dt-bindings: pinctrl: Drop k3

For convenience (less code duplication), the pin controller pin
configuration register values were defined in the bindings header.
These are not some IDs or other abstraction layer but raw numbers used
in the registers.

These constants do not fit the purpose of bindings. They do not
provide any abstraction, any hardware and driver independent ID. In
fact, the Linux pinctrl-single driver actually do not use the bindings
header at all.

Commit f2de003e ("dt-bindings: pinctrl: k3: Deprecate header with
register constants") already moved users to the local header, so, drop
the binding header. See background discussion in [1].

While at it, clean up the MAINTAINERS file which is the only reference
left.

[1]: https://lore.kernel.org/linux-arm-kernel/71c7feff-4189-f12f-7353-bce41a61119d@linaro.org/Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601173831.982429-1-nm@ti.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

MAINTAINERS

@@ -2949,7 +2949,6 @@ F:	Documentation/devicetree/bindings/arm/ti/k3.yaml
 F:	Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
 F:	arch/arm64/boot/dts/ti/Makefile
 F:	arch/arm64/boot/dts/ti/k3-*
-F:	include/dt-bindings/pinctrl/k3.h
 
 ARM/TOSHIBA VISCONTI ARCHITECTURE
 M:	Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>

include/dt-bindings/pinctrl/k3.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides constants for pinctrl bindings for TI's K3 SoC
- * family.
- *
- * Copyright (C) 2018-2021 Texas Instruments Incorporated - https://www.ti.com/
- */
-#ifndef _DT_BINDINGS_PINCTRL_TI_K3_H
-#define _DT_BINDINGS_PINCTRL_TI_K3_H
-
-/*
- * These bindings are deprecated, because they do not match the actual
- * concept of bindings but rather contain pure register values.
- * Instead include the header in the DTS source directory.
- */
-#warning "These bindings are deprecated. Instead, use the header in the DTS source directory."
-
-#define PULLUDEN_SHIFT		(16)
-#define PULLTYPESEL_SHIFT	(17)
-#define RXACTIVE_SHIFT		(18)
-
-#define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
-#define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
-
-#define PULL_UP			(1 << PULLTYPESEL_SHIFT | PULL_ENABLE)
-#define PULL_DOWN		(0 << PULLTYPESEL_SHIFT | PULL_ENABLE)
-
-#define INPUT_EN		(1 << RXACTIVE_SHIFT)
-#define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
-
-/* Only these macros are expected be used directly in device tree files */
-#define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
-#define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
-#define PIN_OUTPUT_PULLDOWN	(INPUT_DISABLE | PULL_DOWN)
-#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
-#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
-#define PIN_INPUT_PULLDOWN	(INPUT_EN | PULL_DOWN)
-
-#define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define AM65X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define AM65X_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define J721S2_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define J721S2_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#define J784S4_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
-#define J784S4_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
-
-#endif