ARM: dts: exynos: Use standard arrays of generic PHYs for EHCI/OHCI devices

Move USB PHYs to a standard arrays for Exynos EHCI/OHCI devices. This
resolves the conflict between Exynos EHCI/OHCI sub-nodes and generic USB
device bindings. Once the Exynos EHCI/OHCI sub-nodes are removed, the
boards can finally provide sub-nodes for the USB devices using generic USB
device bindings.
Suggested-by: Måns Rullgård <mans@mansr.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20190726081453.9456-4-m.szyprowski@samsung.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/boot/dts/exynos4.dtsi

@@ -380,23 +380,8 @@ ehci: ehci@12580000 {
 			clocks = <&clock CLK_USB_HOST>;
 			clock-names = "usbhost";
 			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&exynos_usbphy 1>;
-				status = "disabled";
-			};
-			port@1 {
-				reg = <1>;
-				phys = <&exynos_usbphy 2>;
-				status = "disabled";
-			};
-			port@2 {
-				reg = <2>;
-				phys = <&exynos_usbphy 3>;
-				status = "disabled";
-			};
+			phys = <&exynos_usbphy 1>, <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+			phy-names = "host", "hsic0", "hsic1";
 		};
 
 		ohci: ohci@12590000 {
@@ -406,13 +391,8 @@ ohci: ohci@12590000 {
 			clocks = <&clock CLK_USB_HOST>;
 			clock-names = "usbhost";
 			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&exynos_usbphy 1>;
-				status = "disabled";
-			};
+			phys = <&exynos_usbphy 1>;
+			phy-names = "host";
 		};
 
 		gpu: gpu@13000000 {

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -204,9 +204,8 @@ &cpu0 {
 
 &ehci {
 	status = "okay";
-	port@0 {
-		status = "okay";
-	};
+	phys = <&exynos_usbphy 1>;
+	phy-names = "host";
 };
 
 &exynos_usbphy {
@@ -520,9 +519,6 @@ &mixer {
 
 &ohci {
 	status = "okay";
-	port@0 {
-		status = "okay";
-	};
 };
 
 &pinctrl_1 {

arch/arm/boot/dts/exynos4412-itop-elite.dts

@@ -146,13 +146,8 @@ &ehci {
 	/* In order to reset USB ethernet */
 	samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
 
-	port@0 {
-		status = "okay";
-	};
-
-	port@2 {
-		status = "okay";
-	};
+	phys = <&exynos_usbphy 1>, <&exynos_usbphy 3>;
+	phy-names = "host", "hsic1";
 };
 
 &exynos_usbphy {

arch/arm/boot/dts/exynos4412-odroidu3.dts

@@ -105,12 +105,8 @@ &usb3503 {
 };
 
 &ehci {
-	port@1 {
-		status = "okay";
-	};
-	port@2 {
-		status = "okay";
-	};
+	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+	phy-names = "hsic0", "hsic1";
 };
 
 &sound {

arch/arm/boot/dts/exynos4412-odroidx.dts

@@ -72,9 +72,8 @@ &buck8_reg {
 };
 
 &ehci {
-	port@1 {
-		status = "okay";
-	};
+	phys = <&exynos_usbphy 2>;
+	phy-names = "hsic0";
 };
 
 &mshc_0 {

arch/arm/boot/dts/exynos4412-origen.dts

@@ -88,13 +88,8 @@ &exynos_usbphy {
 &ehci {
 	samsung,vbus-gpio = <&gpx3 5 1>;
 	status = "okay";
-
-	port@1 {
-		status = "okay";
-	};
-	port@2 {
-		status = "okay";
-	};
+	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+	phy-names = "hsic0", "hsic1";
 };
 
 &fimd {

arch/arm/boot/dts/exynos5250.dtsi

@@ -617,12 +617,8 @@ ehci: usb@12110000 {
 
 			clocks = <&clock CLK_USB2>;
 			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy_gen 1>;
-			};
+			phys = <&usb2_phy_gen 1>;
+			phy-names = "host";
 		};
 
 		ohci: usb@12120000 {
@@ -632,12 +628,8 @@ ohci: usb@12120000 {
 
 			clocks = <&clock CLK_USB2>;
 			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy_gen 1>;
-			};
+			phys = <&usb2_phy_gen 1>;
+			phy-names = "host";
 		};
 
 		usb2_phy_gen: phy@12130000 {

arch/arm/boot/dts/exynos54xx.dtsi

@@ -189,26 +189,16 @@ usbhost2: usb@12110000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0x12110000 0x100>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
+			phys = <&usb2_phy 1>;
+			phy-names = "host";
 		};
 
 		usbhost1: usb@12120000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0x12120000 0x100>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
+			phys = <&usb2_phy 1>;
+			phy-names = "host";
 		};
 
 		usb2_phy: phy@12130000 {