Commit 30eea19c authored by Patrick Rudolph's avatar Patrick Rudolph Committed by Guenter Roeck

dt-bindings: hwmon: Add Infineon TDA38640

Add the DT property 'infineon,en-pin-fixed-level' to
indicated that the chip EN pin is at fixed level
or left unconnected(has internal pull-down).
Signed-off-by: default avatarPatrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: default avatarNaresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-by: default avatarConor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230831190731.265099-1-Naresh.Solanki@9elements.com
[groeck: Dropped empty line at end]
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 4381a36a
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/pmbus/infineon,tda38640.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Infineon TDA38640 Synchronous Buck Regulator with SVID and I2C
maintainers:
- Naresh Solanki <naresh.solanki@9elements.com>
description: |
The Infineon TDA38640 is a 40A Single-voltage Synchronous Buck
Regulator with SVID and I2C designed for Industrial use.
Datasheet: https://www.infineon.com/dgdl/Infineon-TDA38640-0000-DataSheet-v02_04-EN.pdf?fileId=8ac78c8c80027ecd018042f2337f00c9
properties:
compatible:
enum:
- infineon,tda38640
reg:
maxItems: 1
infineon,en-pin-fixed-level:
description:
Indicates that the chip EN pin is at fixed level or left
unconnected(has internal pull-down).
type: boolean
required:
- compatible
- reg
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
tda38640@40 {
compatible = "infineon,tda38640";
reg = <0x40>;
};
};
......@@ -151,8 +151,6 @@ properties:
- infineon,slb9645tt
# Infineon SLB9673 I2C TPM 2.0
- infineon,slb9673
# Infineon TDA38640 Voltage Regulator
- infineon,tda38640
# Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
- infineon,tlv493d-a1b6
# Infineon Multi-phase Digital VR Controller xdpe11280
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment