Commit 32507b86 authored by Jernej Skrabec's avatar Jernej Skrabec Committed by Maxime Ripard

arm64: dts: allwinner: h6: Move ext. oscillator to board DTs

It turns out that not all H6 boards have external 32kHz oscillator.
Currently the only one known such H6 board is Tanix TX6.

Move external oscillator node from common H6 dtsi to board specific dts
files where present.
Signed-off-by: default avatarJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
parent 91f480d4
...@@ -32,6 +32,13 @@ hdmi_con_in: endpoint { ...@@ -32,6 +32,13 @@ hdmi_con_in: endpoint {
}; };
}; };
ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "ext_osc32k";
};
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
...@@ -275,6 +282,10 @@ &r_pio { ...@@ -275,6 +282,10 @@ &r_pio {
vcc-pm-supply = <&reg_aldo1>; vcc-pm-supply = <&reg_aldo1>;
}; };
&rtc {
clocks = <&ext_osc32k>;
};
&spdif { &spdif {
status = "okay"; status = "okay";
}; };
......
...@@ -32,6 +32,13 @@ hdmi_con_in: endpoint { ...@@ -32,6 +32,13 @@ hdmi_con_in: endpoint {
}; };
}; };
ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "ext_osc32k";
};
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
...@@ -285,6 +292,10 @@ &r_ir { ...@@ -285,6 +292,10 @@ &r_ir {
status = "okay"; status = "okay";
}; };
&rtc {
clocks = <&ext_osc32k>;
};
&uart0 { &uart0 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>; pinctrl-0 = <&uart0_ph_pins>;
......
...@@ -20,6 +20,13 @@ chosen { ...@@ -20,6 +20,13 @@ chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "ext_osc32k";
};
leds { leds {
compatible = "gpio-leds"; compatible = "gpio-leds";
...@@ -197,6 +204,10 @@ &r_ir { ...@@ -197,6 +204,10 @@ &r_ir {
status = "okay"; status = "okay";
}; };
&rtc {
clocks = <&ext_osc32k>;
};
&uart0 { &uart0 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>; pinctrl-0 = <&uart0_ph_pins>;
......
...@@ -21,6 +21,13 @@ chosen { ...@@ -21,6 +21,13 @@ chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "ext_osc32k";
};
hdmi_connector: connector { hdmi_connector: connector {
compatible = "hdmi-connector"; compatible = "hdmi-connector";
type = "a"; type = "a";
...@@ -279,6 +286,10 @@ &r_pio { ...@@ -279,6 +286,10 @@ &r_pio {
vcc-pm-supply = <&reg_aldo1>; vcc-pm-supply = <&reg_aldo1>;
}; };
&rtc {
clocks = <&ext_osc32k>;
};
/* /*
* The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
* flash and eMMC at the same time, as one of them would fail probing. * flash and eMMC at the same time, as one of them would fail probing.
......
...@@ -62,13 +62,6 @@ osc24M: osc24M_clk { ...@@ -62,13 +62,6 @@ osc24M: osc24M_clk {
clock-output-names = "osc24M"; clock-output-names = "osc24M";
}; };
ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "ext_osc32k";
};
pmu { pmu {
compatible = "arm,cortex-a53-pmu"; compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
...@@ -854,7 +847,6 @@ rtc: rtc@7000000 { ...@@ -854,7 +847,6 @@ rtc: rtc@7000000 {
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out", "iosc"; clock-output-names = "osc32k", "osc32k-out", "iosc";
clocks = <&ext_osc32k>;
#clock-cells = <1>; #clock-cells = <1>;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment