media: i2c: add support for OV4689

Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This
is a 4 Mpx image sensor using the I2C bus for control and the CSI-2
bus for data.

This driver supports following features:
- manual exposure and analog gain control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
  + 2688x1520 at 30 fps

The driver provides all mandatory V4L2 controls for compatibility with
libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver
implements 4 lane mode only at this moment.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

MAINTAINERS

@@ -15227,6 +15227,7 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
+F:	drivers/media/i2c/ov5647.c
 
 OMNIVISION OV5640 SENSOR DRIVER
 M:	Steve Longerbeam <slongerbeam@gmail.com>

drivers/media/i2c/Kconfig

@@ -458,6 +458,19 @@ config VIDEO_OV2740
 	  To compile this driver as a module, choose M here: the
 	  module will be called ov2740.
 
+config VIDEO_OV4689
+	tristate "OmniVision OV4689 sensor support"
+	depends on GPIOLIB && VIDEO_DEV && I2C
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor-level driver for the OmniVision
+	  OV4689 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ov4689.
+
 config VIDEO_OV5640
 	tristate "OmniVision OV5640 sensor support"
 	depends on OF

drivers/media/i2c/Makefile

@@ -80,6 +80,7 @@ obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
 obj-$(CONFIG_VIDEO_OV2680) += ov2680.o
 obj-$(CONFIG_VIDEO_OV2685) += ov2685.o
 obj-$(CONFIG_VIDEO_OV2740) += ov2740.o
+obj-$(CONFIG_VIDEO_OV4689) += ov4689.o
 obj-$(CONFIG_VIDEO_OV5640) += ov5640.o
 obj-$(CONFIG_VIDEO_OV5645) += ov5645.o
 obj-$(CONFIG_VIDEO_OV5647) += ov5647.o