tehuti: use ndo_siocdevprivate

Tehuti only implements private ioctl commands, and implements
them by overriding the ifreq layout, which is broken in
compat mode.

Move it to the ndo_siocdevprivate callback in order to fix this.

Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/tehuti/tehuti.c

@@ -637,7 +637,8 @@ static int bdx_range_check(struct bdx_priv *priv, u32 offset)
 		-EINVAL : 0;
 }
 
-static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
+static int bdx_siocdevprivate(struct net_device *ndev, struct ifreq *ifr,
+			      void __user *udata, int cmd)
 {
 	struct bdx_priv *priv = netdev_priv(ndev);
 	u32 data[3];
@@ -647,7 +648,7 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
 
 	DBG("jiffies=%ld cmd=%d\n", jiffies, cmd);
 	if (cmd != SIOCDEVPRIVATE) {
-		error = copy_from_user(data, ifr->ifr_data, sizeof(data));
+		error = copy_from_user(data, udata, sizeof(data));
 		if (error) {
 			pr_err("can't copy from user\n");
 			RET(-EFAULT);
@@ -669,7 +670,7 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
 		data[2] = READ_REG(priv, data[1]);
 		DBG("read_reg(0x%x)=0x%x (dec %d)\n", data[1], data[2],
 		    data[2]);
-		error = copy_to_user(ifr->ifr_data, data, sizeof(data));
+		error = copy_to_user(udata, data, sizeof(data));
 		if (error)
 			RET(-EFAULT);
 		break;
@@ -688,15 +689,6 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
 	return 0;
 }
 
-static int bdx_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
-{
-	ENTER;
-	if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15))
-		RET(bdx_ioctl_priv(ndev, ifr, cmd));
-	else
-		RET(-EOPNOTSUPP);
-}
-
 /**
  * __bdx_vlan_rx_vid - private helper for adding/killing VLAN vid
  * @ndev: network device
@@ -1860,7 +1852,7 @@ static const struct net_device_ops bdx_netdev_ops = {
 	.ndo_stop		= bdx_close,
 	.ndo_start_xmit		= bdx_tx_transmit,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_do_ioctl		= bdx_ioctl,
+	.ndo_siocdevprivate	= bdx_siocdevprivate,
 	.ndo_set_rx_mode	= bdx_setmulti,
 	.ndo_change_mtu		= bdx_change_mtu,
 	.ndo_set_mac_address	= bdx_set_mac,