Commit 33466d93 authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller

tg3: Prevent send BD corruption

On rare occasions, send BD corruptions can occur.  This patch
fixes the problem by increasing the L1 entry threshold to 4
milliseconds.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent df259d8c
......@@ -6717,6 +6717,13 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32(TG3_CPMU_HST_ACC, val);
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
val = tr32(PCIE_PWR_MGMT_THRESH) & ~PCIE_PWR_MGMT_L1_THRESH_MSK;
val |= PCIE_PWR_MGMT_EXT_ASPM_TMR_EN |
PCIE_PWR_MGMT_L1_THRESH_4MS;
tw32(PCIE_PWR_MGMT_THRESH, val);
}
/* This works around an issue with Athlon chipsets on
* B3 tigon3 silicon. This bit has no effect on any
* other revision. But do not set this on PCI Express
......
......@@ -1697,6 +1697,8 @@
#define PCIE_PWR_MGMT_THRESH 0x00007d28
#define PCIE_PWR_MGMT_L1_THRESH_MSK 0x0000ff00
#define PCIE_PWR_MGMT_L1_THRESH_4MS 0x0000ff00
#define PCIE_PWR_MGMT_EXT_ASPM_TMR_EN 0x01000000
/* OTP bit definitions */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment