero_page)+NEW_CL_POINTER,%esi
+	movl empty_zero_page+NEW_CL_POINTER,%esi
 	andl %esi,%esi
 	jnz 2f			# New command line protocol
 	cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
@@ -162,7 +162,7 @@ startup_32:
 	movzwl OLD_CL_OFFSET,%esi
 	addl $(OLD_CL_BASE_ADDR),%esi
 2:
-	movl $ SYMBOL_NAME(empty_zero_page)+2048,%edi
+	movl $empty_zero_page+2048,%edi
 	movl $512,%ecx
 	rep
 	movsl
@@ -263,11 +263,11 @@ is386:	pushl %ecx		# restore original EFLAGS
 	cmpb $1,%cl
 	je 1f			# the first CPU calls start_kernel
 				# all other CPUs call initialize_secondary
-	call SYMBOL_NAME(initialize_secondary)
+	call initialize_secondary
 	jmp L6
 1:
 #endif
-	call SYMBOL_NAME(start_kernel)
+	call start_kernel
 L6:
 	jmp L6			# main should never return here, but
 				# just in case, we know what happens.
@@ -309,7 +309,7 @@ setup_idt:
 	movw %dx,%ax		/* selector = 0x0010 = cs */
 	movw $0x8E00,%dx	/* interrupt gate - dpl=0, present */
 
-	lea SYMBOL_NAME(idt_table),%edi
+	lea idt_table,%edi
 	mov $256,%ecx
 rp_sidt:
 	movl %eax,(%edi)
@@ -320,7 +320,7 @@ rp_sidt:
 	ret
 
 ENTRY(stack_start)
-	.long SYMBOL_NAME(init_thread_union)+8192
+	.long init_thread_union+8192
 	.long __KERNEL_DS
 
 /* This is the default interrupt "handler" :-) */
@@ -338,7 +338,7 @@ ignore_int:
 	movl %eax,%ds
 	movl %eax,%es
 	pushl $int_msg
-	call SYMBOL_NAME(printk)
+	call printk
 	popl %eax
 	popl %ds
 	popl %es
@@ -356,21 +356,21 @@ ignore_int:
 #define GDT_ENTRIES	(__TSS(NR_CPUS))
 
 
-.globl SYMBOL_NAME(idt)
-.globl SYMBOL_NAME(gdt)
+.globl idt
+.globl gdt
 
 	ALIGN
 	.word 0
 idt_descr:
 	.word IDT_ENTRIES*8-1		# idt contains 256 entries
-SYMBOL_NAME(idt):
-	.long SYMBOL_NAME(idt_table)
+idt:
+	.long idt_table
 
 	.word 0
 gdt_descr:
 	.word GDT_ENTRIES*8-1
-SYMBOL_NAME(gdt):
-	.long SYMBOL_NAME(gdt_table)
+gdt:
+	.long gdt_table
 
 /*
  * This is initialized to create an identity-mapping at 0-8M (for bootup

arch/i386/kernel/i8259.c

@@ -391,6 +391,11 @@ void __init init_IRQ(void)
 	/* IPI vectors for APIC spurious and error interrupts */
 	set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
 	set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+	/* thermal monitor LVT interrupt */
+#ifdef CONFIG_X86_MCE_P4THERMAL
+	set_intr_gate(THERMAL_APIC_VECTOR, smp_thermal_interrupt);
+#endif
 #endif
 
 	/*

arch/i386/kernel/ldt.c

@@ -12,37 +12,137 @@
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 #include <linux/vmalloc.h>
+#include <linux/slab.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/ldt.h>
 #include <asm/desc.h>
 
+#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */
+static void flush_ldt(void *mm)
+{
+	if (current->mm)
+		load_LDT(&current->mm->context);
+}
+#endif
+
+static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
+{
+	void *oldldt;
+	void *newldt;
+	int oldsize;
+
+	if (mincount <= pc->size)
+		return 0;
+	oldsize = pc->size;
+	mincount = (mincount+511)&(~511);
+	if (mincount*LDT_ENTRY_SIZE > PAGE_SIZE)
+		newldt = vmalloc(mincount*LDT_ENTRY_SIZE);
+	else
+		newldt = kmalloc(mincount*LDT_ENTRY_SIZE, GFP_KERNEL);
+
+	if (!newldt)
+		return -ENOMEM;
+
+	if (oldsize)
+		memcpy(newldt, pc->ldt, oldsize*LDT_ENTRY_SIZE);
+	oldldt = pc->ldt;
+	memset(newldt+oldsize*LDT_ENTRY_SIZE, 0, (mincount-oldsize)*LDT_ENTRY_SIZE);
+	wmb();
+	pc->ldt = newldt;
+	pc->size = mincount;
+	if (reload) {
+		load_LDT(pc);
+#ifdef CONFIG_SMP
+		if (current->mm->cpu_vm_mask != (1<<smp_processor_id()))
+			smp_call_function(flush_ldt, 0, 1, 1);
+#endif
+	}
+	wmb();
+	if (oldsize) {
+		if (oldsize*LDT_ENTRY_SIZE > PAGE_SIZE)
+			vfree(oldldt);
+		else
+			kfree(oldldt);
+	}
+	return 0;
+}
+
+static inline int copy_ldt(mm_context_t *new, mm_context_t *old)
+{
+	int err = alloc_ldt(new, old->size, 0);
+	if (err < 0) {
+		printk(KERN_WARNING "ldt allocation failed\n");
+		new->size = 0;
+		return err;
+	}
+	memcpy(new->ldt, old->ldt, old->size*LDT_ENTRY_SIZE);
+	return 0;
+}
+
 /*
- * read_ldt() is not really atomic - this is not a problem since
- * synchronization of reads and writes done to the LDT has to be
- * assured by user-space anyway. Writes are atomic, to protect
- * the security checks done on new descriptors.
+ * we do not have to muck with descriptors here, that is
+ * done in switch_mm() as needed.
  */
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	struct mm_struct * old_mm;
+	int retval = 0;
+
+	init_MUTEX(&mm->context.sem);
+	mm->context.size = 0;
+	old_mm = current->mm;
+	if (old_mm && old_mm->context.size > 0) {
+		down(&old_mm->context.sem);
+		retval = copy_ldt(&mm->context, &old_mm->context);
+		up(&old_mm->context.sem);
+	}
+	return retval;
+}
+
+/*
+ * No need to lock the MM as we are the last user
+ */
+void release_segments(struct mm_struct *mm)
+{
+	if (mm->context.size) {
+		clear_LDT();
+		if (mm->context.size*LDT_ENTRY_SIZE > PAGE_SIZE)
+			vfree(mm->context.ldt);
+		else
+			kfree(mm->context.ldt);
+		mm->context.size = 0;
+	}
+}
+
 static int read_ldt(void * ptr, unsigned long bytecount)
 {
 	int err;
 	unsigned long size;
 	struct mm_struct * mm = current->mm;
 
-	err = 0;
-	if (!mm->context.segments)
-		goto out;
+	if (!mm->context.size)
+		return 0;
+	if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES)
+		bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES;
 
-	size = LDT_ENTRIES*LDT_ENTRY_SIZE;
+	down(&mm->context.sem);
+	size = mm->context.size*LDT_ENTRY_SIZE;
 	if (size > bytecount)
 		size = bytecount;
 
-	err = size;
-	if (copy_to_user(ptr, mm->context.segments, size))
+	err = 0;
+	if (copy_to_user(ptr, mm->context.ldt, size))
 		err = -EFAULT;
-out:
-	return err;
+	up(&mm->context.sem);
+	if (err < 0)
+		return err;
+	if (size != bytecount) {
+		/* zero-fill the rest */
+		clear_user(ptr+size, bytecount-size);
+	}
+	return bytecount;
 }
 
 static int read_default_ldt(void * ptr, unsigned long bytecount)
@@ -53,7 +153,7 @@ static int read_default_ldt(void * ptr, unsigned long bytecount)
 
 	err = 0;
 	address = &default_ldt[0];
-	size = sizeof(struct desc_struct);
+	size = 5*sizeof(struct desc_struct);
 	if (size > bytecount)
 		size = bytecount;
 
@@ -88,24 +188,14 @@ static int write_ldt(void * ptr, unsigned long bytecount, int oldmode)
 			goto out;
 	}
 
-	/*
-	 * the GDT index of the LDT is allocated dynamically, and is
-	 * limited by MAX_LDT_DESCRIPTORS.
-	 */
-	down_write(&mm->mmap_sem);
-	if (!mm->context.segments) {
-		void * segments = vmalloc(LDT_ENTRIES*LDT_ENTRY_SIZE);
-		error = -ENOMEM;
-		if (!segments)
+	down(&mm->context.sem);
+	if (ldt_info.entry_number >= mm->context.size) {
+		error = alloc_ldt(&current->mm->context, ldt_info.entry_number+1, 1);
+		if (error < 0)
 			goto out_unlock;
-		memset(segments, 0, LDT_ENTRIES*LDT_ENTRY_SIZE);
-		wmb();
-		mm->context.segments = segments;
-		mm->context.cpuvalid = 1UL << smp_processor_id();
-		load_LDT(mm);
 	}
 
-	lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->context.segments);
+	lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->context.ldt);
 
    	/* Allow LDTs to be cleared by the user. */
    	if (ldt_info.base_addr == 0 && ldt_info.limit == 0) {
@@ -143,7 +233,7 @@ static int write_ldt(void * ptr, unsigned long bytecount, int oldmode)
 	error = 0;
 
 out_unlock:
-	up_write(&mm->mmap_sem);
+	up(&mm->context.sem);
 out:
 	return error;
 }

arch/i386/kernel/mpparse.c

@@ -116,6 +116,8 @@ static char __init *mpc_family(int family,int model)
 		case 0x0F:
 			if (model == 0x00)
 				return("Pentium 4(tm)");
+			if (model == 0x02)
+				return("XEON(tm)");
 			if (model == 0x0F)
 				return("Special controller");
 	}

arch/i386/kernel/pci-pc.c

@@ -421,8 +421,9 @@ static struct pci_ops * __devinit pci_check_direct(void)
 		    pci_sanity_check(&pci_direct_conf1)) {
 			outl (tmp, 0xCF8);
 			__restore_flags(flags);
-			printk("PCI: Using configuration type 1\n");
-			request_region(0xCF8, 8, "PCI conf1");
+			printk(KERN_INFO "PCI: Using configuration type 1\n");
+			if (!request_region(0xCF8, 8, "PCI conf1"))
+				return NULL;
 			return &pci_direct_conf1;
 		}
 		outl (tmp, 0xCF8);
@@ -438,8 +439,9 @@ static struct pci_ops * __devinit pci_check_direct(void)
 		if (inb (0xCF8) == 0x00 && inb (0xCFA) == 0x00 &&
 		    pci_sanity_check(&pci_direct_conf2)) {
 			__restore_flags(flags);
-			printk("PCI: Using configuration type 2\n");
-			request_region(0xCF8, 4, "PCI conf2");
+			printk(KERN_INFO "PCI: Using configuration type 2\n");
+			if (!request_region(0xCF8, 4, "PCI conf2"))
+				return NULL;
 			return &pci_direct_conf2;
 		}
 	}
@@ -546,10 +548,10 @@ static unsigned long bios32_service(unsigned long service)
 		case 0:
 			return address + entry;
 		case 0x80:	/* Not present */
-			printk("bios32_service(0x%lx): not present\n", service);
+			printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service);
 			return 0;
 		default: /* Shouldn't happen */
-			printk("bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
+			printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
 				service, return_code);
 			return 0;
 	}
@@ -599,7 +601,7 @@ static int __devinit check_pcibios(void)
 				status, signature);
 			return 0;
 		}
-		printk("PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
+		printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
 			major_ver, minor_ver, pcibios_entry, pcibios_last_bus);
 #ifdef CONFIG_PCI_DIRECT
 		if (!(hw_mech & PCIBIOS_HW_TYPE1))
@@ -901,7 +903,7 @@ static void __devinit pcibios_sort(void)
 				}
 			}
 			if (ln == &pci_devices) {
-				printk("PCI: BIOS reporting unknown device %02x:%02x\n", bus, devfn);
+				printk(KERN_WARNING "PCI: BIOS reporting unknown device %02x:%02x\n", bus, devfn);
 				/*
 				 * We must not continue scanning as several buggy BIOSes
 				 * return garbage after the last device. Grr.
@@ -910,7 +912,7 @@ static void __devinit pcibios_sort(void)
 			}
 		}
 		if (!found) {
-			printk("PCI: Device %02x:%02x not found by BIOS\n",
+			printk(KERN_WARNING "PCI: Device %02x:%02x not found by BIOS\n",
 				dev->bus->number, dev->devfn);
 			list_del(&dev->global_list);
 			list_add_tail(&dev->global_list, &sorted_devices);
@@ -970,7 +972,7 @@ struct irq_routing_table * __devinit pcibios_get_irq_routing_table(void)
 			rt->size = opt.size + sizeof(struct irq_routing_table);
 			rt->exclusive_irqs = map;
 			memcpy(rt->slots, (void *) page, opt.size);
-			printk("PCI: Using BIOS Interrupt Routing Table\n");
+			printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n");
 		}
 	}
 	free_page(page);
@@ -1035,7 +1037,7 @@ static void __devinit pcibios_fixup_ghosts(struct pci_bus *b)
 	}
 	if (!seen_host_bridge)
 		return;
-	printk("PCI: Ignoring ghost devices on bus %02x\n", b->number);
+	printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number);
 
 	ln = &b->devices;
 	while (ln->next != &b->devices) {
@@ -1073,7 +1075,7 @@ static void __devinit pcibios_fixup_peer_bridges(void)
 			if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) &&
 			    l != 0x0000 && l != 0xffff) {
 				DBG("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l);
-				printk("PCI: Discovered peer bus %02x\n", n);
+				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
 				pci_scan_bus(n, pci_root_ops, NULL);
 				break;
 			}
@@ -1117,7 +1119,7 @@ static void __devinit pci_fixup_i450gx(struct pci_dev *d)
 	 */
 	u8 busno;
 	pci_read_config_byte(d, 0x4a, &busno);
-	printk("PCI: i440KX/GX host bridge %s: secondary bus %02x\n", d->slot_name, busno);
+	printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", d->slot_name, busno);
 	pci_scan_bus(busno, pci_root_ops, NULL);
 	pcibios_last_bus = -1;
 }
@@ -1130,11 +1132,23 @@ static void __devinit  pci_fixup_umc_ide(struct pci_dev *d)
 	 */
 	int i;
 
-	printk("PCI: Fixing base address flags for device %s\n", d->slot_name);
+	printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", d->slot_name);
 	for(i=0; i<4; i++)
 		d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
 }
 
+static void __devinit  pci_fixup_ncr53c810(struct pci_dev *d)
+{
+    /*
+     * NCR 53C810 returns class code 0 (at least on some systems).
+     * Fix class to be PCI_CLASS_STORAGE_SCSI
+     */
+    if (!d->class) {
+        printk("PCI: fixing NCR 53C810 class code for %s\n", d->slot_name);
+        d->class = PCI_CLASS_STORAGE_SCSI << 8;
+    }
+}
+
 static void __devinit pci_fixup_ide_bases(struct pci_dev *d)
 {
 	int i;
@@ -1226,6 +1240,7 @@ struct pci_fixup pcibios_fixups[] = {
 	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8622,	        pci_fixup_via_northbridge_bug },
 	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8361,	        pci_fixup_via_northbridge_bug },
 	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8367_0,	pci_fixup_via_northbridge_bug },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_NCR,	PCI_DEVICE_ID_NCR_53C810,	pci_fixup_ncr53c810 },
 	{ 0 }
 };
 
@@ -1261,6 +1276,8 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum)
 
 void __devinit pcibios_config_init(void)
 {
+	struct pci_ops *tmp=NULL;
+
 	/*
 	 * Try all known PCI access methods. Note that we support using 
 	 * both PCI BIOS and direct access, with a preference for direct.
@@ -1275,6 +1292,7 @@ void __devinit pcibios_config_init(void)
 		pci_config_write = pci_bios_write;
 	}
 #endif
+	tmp = pci_root_ops;
 
 #ifdef CONFIG_PCI_DIRECT
 	if ((pci_probe & (PCI_PROBE_CONF1 | PCI_PROBE_CONF2)) 
@@ -1290,6 +1308,10 @@ void __devinit pcibios_config_init(void)
 	}
 #endif
 
+	/* if direct access failed, fall back to BIOS access. */
+	if (pci_root_ops == NULL)
+		pci_root_ops = tmp;
+
 	return;
 }
 

arch/i386/kernel/process.c

@@ -475,23 +475,6 @@ void show_regs(struct pt_regs * regs)
 	show_trace(&regs->esp);
 }
 
-/*
- * No need to lock the MM as we are the last user
- */
-void release_segments(struct mm_struct *mm)
-{
-	void * ldt = mm->context.segments;
-
-	/*
-	 * free the LDT
-	 */
-	if (ldt) {
-		mm->context.segments = NULL;
-		clear_LDT();
-		vfree(ldt);
-	}
-}
-
 /*
  * Create a kernel thread
  */
@@ -544,42 +527,17 @@ void flush_thread(void)
 void release_thread(struct task_struct *dead_task)
 {
 	if (dead_task->mm) {
-		void * ldt = dead_task->mm->context.segments;
-
 		// temporary debugging check
-		if (ldt) {
-			printk("WARNING: dead process %8s still has LDT? <%p>\n",
-					dead_task->comm, ldt);
+		if (dead_task->mm->context.size) {
+			printk("WARNING: dead process %8s still has LDT? <%p/%d>\n",
+					dead_task->comm,
+					dead_task->mm->context.ldt,
+					dead_task->mm->context.size);
 			BUG();
 		}
 	}
 }
 
-/*
- * we do not have to muck with descriptors here, that is
- * done in switch_mm() as needed.
- */
-void copy_segments(struct task_struct *p, struct mm_struct *new_mm)
-{
-	struct mm_struct * old_mm;
-	void *old_ldt, *ldt;
-
-	ldt = NULL;
-	old_mm = current->mm;
-	if (old_mm && (old_ldt = old_mm->context.segments) != NULL) {
-		/*
-		 * Completely new LDT, we initialize it from the parent:
-		 */
-		ldt = vmalloc(LDT_ENTRIES*LDT_ENTRY_SIZE);
-		if (!ldt)
-			printk(KERN_WARNING "ldt allocation failed\n");
-		else
-			memcpy(ldt, old_ldt, LDT_ENTRIES*LDT_ENTRY_SIZE);
-	}
-	new_mm->context.segments = ldt;
-	new_mm->context.cpuvalid = ~0UL;	/* valid on all CPU's - they can't have stale data */
-}
-
 /*
  * Save a segment.
  */

arch/i386/kernel/setup.c

@@ -2875,7 +2875,7 @@ void __init cpu_init (void)
 	set_tss_desc(nr,t);
 	gdt_table[__TSS(nr)].b &= 0xfffffdff;
 	load_TR(nr);
-	load_LDT(&init_mm);
+	load_LDT(&init_mm.context);
 
 	/* Clear %fs and %gs. */
 	asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");

arch/i386/kernel/trampoline.S

@@ -67,5 +67,5 @@ gdt_48:
 	.word	0x0800			# gdt limit = 2048, 256 GDT entries
 	.long	gdt_table-__PAGE_OFFSET	# gdt base = gdt (first SMP CPU)
 
-.globl SYMBOL_NAME(trampoline_end)
-SYMBOL_NAME_LABEL(trampoline_end)
+.globl trampoline_end
+trampoline_end:

arch/i386/math-emu/fpu_asm.h

@@ -12,7 +12,7 @@
 
 #include <linux/linkage.h>
 
-#define	EXCEPTION	SYMBOL_NAME(FPU_exception)
+#define	EXCEPTION	FPU_exception
 
 
 #define PARAM1	8(%ebp)

arch/i386/math-emu/fpu_system.h

@@ -20,7 +20,7 @@
    of the stack frame of math_emulate() */
 #define SETUP_DATA_AREA(arg)	FPU_info = (struct info *) &arg
 
-#define LDT_DESCRIPTOR(s)	(((struct desc_struct *)current->mm->context.segments)[(s) >> 3])
+#define LDT_DESCRIPTOR(s)	(((struct desc_struct *)current->mm->context.ldt)[(s) >> 3])
 #define SEG_D_SIZE(x)		((x).b & (3 << 21))
 #define SEG_G_BIT(x)		((x).b & (1 << 23))
 #define SEG_GRANULARITY(x)	(((x).b & (1 << 23)) ? 4096 : 1)

arch/i386/math-emu/reg_norm.S

@@ -83,7 +83,7 @@ L_underflow:
 	/* Convert the exponent to 80x87 form. */
 	addw	EXTENDED_Ebias,EXP(%ebx)
 	push	%ebx
-	call	SYMBOL_NAME(arith_underflow)
+	call	arith_underflow
 	pop	%ebx
 	jmp	L_exit
 
@@ -91,7 +91,7 @@ L_overflow:
 	/* Convert the exponent to 80x87 form. */
 	addw	EXTENDED_Ebias,EXP(%ebx)
 	push	%ebx
-	call	SYMBOL_NAME(arith_overflow)
+	call	arith_overflow
 	pop	%ebx
 	jmp	L_exit
 

arch/i386/math-emu/reg_round.S

@@ -447,7 +447,7 @@ fpu_Arith_exit:
 L_precision_lost_up:
 	push	%edx
 	push	%eax
-	call	SYMBOL_NAME(set_precision_flag_up)
+	call	set_precision_flag_up
 	popl	%eax
 	popl	%edx
 	jmp	L_no_precision_loss
@@ -459,7 +459,7 @@ L_precision_lost_up:
 L_precision_lost_down:
 	push	%edx
 	push	%eax
-	call	SYMBOL_NAME(set_precision_flag_down)
+	call	set_precision_flag_down
 	popl	%eax
 	popl	%edx
 	jmp	L_no_precision_loss
@@ -617,7 +617,7 @@ LPseudoDenormal:
  */
 L_underflow_to_zero:
 	push	%eax
-	call	SYMBOL_NAME(set_precision_flag_down)
+	call	set_precision_flag_down
 	popl	%eax
 
 	push	%eax
@@ -636,7 +636,7 @@ L_underflow_to_zero:
 L_overflow:
 	addw	EXTENDED_Ebias,EXP(%edi)	/* Set for unmasked response. */
 	push	%edi
-	call	SYMBOL_NAME(arith_overflow)
+	call	arith_overflow
 	pop	%edi
 	jmp	fpu_reg_round_signed_special_exit
 

arch/m68k/atari/ataints.c

@@ -168,8 +168,8 @@ asmlinkage void IRQ_NAME(n);						   \
 /* Dummy function to allow asm with operands.  */			   \
 void atari_slow_irq_##n##_dummy (void) {				   \
 __asm__ (__ALIGN_STR "\n"						   \
-SYMBOL_NAME_STR(atari_slow_irq_) #n "_handler:\t"			   \
-"	addql	#1,"SYMBOL_NAME_STR(irq_stat)"+8\n" /* local_irq_count */  \
+"atari_slow_irq_" #n "_handler:\t"					   \
+"	addql	#1,irq_stat+8\n" /* local_irq_count */			   \
 	SAVE_ALL_INT "\n"						   \
 	GET_CURRENT(%%d0) "\n"						   \
 "	andb	#~(1<<(%c3&7)),%a4:w\n"	/* mask this interrupt */	   \
@@ -190,7 +190,7 @@ SYMBOL_NAME_STR(atari_slow_irq_) #n "_handler:\t"			   \
 "	orw	#0x0600,%%sr\n"						   \
 "	andw	#0xfeff,%%sr\n"		/* set IPL = 6 again */		   \
 "	orb 	#(1<<(%c3&7)),%a4:w\n"	/* now unmask the int again */	   \
-"	jbra	"SYMBOL_NAME_STR(ret_from_interrupt)"\n"		   \
+"	jbra	ret_from_interrupt\n"					   \
 	 : : "i" (&kstat.irqs[0][n+8]), "i" (&irq_handler[n+8]),	   \
 	     "n" (PT_OFF_SR), "n" (n),					   \
 	     "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &mfp.int_mk_a)	   \
@@ -272,10 +272,10 @@ asmlinkage void atari_prio_irq_handler( void );
 /* Dummy function to allow asm with operands.  */
 void atari_fast_prio_irq_dummy (void) {
 __asm__ (__ALIGN_STR "\n"
-SYMBOL_NAME_STR(atari_fast_irq_handler) ":
+"atari_fast_irq_handler:
 	orw 	#0x700,%%sr		/* disable all interrupts */
-"SYMBOL_NAME_STR(atari_prio_irq_handler) ":\t
-	addql	#1,"SYMBOL_NAME_STR(irq_stat)"+8\n" /* local_irq_count */
+atari_prio_irq_handler:\t
+	addql	#1,irq_stat+8\n" /* local_irq_count */
 	SAVE_ALL_INT "\n"
 	GET_CURRENT(%%d0) "
 	/* get vector number from stack frame and convert to source */
@@ -285,7 +285,7 @@ SYMBOL_NAME_STR(atari_fast_irq_handler) ":
 	addw	#(0x40-8-0x18),%%d0
 1:	lea	%a0,%%a0
 	addql	#1,%%a0@(%%d0:l:4)
-	lea	"SYMBOL_NAME_STR(irq_handler)",%%a0
+	lea	irq_handler,%%a0
 	lea	%%a0@(%%d0:l:8),%%a0
 	pea 	%%sp@			/* push frame address */
 	movel	%%a0@(4),%%sp@-		/* push handler data */
@@ -294,7 +294,7 @@ SYMBOL_NAME_STR(atari_fast_irq_handler) ":
 	jsr	%%a0@			/* and call the handler */
 	addql	#8,%%sp
 	addql	#4,%%sp
-	jbra	"SYMBOL_NAME_STR(ret_from_interrupt)
+	jbra	ret_from_interrupt"
 	 : : "i" (&kstat.irqs[0]), "n" (PT_OFF_FORMATVEC)
 );
 }
@@ -306,7 +306,7 @@ SYMBOL_NAME_STR(atari_fast_irq_handler) ":
 asmlinkage void falcon_hblhandler(void);
 asm(".text\n"
 __ALIGN_STR "\n"
-SYMBOL_NAME_STR(falcon_hblhandler) ":
+"falcon_hblhandler:
 	orw	#0x200,%sp@	/* set saved ipl to 2 */
 	rte");
 

arch/m68k/fpsp040/skeleton.S

@@ -73,9 +73,9 @@ real_dz:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		| stack frame pointer argument
-	bsrl	SYMBOL_NAME(trap_c)
+	bsrl	trap_c
 	addql	#4,%sp
-	bral	SYMBOL_NAME(ret_from_exception)
+	bral	ret_from_exception
 
 |
 |	Inexact exception
@@ -164,9 +164,9 @@ inex_done:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		| stack frame pointer argument
-	bsrl	SYMBOL_NAME(trap_c)
+	bsrl	trap_c
 	addql	#4,%sp
-	bral	SYMBOL_NAME(ret_from_exception)
+	bral	ret_from_exception
 	
 |
 |	Overflow exception
@@ -190,9 +190,9 @@ ovfl_done:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		| stack frame pointer argument
-	bsrl	SYMBOL_NAME(trap_c)
+	bsrl	trap_c
 	addql	#4,%sp
-	bral	SYMBOL_NAME(ret_from_exception)
+	bral	ret_from_exception
 	
 |
 |	Underflow exception
@@ -216,9 +216,9 @@ unfl_done:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		| stack frame pointer argument
-	bsrl	SYMBOL_NAME(trap_c)
+	bsrl	trap_c
 	addql	#4,%sp
-	bral	SYMBOL_NAME(ret_from_exception)
+	bral	ret_from_exception
 	
 |
 |	Signalling NAN exception
@@ -238,9 +238,9 @@ real_snan:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		| stack frame pointer argument
-	bsrl	SYMBOL_NAME(trap_c)
+	bsrl	trap_c
 	addql	#4,%sp
-	bral	SYMBOL_NAME(ret_from_exception)
+	bral	ret_from_exception
 	
 |
 |	Operand Error exception
@@ -260,9 +260,9 @@ real_operr:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		| stack frame pointer argument
-	bsrl	SYMBOL_NAME(trap_c)
+	bsrl	trap_c
 	addql	#4,%sp
-	bral	SYMBOL_NAME(ret_from_exception)
+	bral	ret_from_exception
 
 	
 |
@@ -288,9 +288,9 @@ real_bsun:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		| stack frame pointer argument
-	bsrl	SYMBOL_NAME(trap_c)
+	bsrl	trap_c
 	addql	#4,%sp
-	bral	SYMBOL_NAME(ret_from_exception)
+	bral	ret_from_exception
 
 |
 |	F-line exception
@@ -309,9 +309,9 @@ real_fline:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		| stack frame pointer argument
-	bsrl	SYMBOL_NAME(trap_c)
+	bsrl	trap_c
 	addql	#4,%sp
-	bral	SYMBOL_NAME(ret_from_exception)
+	bral	ret_from_exception
 
 |
 |	Unsupported data type exception
@@ -331,9 +331,9 @@ real_unsupp:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@- 		| stack frame pointer argument
-	bsrl	SYMBOL_NAME(trap_c)
+	bsrl	trap_c
 	addql	#4,%sp
-	bral	SYMBOL_NAME(ret_from_exception)
+	bral	ret_from_exception
 
 |
 |	Trace exception
@@ -341,7 +341,7 @@ real_unsupp:
 	.global	real_trace
 real_trace:
 	|
-	bral	SYMBOL_NAME(trap)
+	bral	trap
 
 |
 |	fpsp_fmt_error --- exit point for frame format error
@@ -382,7 +382,7 @@ fpsp_done:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	tstl	%curptr@(TASK_NEEDRESCHED)
-	jne	SYMBOL_NAME(ret_from_exception)	| deliver signals,
+	jne	ret_from_exception	| deliver signals,
 						| reschedule etc..
 	RESTORE_ALL
 
@@ -505,7 +505,7 @@ in_ea:
 	.section .fixup,#alloc,#execinstr
 	.even
 1:
-	jbra	SYMBOL_NAME(fpsp040_die)
+	jbra	fpsp040_die
 
 	.section __ex_table,#alloc
 	.align	4

arch/m68k/ifpsp060/fskeleton.S

@@ -80,7 +80,7 @@ _060_real_ovfl:
 	fsave		-(%sp)
 	move.w		#0x6000,0x2(%sp)
 	frestore	(%sp)+
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap	| jump to trap handler
 
 
 |
@@ -99,7 +99,7 @@ _060_real_unfl:
 	fsave		-(%sp)
 	move.w		#0x6000,0x2(%sp)
 	frestore	(%sp)+
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap	| jump to trap handler
 
 |
 | _060_real_operr():
@@ -118,7 +118,7 @@ _060_real_operr:
 	fsave		-(%sp)
 	move.w		#0x6000,0x2(%sp)
 	frestore	(%sp)+
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap	| jump to trap handler
 
 |
 | _060_real_snan():
@@ -137,7 +137,7 @@ _060_real_snan:
 	fsave		-(%sp)
 	move.w		#0x6000,0x2(%sp)
 	frestore	(%sp)+
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap	| jump to trap handler
 
 |
 | _060_real_dz():
@@ -156,7 +156,7 @@ _060_real_dz:
 	fsave		-(%sp)
 	move.w		#0x6000,0x2(%sp)
 	frestore	(%sp)+
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap	| jump to trap handler
 
 |
 | _060_real_inex():
@@ -175,7 +175,7 @@ _060_real_inex:
 	fsave		-(%sp)
 	move.w		#0x6000,0x2(%sp)
 	frestore	(%sp)+
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap	| jump to trap handler
 
 |
 | _060_real_bsun():
@@ -197,7 +197,7 @@ _060_real_bsun:
 	andi.b		#0xfe,(%sp)
 	fmove.l		(%sp)+,%fpsr
 
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap	| jump to trap handler
 
 |
 | _060_real_fline():
@@ -211,7 +211,7 @@ _060_real_bsun:
 | 
 	.global		_060_real_fline
 _060_real_fline:
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap	| jump to trap handler
 
 |
 | _060_real_fpu_disabled():
@@ -250,7 +250,7 @@ _060_real_fpu_disabled:
 |
 	.global		_060_real_trap
 _060_real_trap:
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap	| jump to trap handler
 
 |############################################################################
 

arch/m68k/ifpsp060/iskeleton.S

@@ -76,8 +76,8 @@ _060_isp_done:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	tstl	%curptr@(TASK_NEEDRESCHED)
-	jne	SYMBOL_NAME(ret_from_exception)	| deliver signals,
-						| reschedule etc..
+	jne	ret_from_exception	| deliver signals,
+					| reschedule etc..
 	RESTORE_ALL
 
 |
@@ -113,7 +113,7 @@ _060_real_chk:
 |	bral		_060_real_trace
 
 real_chk_end:
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap			| jump to trap handler
 
 |
 | _060_real_divbyzero:
@@ -153,7 +153,7 @@ _060_real_divbyzero:
 |	bral		_060_real_trace
 
 real_divbyzero_end:
-	bral		SYMBOL_NAME(trap)	| jump to trap handler
+	bral		trap			| jump to trap handler
 
 |##########################
 

arch/m68k/ifpsp060/os.S

@@ -358,7 +358,7 @@ copyinae:
 |
 	.global		_060_real_trace
 _060_real_trace:
-	bral	SYMBOL_NAME(trap)
+	bral	trap
 
 |
 | _060_real_access():
@@ -374,7 +374,7 @@ _060_real_trace:
 |
 	.global		_060_real_access
 _060_real_access:
-	bral	SYMBOL_NAME(buserr)
+	bral	buserr
 
 
 

arch/m68k/kernel/signal.c

@@ -408,7 +408,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext *usc, void *fp,
 			 "2: movesl %4@+,%2\n\t"
 			 "3: movel %2,%/a0@+\n\t"
 			 "   dbra %1,2b\n\t"
-			 "   bral " SYMBOL_NAME_STR(ret_from_signal) "\n"
+			 "   bral ret_from_signal\n"
 			 "4:\n"
 			 ".section __ex_table,\"a\"\n"
 			 "   .align 4\n"
@@ -507,7 +507,7 @@ rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw,
 			 "2: movesl %4@+,%2\n\t"
 			 "3: movel %2,%/a0@+\n\t"
 			 "   dbra %1,2b\n\t"
-			 "   bral " SYMBOL_NAME_STR(ret_from_signal) "\n"
+			 "   bral ret_from_signal\n"
 			 "4:\n"
 			 ".section __ex_table,\"a\"\n"
 			 "   .align 4\n"

arch/m68k/kernel/traps.c

@@ -64,7 +64,7 @@ e_vector vectors[256] = {
 /* nmi handler for the Amiga */
 asm(".text\n"
     __ALIGN_STR "\n"
-    SYMBOL_NAME_STR(nmihandler) ": rte");
+    "nmihandler: rte");
 
 /*
  * this must be called very early as the kernel might

arch/m68k/lib/semaphore.S

@@ -18,7 +18,7 @@
 ENTRY(__down_failed)
 	moveml %a0/%d0/%d1,-(%sp)
 	movel %a1,-(%sp)
-	jbsr SYMBOL_NAME(__down)
+	jbsr __down
 	movel (%sp)+,%a1
 	moveml (%sp)+,%a0/%d0/%d1
 	rts
@@ -27,7 +27,7 @@ ENTRY(__down_failed_interruptible)
 	movel %a0,-(%sp)
 	movel %d1,-(%sp)
 	movel %a1,-(%sp)
-	jbsr SYMBOL_NAME(__down_interruptible)
+	jbsr __down_interruptible
 	movel (%sp)+,%a1
 	movel (%sp)+,%d1
 	movel (%sp)+,%a0
@@ -37,7 +37,7 @@ ENTRY(__down_failed_trylock)
 	movel %a0,-(%sp)
 	movel %d1,-(%sp)
 	movel %a1,-(%sp)
-	jbsr SYMBOL_NAME(__down_trylock)
+	jbsr __down_trylock
 	movel (%sp)+,%a1
 	movel (%sp)+,%d1
 	movel (%sp)+,%a0
@@ -46,7 +46,7 @@ ENTRY(__down_failed_trylock)
 ENTRY(__up_wakeup)
 	moveml %a0/%d0/%d1,-(%sp)
 	movel %a1,-(%sp)
-	jbsr SYMBOL_NAME(__up)
+	jbsr __up
 	movel (%sp)+,%a1
 	moveml (%sp)+,%a0/%d0/%d1
 	rts

arch/m68k/mac/baboon.c

@@ -27,7 +27,9 @@ volatile struct baboon *baboon;
 
 void baboon_irq(int, void *, struct pt_regs *);
 
+#if 0
 extern int macide_ack_intr(struct ata_channel *);
+#endif
 
 /*
  * Baboon initialization.

arch/ppc/platforms/rpxclassic.h

@@ -85,8 +85,8 @@ extern bd_t m8xx_board_info;
 
 /* for pcmcia sandisk */
 #ifdef CONFIG_IDE
-#define MAX_HWIFS 1
-#define ide_request_irq(irq,hand,flg,dev,id)    request_8xxirq((irq),(hand),(flg),(dev),(id))
+# define MAX_HWIFS 1
+# define request_irq(irq,hand,flg,dev,id)    request_8xxirq((irq),(hand),(flg),(dev),(id))
 #endif
 #endif
 

arch/sh/lib/memmove.S

@@ -20,7 +20,7 @@ ENTRY(memmove)
 	jmp	@r0
 	 nop
 	.balign 4
-2:	.long	SYMBOL_NAME(memcpy)
+2:	.long	memcpy
 1:
 	sub	r5,r4		! From here, r4 has the distance to r0
 	tst	r6,r6