Commit 33621da4 authored by Rui Sousa's avatar Rui Sousa Committed by Greg Kroah-Hartman

net: fec: fix multicast filtering hardware setup


[ Upstream commit 01f8902b ]

Fix hardware setup of multicast address hash:
- Never clear the hardware hash (to avoid packet loss)
- Construct the hash register values in software and then write once
to hardware
Signed-off-by: default avatarRui Sousa <rui.sousa@nxp.com>
Signed-off-by: default avatarFugang Duan <fugang.duan@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5d036ccd
......@@ -2968,6 +2968,7 @@ static void set_multicast_list(struct net_device *ndev)
struct netdev_hw_addr *ha;
unsigned int i, bit, data, crc, tmp;
unsigned char hash;
unsigned int hash_high = 0, hash_low = 0;
if (ndev->flags & IFF_PROMISC) {
tmp = readl(fep->hwp + FEC_R_CNTRL);
......@@ -2990,11 +2991,7 @@ static void set_multicast_list(struct net_device *ndev)
return;
}
/* Clear filter and add the addresses in hash register
*/
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
/* Add the addresses in hash register */
netdev_for_each_mc_addr(ha, ndev) {
/* calculate crc32 value of mac address */
crc = 0xffffffff;
......@@ -3012,16 +3009,14 @@ static void set_multicast_list(struct net_device *ndev)
*/
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
if (hash > 31) {
tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
tmp |= 1 << (hash - 32);
writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
} else {
tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW);
tmp |= 1 << hash;
writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
}
if (hash > 31)
hash_high |= 1 << (hash - 32);
else
hash_low |= 1 << hash;
}
writel(hash_high, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
writel(hash_low, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
}
/* Set a MAC change in hardware. */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment